Availability
Showing In Stock Items. Show All 204 Items.
Eliminate the hassle of fabricating a crossmember and position your engine where you want with these universal crossmember motor mounts from Trans-Dapt. They'll support most small and big block engines and feature different frame rail widths for different engine applications. The crossmember motor mounts are available with or without the motor mount pads.
( 32 )
$108.99
—
$159.99
Competition Engineering bump steer kits are designed for vehicles that have been raised or lowered and have unwanted toe changes and bump steer during suspension travel. These fully adjustable kits replace non-adjustable stock components with precision, aircraft-quality components that bolt into place with common hand tools. Made from a strong billet aluminum these kits are built to perform.
Not Yet Reviewed
$170.99
When swapping out the engine in your hot rod, you need motor mounts and inserts that you can count on. Trans-Dapt has done all of the work for you in making these engine swap motor mounts. The units are available for a variety of mounting styles, and they're made with quality materials, such as rubber, steel, and polyurethane. These motor mounts are designed for specific vehicle and/or engine applications, so you can be assured of a perfect fit and great performance.
( 351 )
$113.99
—
$175.99
Summit Racing offers engine swap motor mounts for a variety of applications, from the 1980s and up. The complete mounts include steel brackets with a black powdercoat finish and bolt-in hardware required for installation. Secure your engine properly; order the set of mounts recommended for your project.
( 7 )
$102.99
—
$219.99
QA1 interchangeable engine mounts allow you to use the engine of your choice. They are designed to be used with specific QA1 offerings, like their F-100 front coilover conversion systems and Mustang K-members. All brackets are made from strong steel and given a durable black finish.
( 6 )
$113.95
Capture your 5.0L Coyote with Ford Performance Parts 5.0L Coyote engine mount kits. Perfect for engine swaps, these kits include strong cast aluminum engine brackets, engine mounts, and hardware for a complete install. The best way to secure a Coyote is with Ford engine mount kits.
( 3 )
$174.99
Soft factory motor mounts can do a good job of not transmitting engine vibration, but they also create unresponsiveness in the vehicle's drivetrain. Nolathane engine mounts and inserts work in conjunction with the OE rubber bushings, giving your car better throttle response, as well as crisp and defined gear shifts. These upgrade mounts and inserts eliminate engine rotation under hard acceleration. Order the kit recommended for your vehicle and engine application.
( 12 )
$179.87
—
$239.87
Competition Engineering mid-mount plates are designed to work with the aluminum front motor plates to further eliminate engine twist and prevent broken transmission cases in high-torque installations. Made from .188 in. thick 6061-T6 aluminum or .090 in. thick mild steel, they allow easy transmission swaps and help align the drivetrain for trouble-free operation. They include universal frame mounts and hardware.
( 24 )
$124.99
—
$207.99
Competition Engineering has developed these engine-limiting torque link kits for enthusiasts who want the benefits of a solid motor mount for racing, and the comfortable ride of a stock motor for street use. It all begins with the installation of two supplied zinc-plated brackets. One goes on the front of the driver side cylinder head, and the other on the sway bar mount on the frame. For racing use, the removable torque link can be installed with the supplied pins and clips, limiting engine movement. When the racing is over, simply remove the torque link, and you're ready for a smooth ride home. These kits include all hardware and instructions for a complete installation.
( 8 )
$103.99
Reduce vibration and extend the life of your engine's components and accessories with Advance Adapters top-quality, proven-design motor mounts. For some of the bases that require welding, a temporary bolt-on solution allows you to drive your vehicle to the welding shop of your choice. Select the Advance Adapters engine swap motor mounts designed for your vehicle application.
( 125 )
$116.81
Factory engine mounts were designed as soft, flexible mounts to provide a comfortable drive. The tradeoff is the relatively large amount of engine movement that they allow under torque load and on hard acceleration. Engine movement decreases stability under high performance driving conditions and during rapid gear selection. To reduce this movement, Summit Racing™ billet engine mounts are machined from lightweight, aircraft-grade billet aluminum. These mounts are powdercoated black for corrosion resistance. Summit Racing™ billet engine mounts let you enjoy greater stability when accelerating and braking hard and enhanced gear changes under hard acceleration.
