Availability
On Sale
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,542.95
—
$2,876.95
$2,288.66
—
$2,589.26
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 17 )
$2,349.95
—
$2,549.95
$2,113.95
—
$2,293.95
On Sale
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,449.95
—
$2,549.95
$2,203.95
—
$2,293.95
On Sale
If you need the world's finest high performance street/strip small block Ford heads, then check out AFR's 185cc emissions-legal Renegade Street cylinder heads (CARB E.O. #250-3). With lightweight 8mm, 2.020 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 or 72cc, and 68cc exhaust ports, AFR's 185cc Ford cylinder heads are designed for 302-351 c.i.d. engines operating from 1,500 to 6,500 rpm. A 3/4 in. thick head deck makes the AFR heads ideal for nitrous or blower applications. These heads will not accept rail rocker arms, and hardened push rods are required on models designed for stud mount rocker arms.
( 37 )
$2,328.90
$2,212.55
On Sale
AFR 220cc SBF Renegade 20 Degree Competition Heads are the largest, best-flowing choice to top your small block Ford. These power-producing cylinder heads are born of A356 aluminum castings and feature intake ports, exhaust ports, and combustion chambers that are all 100 percent CNC-ported. Renegades are outfitted with lightweight 8mm, 2.100 in. intake valves and 1.570 in. exhaust valves to move massive amounts of air. They come with either combustion chamber volumes of 58 or 72cc accompanied by 70cc exhaust ports, which are raised .375 in. higher than stock. Plus, AFR's trademark 3/4 in. thick cylinder head deck makes them ideal for heavy nitrous or blower applications. Choose the flow characteristics that can give your Ford the power to win—AFR 220cc SBF Renegade 20 degree competition heads.
( 12 )
$2,837.10
—
$3,143.70
$2,695.15
—
$2,986.80
On Sale
If you're looking for the world's finest street/strip heads available, then AFR's 205cc Renegade Race cylinder heads are your answer. With lightweight 8mm 2.080 in. intake and 1.600 in. exhaust valves, these heads move tremendous volumes of air through conservative runner volumes, spelling big torque and horsepower numbers. AFR's trademark 3/4 in. thick head deck makes them ideal for heavy nitrous or blower applications. They even offer an available nitrous or blower exhaust port option featuring a 73cc ultra high-flowing exhaust port.
( 13 )
$2,763.60
—
$3,014.55
$2,625.80
—
$2,864.25
On Sale
Holley's Ford 7.3L Godzilla high-mount accessory drive complete kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$2,599.95
—
$3,199.95
$2,338.95
—
$2,878.95
On Sale
For the ultimate small block Ford street car, consider AFR 165cc SBF Renegade 20 degree street heads. Unlike some aftermarket heads, AFR's Ford cylinder heads (CARB E.O. # D250-3) fit all of your stock components; no special parts are required! With lightweight 8mm, 1.900 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 and 60cc, and 68cc exhaust ports, these emissions-legal aluminum cylinder heads are perfect for 289 and 302 engines operating from idle to 6,000 rpm. A 3/4 in. thick head deck makes the heads ideal for nitrous or blower applications. Renegade cylinder heads will not accept rail rocker arms, and hardened pushrods are required on models designed for stud mount rocker arms.
( 28 )
$2,328.90
$2,212.55
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$2,249.95
$2,023.95
On Sale
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$3,633.99
—
$5,561.99
$3,270.59
—
$5,005.79
On Sale
Are you building your own personal street/strip weapon? These AFR 195cc SBF Competition cylinder heads are designed for you. To make big horsepower, you need heads that can flow large amounts of air--that's where AFR, the masters of airflow come in. These heads feature a 195cc intake port, 70cc exhaust ports, and your choice of 58 or 72cc combustion chambers to complement your engine. To get the fuel and air in and out efficiently, AFR uses lightweight 8mm 2.050 intake valves and 1.600 exhaust valves. The thick deck makes these heads ideal for nitrous or blower applications with the optional nitrous/blower exhaust port. These heads are most at home on performance engines operating primarily between 2,000 and 7,000 rpm. Dominate the street and strip with the help of AFR and these 195cc SBF Competition cylinder heads.
( 1 )
$2,686.95
—
$2,947.35
$2,552.65
—
$2,799.65
On Sale
Holley High-Mount complete accessory systems offer exceptional clearance for swap applications when your chassis clearance is very limiting. They mount your accessories higher on the engine with many configurations and accessory options available. Holley High-Mount complete accessory systems are available in a natural, black, or polished finish. Order the kit designed to fit your LS/LT engine.
