Availability
Showing In Stock Items. Show All 61 Items.
On Sale
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,876.95
$2,288.66
—
$3,099.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 18 )
$2,349.95
—
$2,549.95
$2,113.95
—
$2,293.95
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$3,633.99
—
$4,215.99
The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates
Not Yet Reviewed
$2,436.00
—
$2,478.00
BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.
( 2 )
$2,040.95
—
$3,170.00
Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.
( 2 )
$2,699.00
PowerMax Performance Diesel turbochargers supply your light-duty diesel with the best components for optimizing power, response, and efficiency. PowerMax turbochargers are quick-spooling, high-flowing turbochargers with the right blend of design features that will upgrade power and torque, while lowering EGTs for select diesel trucks. Whether you own a Ford, Dodge, or GM diesel pickup truck, PowerMax has a ball-bearing turbocharger for you! Turbocharger and installation instructions, as well as other components needed for your specific application are included. Features and benefits of PowerMax turbochargers: * Large bore inducer--allows greater airflow for high performance diesels with increased fuel flow * Advanced design compressor wheels--extremely high-efficiency, backward-curved impellers, which allow for a broad airflow range to match the needs of diesels * Exclusive true angular-contact ball bearings--meaning the turbo spools up to 15 percent faster, is capable of high-thrust loads seen in high performance/high-boost applications, and increases overall turbo efficiency by reducing power consumption by nearly 50 percent over traditional journal bearing designs * Performance enhancing oil restrictor--optimizes oil flow for proper lubrication and cooling, while limiting turbo rotational drag which robs power and efficiency * Divided turbine housing--divider wall within the turbine volute optimizes pulse gas energy, which gives greater response and turbine efficiency during low-end and mid-range operation * Ultra-high pressure/high-efficiency turbine--extracts a maximum of energy from the engine's exhaust. Using GMR235 super alloy, the turbine wheel design is optimized for high exhaust flow, and low weight to reduce moment of inertia assisting in crisp response to changes in engine speed * Turbine outlet connection--designed to fit as a direct drop-in to enhance the ease of upgrading stock turbos * Turbine heat shielding--PowerMax utilizes a heat shield to create "dead air space" insulation barrier to keep high exhaust heat energy in the turbine to be converted to mechanical energy, and away from bearings and oil * Design optimized turbine housing--advanced 3D modeling and computational fluid dynamics are used to optimize the volute shape, and the housing is also equipped with an adjustable wastegate allowing adjustment for optimum boost levels * Oil control and seal--a double-row flinger which drives drain oil away from the gas seal rings virtually eliminates compressor oil sealing problems
( 3 )
$2,219.99
—
$3,371.99
Injector Dynamics ID2600x fuel injectors are developed specifically for use with liquid fuels, featuring corrosion-resistant internals, and long-term compatibility with ethanol and methanol. ID2600-XDS fuel injectors have the highest flow rate of any injectors offered by Bosch and flows 50 percent more than the ID1700x units. Injector Dynamics ID2600x fuel injectors feature Dual Slope Matching, a method of matching the flow rate in both the linear and nonlinear operating range, to provide better cylinder-to-cylinder consistency at low pulse widths.
Not Yet Reviewed
$2,160.90
—
$2,940.00
On Sale
FiTech offers Ultra Port EFI SBF 351W systems for a variety of Ford Windsor applications from the 1960s, '70s, '80s, and '90s. These fuel injection systems are compatible with a variety of fuels, including gasoline, Flex, alcohol, and methanol. Depending on the model you select, the units are rated for 500, 750, or 1,000 hp with gas. Their cast aluminum throttle bodies come in a polished, black, or gold finish. Order the Ultra Port EFI 351W system recommended for your vehicle.
Not Yet Reviewed
$2,979.00
—
$3,340.00
$2,383.20
—
$2,672.00
If you hear excessive whistling noises or believe your stock turbo is damaged, you need Standard Motor stock replacement new turbochargers. These 100 percent new units are designed for a direct-fit installation into specific gasoline or diesel applications. They come ready to roll with high-grade materials and complete gasket kits to ease installation.
( 1 )
$2,276.99
Now you can get more performance from your diesel with Aeromotive diesel lift pump kits! They're built with features you'll appreciate, such as: Precise pressure control via the Aeromotive convoluted diaphragm regulator; a fuel pressure gauge for accurate system pressure monitoring; a built-in check valve to keep the system primed; a submersible motor design with no dynamic shaft seals to erode; and a CAT 2-micron fuel filter. Duramax kits include a "fail safe" valve. In the event of failure or a no-run condition, the valve opens and allows fuel to bypass the pump—so the engine continues to run and you can get to your destination, eliminating tow bills. Order the model recommended for your application. Additional features include: * Unique draw-through technology * 3/4 in. in tank pickup tube * 100 micron in-tank filter * In-tank baffle included, eliminating 1/4 tank issue * Quick-disconnect fittings for all fuel lines * 1 in.-14 fuel filter thread allows the use of other common filter brands * Stainless steel filter stud and filter dip tube (corrosion-resistant) * Flow-through design; no shaft seal to fail or leak * Wiring harness with Delphi sealed Weatherpack connectors (vehicle-specific pumps only) * Self-priming, no need to pre-fill the filter during install or filter swap * Available with your choice of gph ratings * OEM-style return; no need to modify the filler neck
Not Yet Reviewed
$2,398.35
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$2,126.95
On Sale
FiTech Go Port EFI complete fuel injection systems are offered in two kits, one for up to 550 hp and one for up to 1,050 hp. Each system is supplied with a new aluminum intake machined and fitted with injectors (36 or 80 lb.), fuel rails, wiring harness, and an 850 cfm throttle body. The ECU, with its high-speed processor, is integral to the throttle body along with the TPS, IAC, IAT and MAP sensors reducing wiring and making installation as easy as possible. All setup is handled through the color touch screen monitor with no tuning experience necessary to have your engine ¬rev up and running at its best. Choose the system designed for your engine.
