Availability
Showing In Stock Items. Show All 66 Items.
Tremec offers a variety of TKX 5-speed manual transmission for select GM and Ford applications. Each model features different gear ratios. Order the transmission best suited for your vehicle. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * Input Shaft: 26-Spline (requires 26-spline clutch disk) * Output Shaft: 31 Spline * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety
( 43 )
$2,895.00
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 55 )
$2,132.95
—
$2,182.95
Ford Performance Super-Duty T-5 transmissions are world class components for your hardcore street machine. Features include: * Heavy-duty "World Class" T-5 5-speed manual transmission with short-throw shifter * 300 ft./lbs. torque capacity * Double-moly 2nd speed, 3rd speed and countershaft cluster gears * Carbon-fiber 3-4 blocker rings * Improved synchronizers and bearings * 1-1/16 in. diameter 10-tooth input spline * 28-tooth output spline * 7-tooth speedometer drive gear * Cobra-style pocket bearing
( 32 )
$2,286.99
These Ford Performance Parts Tremec 6-speed transmissions are designed to withstand the abuse of the street or strip. The hardened internals are built to withstand up to 700 ft.-lbs. of torque, while still giving you quick and precise shifts throughout the rev range. These T56 Magnum transmissions come equipped with multiple shifter mounting options and provisions for either an electronic or mechanical speedometer, making them very versatile. Whether you're building a drag car, hot rod, or just wanting to beef up your existing system, these Ford Performance Parts Tremec 6-speed transmissions are the answer you are looking for.
( 4 )
$3,899.99
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 151 )
$3,349.95
—
$3,375.95
A must for your 2015 and later model Mustang—Ford Performance Parts half shaft upgrade axles deliver a robust drivetrain solution to support the higher torque loads of your power-producing muscle car. These better-than-stock performance shafts feature larger diameters, proprietary materials, and CNC-machining—which makes them a stronger and healthier option for your high-powered, sticky-tire-running machine. And with their anti-wheel hop technology, your Mustang will surely put its power to the pavement. Factory half shafts can't handle the additional stresses of your modified ride; for optimum performance, install the Ford Performance Parts half shaft upgrade axles designed for your submodel.
( 2 )
$2,274.99
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 3 )
$4,095.00
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$3,974.95
—
$4,293.95
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$2,174.99
—
$4,100.99
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$3,995.95
—
$4,095.95
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,187.00
—
$2,662.20
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$4,000.00
—
$4,700.00
RCV Performance Ultimate CV axles simply replace your weak axle shafts with a high-strength design. Tests prove they are twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power, there are no worries. Ultimate CV axles are low maintenance and operate with a smoothness you can feel--whether off-road or on the street. And they back it all with a "No Questions Asked" limited lifetime warranty. Available for many vehicles, select the RCV Ultimate axle set designed for truck, SUV, or Jeep.
Not Yet Reviewed
$2,899.95
Holley transmission installation kits come complete with everything you need to bolt a T5 transmission to a 28- or 50-ounce externally balanced small block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5-pound, 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included
Not Yet Reviewed
$2,149.95
TCI Super StreetFighter transmission packages are the perfect solution for street cruisers who want excellent street performance and long-lasting durability. Intended for normally aspirated vehicles powered by engines producing between 725 and 1,025+ hp, depending on the application, the TCI Super StreetFighter packages feature the many of the same benefits as StreetFighter transmission packages with certain internal upgrades, including higher performance friction clutches and bands, as well as heavy-duty hard parts. The Super StreetFighter transmission offers both manual and automatic shift options to give you the power and shifts you want for the strip, or easy driving for the street. The packages include the torque converter with furnace-brazed fins, needle bearings, hardened pre-ground pump hubs, Max Shift street performance fluid, a dipstick, and transmission cooler. With a TCI Super StreetFighter transmission package installed, you'll be ready to take on the streets—and beyond!
