Availability
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 57 )
$204.99
—
$257.99
$199.99
—
$242.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$119.95
—
$199.95
$107.95
—
$179.95
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$279.95
$251.95
On Sale
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts. They are designed as direct bolt-in replacement coils for many SOHC Ford V8 modular engines. The housing and installation are the same as the factory coils, but that is where the similarity ends. Inside the MSD coil packs, engineers used better quality materials to assemble the primary and secondary windings. The MSD Ford Blaster Coil-on-Plug ignition coil packs take the spark energy right out of the coil and put it across the plug gap to improve the combustion and output of the engine.
( 364 )
$282.95
$254.65
On Sale
Scott Drake manufactures these premium leaf springs using high-quality steel to ensure a smooth, stable ride for years to come. Scott Drake offers a large selection of performance leaf springs in both 4 1/2 and 5-leaf versions to suit any driver, on or off the track. For performance rear leaf springs that won't break the bank, rely on Scott Drake.
( 61 )
$156.95
$141.25
On Sale
B&M Z-Gate automatic shifters operate just like those high-dollar, gate-type racing shifters, yet cost much less. Made for street and mild competition, the Z-Gate shifters have an NHRA/IHRA-accepted reverse lockout, a neutral safety switch, a backup light switch, and a universal plastic console. Their patented "Z" shaped architecture totally eliminates the possibility of overshifting and missing a gear.
( 42 )
$318.95
$239.95
On Sale
These Mickey Thompson Street Comp tires are ultra-high performance tires designed for street use. They provide incredible traction, crisp handling, and high-speed cornering ability. The tires also feature the outstanding appearance you've come to expect from Mickey Thompson. They use an asymmetrical tread design to offer superior wet and dry performance, while providing crisp and tight steering response. Mickey Thompson Street Comp tires feature smooth, easy-to-clean sidewalls, so you can keep your ride looking good all the time.
( 285 )
$188.99
$170.09
On Sale
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 398 )
$134.95
$121.45
On Sale
Stifflers Suspension transmission crossmembers are engineered to deliver quality, fit, finish, and functionality. At the core of these kits are Stifflers' unique single-tube crossmembers—adding strength and stiffness beyond that of OEM versions, while offering versatility without the excess weight. They also allow more exhaust clearance. To install, simply slide the mounting sleeves and reposition the spacers to cover your application. They work with OEM and aftermarket transmission mounts, and will maintain your current pinion angle. Stifflers Suspension transmission crossmembers include low-deflection polyurethane bushings in the mounts to dampen driveline vibrations and noise, but for racing applications they can be replaced by optional solid bushings. Order the crossmembers designed for fitment on your make and model.
( 75 )
$189.95
—
$299.95
$170.96
—
$269.96
On Sale
Enhance the look of your engine with a pair of Scott Drake classic aluminum valve covers for small block Ford engines. Diecast from high-quality aluminum alloy, the covers are available in more than a dozen styles to customize your ride. Finish options include polished, black, black wrinkle, and black powdercoat. These valve covers also feature a cadmium plated oil filler tube to help stop corrosion, an improved oil baffle design to accommodate high-lift cam shafts—and will work with most roller rockers. Order the model designed for your vehicle application.
( 183 )
$224.95
—
$249.95
$202.45
—
$224.95
On Sale
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 33 )
$142.95
—
$158.95
$128.65
—
$143.05
On Sale
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 366 )
$169.95
—
$184.95
$152.95
—
$166.45
On Sale
Help lift your sagging rear-end with Scott Drake! Scott Drake manufactures these premium leaf springs using high-quality steel to ensure a smooth, stable ride for years to come. They feature OEM-style clamps, correct hot cupped ends, anti-squeak pads, and front eye bushings installed.