( 3 )
$2,395.00
—
$2,445.00
$2,035.75
—
$2,078.25
Maximize your diesel truck's performance and pulling power with aFe BladeRunner turbochargers. The turbochargers are optimized for maximum boost response, as well as overall power. The compressor housings are made of premium cast aluminum and feature a ported shroud design that eliminates dangerous compressor surge. Each of these turbochargers feature specifically designed trims that are aimed at maximizing power and throttle response for your given power goal. For maximum boost response and the ultimate torque delivery, aFe BladeRunner turbochargers will help you get there. Order the model that is best suited to your application needs.
Not Yet Reviewed
$2,098.95
—
$3,185.70
Aeromotive 5.0 GPM brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 5.0 GPM in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$2,186.15
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$2,400.95
On Sale
Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits
Not Yet Reviewed
$2,441.92
$2,299.99
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$2,477.99
—
$2,665.99
Nitrous Outlet EFI single nozzle systems come with more jets to set horsepower exactly where you want it. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and a nozzle. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. Get Nitrous Express race-proven systems because of their quality components and extreme performance.
Not Yet Reviewed
$2,322.99
—
$2,364.99
Nitrous Express 5.0L Fox Body EFI nitrous plate systems feature spray bar-less technology for the ultimate in atomization and distribution. The billet plates replace your factory EGR spacer, making installation quick and easy. Each plate includes a 75mm inner diameter as a default; however, you can purchase inserts with smaller inner diameters, if desired. Nitrous Express 5.0L Fox Body EFI nitrous plate systems are available with or without bottles. Systems include: * Extra-long stainless braided N2O and fuel lines * Master arming switch * WOT activation switch * Relay and relay harness * A fuel line adapter is provided to simplify installation--no need to cut your factory fuel lines * Jetting for 35, 50, 75, 100, 125, 150, 200, and 250 whp * All necessary hardware to complete the installation * Systems with bottles include the new billet aluminum Lightning 500 bottle valve and stainless bottle brackets
( 1 )
$2,031.76
Crank up the horsepower in your Mustang with Nitrous Express 5.0 Coyote plate nitrous systems. These systems feature a state-of-the art Phase 3 Spraybarless technology. The billet plate bolts between the throttle body and intake making installation quick and easy and it will not restrict airflow, while providing the ultimate in atomization and distribution, meaning more power for you. They have a clean, complete look by integrating the solenoids with the nitrous plate, while installation is made easy by using the direct plug-in fuel line adapter. Give your Mustang the extra power you desire with Nitrous Express 5.0 Coyote plate nitrous systems.
Not Yet Reviewed
$2,483.06
For drag racing applications, you need a big turbo to make big power, but along with the big power comes a big problem--turbo lag. These Nitrous Express InstaBOOST EFI nitrous systems have the cure for turbo lag woes. They are uniquely configured to come on strong to eliminate that dreaded turbo lag, but then ramp out the nitrous smoothly to let the mighty turbo do its thing. The end result is monster power with zero lag, even with a huge turbo. The Nitrous Express InstaBOOST EFI nitrous systems feature an adjustable 1-8 psi pressure switch to control the nitrous flow--it's sure to have you out of the hole faster than ever.
Not Yet Reviewed
$2,099.95
These Nitrous Express EFI Race dual nozzle nitrous systems are designed for EFI engines looking for an extra shot in the arm. At the heart of these systems are NX's potent "Shark" nozzles, which means that they can deliver power increases from 100 to 300 hp. Best of all, these increases are in graduated increments that you can select. The kits include the nitrous bottle, mounting brackets, two nozzles, nitrous supply hoses and fittings, solenoids, switches, wiring, jets, and mounting hardware.
Not Yet Reviewed
$2,246.45
With a Nitrous Express EFI dual stage nitrous system, you can head off two potential problems. One is the hassle of plumbing a port-style system in an already-crowded engine compartment. The simplicity of these systems neatly takes care of that. The other is the potential for overwhelming your vehicle's traction with too much power. The dual stage nature of these systems gives you a head start on that; plus, you can pick the power increase you get--in 25 hp increments--from 50 all the way up to 300 hp. The kits include the nitrous bottle, dual "Shark" nozzles, solenoids, an extra-long stainless braided nitrous supply line, solenoids, and all mounting hardware.
Not Yet Reviewed
$2,246.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
