Availability
Showing In Stock Items. Show All 15 Items.
Easily add a cone-style filter to the end of your SCT 90mm Big Air MAF meter with one of these SCT Big Air 2900 MAF cone filter adapters. The SCT Big Air 2900 MAF cone filter adapter flange is CNC-machined from aluminum for superior strength, and yet is lightweight. They're designed to fit either a BA-2600 or BA-3000 SCT Big Air 90mm MAF meter.
( 2 )
$59.99
S&B Filters intake boot kits are built to last a lifetime. All boots come with stainless steel hose clamps so you don't have to reuse the old OEM clamps. These kits are available with different components for use on a variety of Ford F-250 and F-350 trucks from the mid-1990s. Here are the contents: * MODEL SBF-83-2012: Comes with (2) stainless steel hose clamps. Direct replacement for the failure-prone orange turbo intake boot found on 1994-96 OBS Powerstroke trucks. Does not fit E Series vans or 1997 trucks equipped with the black turbo intake boot. S&B Intake boot is made with four plies of aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. Replaces Ford turbo inlet 1820102C2. * MODEL SBF-83-2013: Comes with (4) T-bolt clamps and (4) hose clamps. Only use the T-bolt clamps for the lower spider clamp locations if they have been reinforced with Riff Raff Plenum inserts. Use the hose clamps if they have not been reinforced. You will have two clamps left over after the install. The turbo intake hose only replaces the factory orange boot and will not fit E-Series vans or 1997 OBS trucks with the black turbo intake boot. The S&B turbo boot and intake manifold plenum boots made with aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. Replaces Ford turbo inlet 1820102C2 and intake manifold boots F6TZ-6C640-A.
Not Yet Reviewed
$39.00
aFe F-150 vent tubes prevent the dreaded check engine light that is prone to come on after installing an air intake on your Ecoboost F-150. Aftermarket intakes flow better than the factory intake and this can cause and issue with the vacuum signal causing a P04DB check engine light to appear. These nylon vent tubes are designed to pull the ideal amount of vacuum after the installation of your air intake kit, keeping the CEL at bay.
( 3 )
$25.20
These Spectre reducer couplers feature a smaller inlet diameter that adapts to a larger size. They are manufactured from high-quality silicone and are available in black, red, blue, or yellow finishes. The Spectre reducer couplers include two stainless steel worm gear clamps for quick, easy attachment.
( 22 )
$32.99
Dorman offers these air intake hoses to replace your OEM cracked or broken air intake hoses. They are manufactured from quality materials and can be installed easily without any modifications. Available for passenger cars, trucks, or SUVs, the Dorman air intake hoses will get all of the air flowing to your throttle body.
( 22 )
$32.95
—
$42.99
BBK cold air intake replacement hardware and hose kits will freshen up the look of your BBK Performance cold air kit. Each replacement set includes all the silicon couplers and clamps included in the original kit. This is a great way to replace your old, dirty, and dried or cracked hoses on your BBK cold air intake kit.
( 4 )
$44.99
—
$49.99
On Sale
Steeda silicone hose upgrade kits are designed to replace your blue hose factory hoses. Steeda manufactures these hoses from quality materials to ensure performance and durability.
Not Yet Reviewed
$44.95
$42.70
On Sale
Steeda's high-quality billet intake resonator delete plugs are manufactured from quality materials to ensure performance and durability. Not only are they a great way to dress up your engine bay with ether the Steeda or Fusion logo, but their more aggressive intake tone should also be noticed at wide open throttle.
Not Yet Reviewed
$39.95
$31.96
Clearance
K&N 57i Series cold air induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each of these kits is designed to provide power throughout the rpm range. The extra surface area of these open-air air filters provides even more airflow at lower restriction than a K&N OEM replacement filter, which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt, increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high-quality materials such as steel, aluminum, silicon, or reinforced nylon to ensure long life.
( 10 )
$103.99
$29.50
Pacific Performance Engineering knows the huge stresses that drag racing and sled pulling put on your diesel's parts. Their silicone tubing couplers were designed to handle the rigors of long-distance towing, racing, and pulling competitions! They are made to be strong and durable, with five plies of polyester reinforced fibers. A chemical, oil, fuel, UV, and ozone-resistant fluorocarbon lining gives PPE silicone couplers the strength to withstand the exposure to heavy usage and bring reliable, long-lasting performance. Their silicone rubber construction ensures constant boost pressures from -76 degrees F to 437 degrees F. They won't blow out like stock hoses will! In short, Pacific Performance Engineering silicone tubing couplers are a smart choice for your high performance diesel!
( 15 )
$40.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
