Availability
Showing In Stock Items. Show All 68 Items.
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 336 )
$100.99
—
$102.99
Spools are an alternative to a locker for traction and performance enhancement. Motive Gear mini spools are a favorite of off-road competitors. A differential with a spool setup delivers equal power and traction to both left and right-side rear wheels. Spool solutions are less expensive than lockers and weigh less. Motive Gear offers a full line of mini spools in the most popular applications for differential modification.
( 97 )
$63.99
—
$101.99
Mile Marker Street Master lock-out hubs are perfect replacements for your worn or rusty 4WD hubs. Built to exacting standards, they mix the looks of a chrome cap with a virtually unbreakable, black nylon, reinforced-fiberglass dial and offer smooth operation. They are also available in stainless steel for select applications, and hubs are made by die-casting aluminum into pre-made stainless jackets for the ultimate combination of light weight and corrosion resistance. Need replacement 4WD hubs, replace your old hubs with ones made to be abused--Mile Marker Street Master lockout hubs.
( 8 )
$109.99
Yukon Gear & Axle crush sleeve eliminator kits replace your crush sleeve with a shim and spacer setup. These kits offer an economical way to enhance your setup and make it more precise. Have you ever over-tightened a crush sleeve? You toss it and start over with a new one. Yukon Gear & Axle crush sleeve eliminator kits remove the hassle—so setting preload is easier. Order the kit designed for your axle model application.
( 68 )
$64.99
—
$92.99
Designed for use with 1350 U-joint flanges, Ford Performance Parts Cobra pinion flanges are replacements for the original equipment. They will fit all 8.8 in. rear-drive pinions and offer a perfect fit for your Ford. Why would you go anywhere else for "Blue Oval" parts but Ford Performance Parts?
( 10 )
$57.99
—
$77.99
Mile Marker part-time transfer case conversions are perfect for owners of full-time 4WD vehicles. You can count on these kits to reduce wear and tear on your drivetrain, as well as to create some savings at the gas pump. Each kit has been carefully designed to provide years of trouble-free service.
( 26 )
$67.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$57.99
—
$91.99
Whether starting a new project or replacing an old part, you'll find what's needed with Spicer Drivetrain Products differential carrier cases. Spicer supplies carriers to many OE manufacturers, so the replacement units are every bit as tough as the originals. They'll accept all factory and most aftermarket internal parts, allowing for modifications. Going mild or wild … Spicer Drivetrain differential carrier cases are the place to start. Order the model recommended for your vehicle and axle application.
( 18 )
$99.99
—
$103.99
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 94 )
$74.99
SVL Drivetrain axle shafts support your vehicle's rear-end. Manufactured from SAE-1541 steel and precision heat-treated for optimal hardness and durability, SVL axles have earned the approval of Dana for static ultimate strength, torsional fatigue, and rotating/bending torque. They feature rolled or cut splines (depending on the application), and are available for a wide range of vehicles. Also, SVL rear axle shafts are rigorously tested to ensure that you're getting the best blend of performance and value.
( 19 )
$72.99
—
$105.99
Spicer Drivetrain Products differential bearing kits will complete the parts needed to properly install your Dana Spicer ring and pinion. You can make mountains into mole hills with Spicer axle components, including their differential bearing kits. Order the model designed for your vehicle and axle application.
( 2 )
$88.99
Spicer Drivetrain Products front axle stubs are available for a range of applications. These quality-built steel components fit both right and left sides. When you need replacements, these front axle shafts offer a premium, competitively priced option from a name you know and trust—Spicer.
( 7 )
$99.99
Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.
( 129 )
$94.99
When your vehicle's limited-slip starts acting more like an open differential, you'll need Motive Gear differential clutch packs. These composite clutches restore preload and provide minimal slip before engagement. Most packs provide factory-new hookup, but some available kits make for tight limited-slips. Whether racing, 4-wheeling, or running the streets, limited-slips provide the extra traction to get you where you want to go. Keep these units tight with Motive Gear differential clutch packs.
( 1 )
$106.99
Yukon Gear & Axle minimum install kits are perfect when you just need the basics. They're a low-cost solution for gear changes in newer vehicles where the bearings can be reused. Available for a wide variety of applications, the kits come with high-quality components to ensure a smooth setup. Yukon minimum install kits include: * Pinion seal * Crush sleeve (where applicable) * Complete shim kit * Gear marking compound and brush * Pinion nut, O-ring, baffles, slinger (varies by application) * Extensive instruction manual
( 11 )
$55.89
—
$102.99
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$92.99
Are you setting up a rear-end? These Motive Gear differential carrier shim kits will make the job easier. They come with a variety of shims, so you're sure to find the best fit for your vehicle; plus, they're made of steel for durability. Whether you're installing a new setup or refreshing an old one, you can trust the Motive Gear differential carrier shims designed for your application to make the job a snap.
( 36 )
$51.99
Yukon Gear & Axle Super carrier shims come in handy when setting up your new ring and pinion or carrier. A variety of steel shims is included in the kits. Order the kit designed for fitment with your axle model—then set just the right amount of play between your gears.
( 58 )
$53.99
—
$100.99
Yukon's axle bearing retainer plates are cut from steel to provide the most strength for your axle. They manufacture a full line of top-quality small parts to complete any job—including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. Hold your bearings in place with Yukon axle bearing retainer plates, available for fitment on various applications.
( 2 )
$66.89
Simplify your ring and pinion project. Ford Performance Parts ring and pinion installation kits include everything you need for changing your ring and pinion gear. All components are high-quality genuine Ford parts to ensure a hassle-free installation.
( 61 )
$55.99
Spicer Drivetrain Products pinion shims help to properly seat your pinion gear. These steel inner and outer components assist you in setting up the proper depth and preload for your specific application (confirm fitment). Experience OE fit and performance with Spicer Drivetrain differential carrier bearing shims.
( 1 )
$81.99
BCA Bearings differential bearing kits consist of all the essential high-quality bearings, seals, and other key components necessary to properly complete a rebuild. With extensive coverage of popular applications, BCA differential kits are built to meet or exceed OE specifications, ensuring long service life. Order the kit designed to fit your application.
( 1 )
$89.99
Time, rust, and sharp or heavy objects take their toll on diff covers. Spicer Drivetrain Products genuine OE differential covers are manufactured to original standards so they fit just right every time. These steel covers include the filler plug and hardware so you can bolt them right up. Choose the cover model needed for your particular axle size.
( 6 )
$99.99
Certain high numeric ratio gear sets require special notched crosspins for proper installation. These Yukon Gear & Axle crosspins and shafts are made for some of the Yukon-designed ring and pinion sets that need aftermarket crosspins and shafts to work with their parts. The differential components are available for more than two dozen axle models, so match your vehicle to the proper direct-fit replacement. They're manufactured from hardened steel or chromoly for maximum durability.
( 10 )
$52.99
—
$70.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