( 25 )
$121.95
—
$131.95
$109.75
—
$118.75
On Sale
J&L Oil Separator Co.'s new oil separators are the perfect addition to your high performance machine. They're everything you're missing to filter out oil vapors that could damage your internal engine components over time. The 3 oz. tanks nearly triple their original design in size—and feature a thick billet construction that's available in a clear or stealthy black anodized finish. Their new multi-stage filtration system collects the finest of vapors and drops them into an easily removable bottom. Clean air is then able to pass through, saving components such as your intake tube and manifold runners. J&L Oil Separator Co. oil separators include the fittings you'll need to make installation a breeze. Order the model tailored for your vehicle.
( 370 )
$169.00
—
$179.00
$152.10
—
$161.10
On Sale
Sport shocks and struts from Koni are carefully designed to provide exceptional road-holding and handling properties, combined with an acceptable level of comfort. They offer responsive steering and cornering, improved body control, and limited body movements when braking and accelerating, resulting in a direct feel and excellent wheel-road contact.
( 81 )
$186.85
—
$257.83
$175.64
—
$219.21
On Sale
Cast from high-quality molds for proper fit, these Scott Drake exhaust manifolds will get that engine restoration on the right track to a throaty roar. Whether you are replacing a stock corroded manifold or getting to that exhaust portion of a rebuild, these manifolds will get that engine back to its deep throaty growl that you love.
( 37 )
$291.95
$262.75
On Sale
Scott Drake sway bars are available for a wide range of applications. They improve your ride's handling by reducing body roll and minimizing body lean during hard cornering. These sway bars are made from top-quality materials and are available in front and rear versions.
( 84 )
$181.95
—
$209.95
$163.75
—
$188.95
On Sale
The shocks that started it all! Koni Special D shocks feature an adjustable, monotube, high-pressure gas design that improves ride and handling performance. They're an affordable, perfect choice for OE replacement or suspension improvement. Special D shocks are available for a wide range of applications, from the 1950s and up.
( 30 )
$153.54
—
$230.31
$144.33
—
$184.25
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
—
$326.95
$103.45
—
$269.95
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 991 )
$201.95
—
$449.95
$181.75
—
$259.15
On Sale
Plastic OE filters are prone to cracking and fuel leakage. You can eliminate the risk of a cracked filter with Fleece Performance engine-mount fuel filter assemblies that include billet aluminum cap and quick-disconnect fittings. These drop-in replacements lock directly into the stock filter location and utilize a replaceable spin-on Donaldson filter that is easily serviceable. Each kit includes an extra Donaldson fuel filter, further extending the time before you need to purchase an additional filter. Features: * Drop-in replacement for the factory underhood filter * Heavy-duty anodized billet aluminum cap * Heavy-duty anodized billet aluminum quick-disconnect fittings * Steel adapter fitting for the filter * Extra Donaldson filter included
( 1 )
$199.00
$169.15
On Sale
Professional Products PowerForce harmonic dampers are extremely durable—and economically priced. They're built with a bonding process which adheres the elastomer to the I.D. of the inertia ring and the O.D. of the hub, utilizing a strong adhesive along with an improved elastomer to create a much stronger bond. PowerForce dampers also feature white, easy-to-read timing marks against a painted black background. Each unit is accurately balanced and closely machined for the correct fit. Dozens of models are available for applications from 1955 and up. Choose the size, material, finish, keyways, and other options recommended for your vehicle.
( 332 )
$121.99
$109.79
On Sale
Stifflers Suspension weld-on subframe connectors are engineered to be stiff, lightweight, and easy to install. These full-length connectors are manufactured from 1.5 in. x 2 in. x .083 in. rectangular tubing. They are optimized using CAD/CAE software to provide the ultimate in stiffness, reduced weight, and maximized surface area between the subframe and connector. Stifflers subframe connectors feature crimped and welded tube ends to seal out moisture, while also increasing strength, and a laser-cut cross brace that reduces free span, reinforces the floor pan, and minimizes required welding during installation. All is given an industrial-grade powdercoat for long life. Welding areas are pre-masked, so no removal of powdercoat is needed before installation--a real time-saver!
( 10 )
$189.95
$170.96
On Sale
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 274 )
$279.99
$251.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