( 2 )
$3,086.95
—
$4,286.95
Mantic Clutch USA offers 9000 Series triple-disc clutch and flywheel kits for a wide range of vehicles—including muscle and sports cars like Corvette, Camaro, Mustang, Challenger, Viper, and more. These ultimate combos include everything needed to replace your worn-out clutch, including a matched lightweight flywheel. They're perfect for any supercharger, nitrous, N/A or turbo car that needs a durable rebuildable clutch. If a single or twin disc won't handle the power, Mantic triple disc is the big boy upgrade for big power cars. Order the kit recommended for your vehicle. Product features: * SFI-approved 1.1 * All-billet construction * No flex at high-RPM * Light pedal feel * High torque capacity * All-in-one complete kit * Lightened aluminum flywheel * Completely rebuildable * 1515 torque capacity at crank * 1250-1285 torque capacity at wheels * NOTE: Capacity will vary with use and type of power-adder being utilized Complete kits include: * Lightened aluminum flywheel (12 lbs.) * Triple disc clutches * Billet intermediate plates * Ceremetalic friction material * New OE hydraulic release bearing * New flywheel and clutch bolts * Install hardware * Aluminum carrying case * Detailed instructions
Not Yet Reviewed
$2,662.20
—
$3,418.20
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$2,606.95
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$2,159.00
South Bend Clutch Super Street dual disc clutch kits are offered for a range of applications and setups. These clutch kits are made using high performance materials and include everything you need for your clutch installation. When it comes to street performance, you can count on South Bend for top-quality components.
( 1 )
$2,088.97
ATS Diesel Performance Stage 2 transmission packages eliminate the factory weaknesses and design flaws. Your transmission is stout enough to handle stock power, but what happens when the power is modified and goes above and beyond? Stage 2 packages deliver not only the ATS Five Star billet torque converters with patented Vikus clutch drives and deep pans, but also their revolutionary Co-Pilot electronic transmission controller or billet input shaft (depending on your application). All high-stress areas of the case are reinforced, and the external surface is sealed. Racer, puller, or long-hauler, ATS Diesel Stage 2 transmission packages will give you the edge.
( 1 )
$5,196.80
Clearance
Cardone drive axle assemblies are remanufactured units featuring high quality components to increase reliability and exceed customer expectations. These internal components undergo rigorous testing to minimize the risk of noise and improve real world drivability. Each unit is built to withstand the rigors that towing and heavy duty use places on the internal and external components. Drive axle assemblies are ready for your next drive to the job site, off-road adventure, or daily commute. Features include: * All bearing pre-loads, axle housings, and shafts are inspected using precision measuring equipment. * Every unit is tested for drivability by checking the locking mechanism, if applicable, and verifying that there is no gear or bearing noise. * Housing is powder-coated for maximum corrosion protection that further enhances on-car performance. * New O.E. ring and pinion gears are inspected for correct backlash and wear patterns. * Units are remanufactured using O.E. quality bearings, dust shields, seals and gaskets * Units come pre-filled with oil.
Not Yet Reviewed
$2,983.99
$2,799.50
Detroit Speed Ford 9 in. QUADRALink axle housings are great beginnings to a strong finish. Detroit Speed housing features and benefits: * Heavy-duty round back housing * TIG-welded 3 in. tubes with .218 wall thickness * Billet Torino ends * QUADRALink brackets are TIG-welded * Axle vent * Fill and drain plugs included * Available in bare finish or satin black powdercoat * Accepts 2.5 in. offset rear brake packages from AP, Baer, or Wilwood
Not Yet Reviewed
$2,147.99
RevMax offers Stage 5 Billet Quad Clutch Insignia Converters for a variety of applications, including many Ford trucks from 2011 and up. These torque converters are designed for those who have heavily modified engines or for those who tow heavy weights. They're the culmination of over two years R&D. Each converter features four lockup clutches and retains the factory damper assembly to provide extremely smooth converter apply. Even with twice the holding capacity of a stock converter, most RevMax customers rate these quad units as smooth as their original stock dual disc. RevMax Stage 5 converters have no horsepower or torque limitations. Additional details: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance quad disc lockup friction * RevMax proprietary CNC-machined stator designs * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested * TCRS computerized high-speed balancing to less than 5 gram * Runout tolerances of less than .005
Not Yet Reviewed
$2,399.00
RCV Ultimate IFS CV axles for independent front suspension are designed to overcome the limitations of your axle shafts. They provide increased strength that original equipment axle shafts just can't match--even if you have big tires and big power, there are no worries. Ultimate IFS CV axles are low maintenance, and they meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness, and control of your IFS. Equip your vehicle with RCV race-proven materials and design, so you can "Put the power down with confidence!" Select the Ultimate IFS axle set designed for your vehicle.
( 1 )
$2,299.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