Not Yet Reviewed
$141.99
Keep your engine from twisting in the chassis! Competition Engineering front motor plates provide a solid connection between your engine and chassis, eliminating movement and helping to improve reaction times. These motor plates are made from 1/4 in. thick 6061-T6 aluminum and are computer-designed and machined. They're perfect for engine swaps or for setting the motor back in the chassis for increased weight transfer.
( 30 )
$210.99
—
$241.99
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering's weld-on subframe connectors give you that. Constructed of mild steel tubing, they solidly connect your car's front and rear subframes.
( 14 )
$177.99
—
$180.99
Summit Racing™ Engine Travel Limiters provide you an affordable complete kit to keep that engine where you mounted it. When using motor plates, the engine may try to move forwards or backwards in the chassis under hard acceleration or braking which could create binding and other problems. These travel limiters bolt to a plate on the engine block and give you a diagonal link to the frame rail that positively locates the engine to keep it from flexing the motor plates. These comes unassembled and include all necessary tabs and hardware. Welding and fabrication skills are required.
( 1 )
$107.99
Chassis Engineering motor mount kits are easy to install. Kits are offered in different groupings to use with your vehicle's original, Chassis Engineering, or other IFS system for strength and support. Motor mount kits may feature: * Bolt-on or weld-on frame adapters * Chassis Engineering engine mounts or side engine mounts * Thru-bolt cushion set * Hardware * Instructions
( 6 )
$199.00
Steeda Ford Mustang heavy-duty adjustable motor mounts eliminate the hydra-coupling and do a better job of directing your engine's efforts to the wheels, as well as maintaining proper engine-to-driveline geometry. They're supplied with two sets of bushings with different durometer ratings. Choose the soft red bushings for great control with only minimal increase in engine vibration—or choose the hard black bushings for maximum control. These mounts also are height adjustable in 1/4 in. increments, anywhere from stock to 3/4 in. Order the Steeda heavy-duty adjustable motor mounts designed for your vehicle application.
( 6 )
$229.95
—
$248.99
Clearance
Anchor Industries engine mounts deliver precise performance and maximum durability. Manufactured from superior-quality materials and utilizing computer-engineered processes, Anchor Industries engine mounts offer the OEM quality you want, the fit you need, and the performance you expect—all at competitive pricing. Hardened steel fasteners, both natural and styrene butadiene rubbers, and a special Chemlock bonding agent provide maximum strength and service life—to support your engine and dampen vibration and noise, protecting the rest of your ride. Whether you're driving a domestic or foreign vehicle, Anchor Industries carries a huge inventory to meet your application needs. There is a sea of choices when purchasing OE replacements; Anchor Industries engine mounts will hold your engine firmly in place.
( 656 )
$111.99
Add much-needed strength to your vehicle's original frame with Chassis Engineering frame boxing plates. These reinforcement plates are designed to beef up critical front and rear suspension attachment points and motor mount placements—particularly on car and truck models from the '30s and '40s. Made of 3/16 in. steel, you can fit and weld the braces into place wherever your application requires.
Not Yet Reviewed
$104.00
Chassis Engineering offers Complete Rear Axle Mounting Kits for a variety of rear-end choices. Your vintage hot rod, classic car, or pickup can have renewed suspension performance with one of these bolt-on kits. Choose from model-specific and universal options—or from kits with just front and rear spring mounts or hangers and hardware. The mounting kits are available in several configurations with or without springs or shocks. Bring modern suspension to your vintage ride with a Chassis Engineering Complete Rear Axle Mounting Kit.
( 12 )
$212.00
Competition Engineering rear control arm spherical bearing-bushing kits are constructed from billet aluminum, with a steel spherical bearing-type insert for the rear upper control arm. These kits eliminate flex and binding, improve handling, and provide positive location of the rear axle housing.
( 1 )
$237.99
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 69 )
$249.95
$137.95
—
$244.95
Bob Drake front engine supports are perfect copies of the original-style front engine supports for your 1932 Ford V8 engine and are sure to impress even the pickiest Early V8 enthusiast. These front engine supports are not cast, but drop forged for added strength. With a minor modification they can be used by Hot Rodders to mount small block Chevys in early Ford model cars.
Not Yet Reviewed
$161.99
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 242 )
$120.99
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 161 )
$268.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