Not Yet Reviewed
$2,299.95
—
$2,649.95
$2,068.95
—
$2,383.95
On Sale
AFR 280cc BBF Bullitt 14 degree cylinder heads are your shot to outgun the competition! They feature partially CNC-ported intakes, exhausts, and chambers, A356 aluminum castings, and high-quality components throughout with standard exhaust port locations. This clean-sheet redesign of their Bullitt cylinder heads deliver a decreased overall runner size, a more consistent cross-sectional area, carefully shaped combustion chambers, and repositioned valves to complement the intake and exhaust port design. Together they improve engine response, providing increases in horsepower and torque. The 280cc Bullitt heads are recommended for street, towing, or street/strip engines with displacements up to 477 cu. in., operating up to 6,200 rpm. Load your engine for performance with AFR Bullitts!
( 2 )
$2,499.00
—
$2,979.90
$2,374.05
—
$2,831.00
On Sale
Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub. Nearly 700 models are available for specific vehicle, bolt pattern, and axle applications.
( 8 )
$2,494.95
—
$2,949.95
$2,244.95
—
$2,653.95
On Sale
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,049.95
—
$3,249.95
$2,743.95
—
$2,923.95
On Sale
Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.
( 2 )
$2,699.00
$2,294.15
On Sale
BD Diesel remanufactured turbo head units use the latest in aerodynamic technology and materials that feature lightweight, extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. They feature a new look with natural finished cast aluminum that meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured turbo head units won't let you down.
Not Yet Reviewed
$2,387.00
$2,148.30
On Sale
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 4 )
$4,095.00
$3,890.25
On Sale
AFR 195cc SBF competition cylinder heads feature 100 percent CNC-machined intake ports, exhaust ports, and combustion chambers. Manufactured in A356 aluminum and assembled with high-quality components, these AFR 195cc SBF competition heads are recommended for displacements up to 408 cu. in., and operating up to 6500-6800 rpm. They are not compatible with OEM pistons. They are available with or without EGR and air pump, as well as with either 58cc or 72cc chamber sizes. Components for these AFR cylinder heads include: * Competition 5-angle valve job * 8mm bead lock intake valve * 8mm bead lock exhaust valve * PAC racing spring 1.270 in. O.D. hydraulic roller dual valve spring; 155 lbs. on seat, .650 in. maximum lift, maximum rpm 7000 to 7200 * 7 degree chromoly retainers * 7 degree bead lock valve keepers * 7/16 in. rocker studs * Adjustable 5/16 in. guide plates * Viton® valve seals * Hardened valve spring I.D. locator * Ductile iron intake valve seats 2.131 in. O.D x 1.680 in. I.D x .375 in. deep * Ductile iron exhaust valve seats 1.650 in. O.D x 1.350 in. I.D x .375 in. deep * Bronze valve guides * Air injector reducer bushing
( 3 )
$2,947.35
$2,799.65
On Sale
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 30 )
$2,442.45
—
$2,748.35
$2,056.80
—
$2,314.40
On Sale
All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.
( 15 )
$2,295.00
—
$3,095.00
$2,065.50
—
$2,785.50
On Sale
AFR 315cc BBF Bullitt 14 degree cylinder heads provide the ultimate shot to outgun the competition! They feature 100 percent CNC-ported intakes, exhausts, and chambers, A356 aluminum castings, and high-quality components throughout with .250 in. raised exhaust port locations. This clean-sheet redesign of their Bullitt cylinder heads delivers a decreased overall runner size, a more consistent cross-sectional area, carefully shaped combustion chambers, and repositioned valves to complement the intake and exhaust port design. Together they improve engine response, providing increases in horsepower and torque. The 315cc Bullitt heads are best suited for large displacement high-rpm big block Ford racing engines or radical "Pro-Street"-style builds. Load your engine for performance with AFR Bullitts!
( 1 )
$3,314.85
—
$3,778.95
$3,149.25
—
$3,590.05
On Sale
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$2,649.95
$2,383.95
On Sale
No more cookie-cutter supercharger kits! With these NOVI-2000 Mustang tuner supercharger kits from Paxton, you can custom-tune to fit your heavily modified Mustang. These are non-tuned kits that let you do the calibrations. The heart of these kits is the race-proven NOVI-2000RR reverse rotation supercharger that is capable of extreme boost numbers for extended time periods. The kits come with 1/2 in. thick, black anodized billet aluminum mounting brackets, a cast aluminum rock-honed discharge tube, a high-flow air filter, an air inlet assembly, oil lines, and an air/air charge cooler assembly. Power increases will vary, depending upon the fuel system and computer chip calibration. These systems do not include a fuel system or calibration components. An aftermarket fuel pump, injectors, and ECM tuning will be required for proper operation. To eliminate the need for an extra belt, they use the NOVI-2000RR reverse rotation unit. This allows the drive pulley to be spun by the engine accessory belt, eliminating the need for an additional supercharger drive system.
Not Yet Reviewed
$5,268.99
—
$5,518.99
$4,742.09
—
$4,967.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
