Availability
Summit Racing™ offers direct-fit reproduction windshield wiper blades and related accessories for a wide range of vehicles—including many Chevrolet, GMC, Ford, Pontiac, Buick, and Oldsmobile cars, trucks, and vans from the 1940s and up. These rubber replacements blades and silver frames are available in a variety of lengths. They're manufactured in accordance with factory specs to ensure proper fit and long-lasting performance. Order the blades recommended for your application.
( 12 )
$14.99
—
$17.99
Keep your flexplate firmly in place with professional-grade steel flexplate bolts from Summit Racing™. These quality hardware replacements feature a hex head design and are offered in many finishes, lengths, and thread sizes. Order the fasteners recommended for your vehicle and engine application.
( 33 )
$12.99
Summit Racing™ oil pump primers make it easy to get oil to the top of your engine. They're designed to fit in your distributor hole and require no modifications to use. The Chevy primers feature a billet aluminum adjustable collar and black oxide coated steel shaft; while the Ford and Mopar primers use a standard steel shaft with no collar. Order the model recommended for your year/make and engine application.
( 178 )
$13.99
Summit Racing™ flywheel bolt kits are heat-treated to Grade 8 specifications, and have a reduced-profile hex head for clearance. Their black oxide finish resists rust and corrosion, and the kits include lock washers.
( 20 )
$10.99
Our Summit Racing™ brass freeze plugs were designed for marine use, but you landlocked guys will get a lot of use out of them, too. All of the necessary plugs are included.
( 102 )
$12.99
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 117 )
$19.99
Our classy Summit Racing™ engine oil dipsticks and tubes will dress up any engine compartment, including yours. They are made from quality steel, with durable Chrome or Black Powdercoated finish for good corrosion protection and long life. Get yours today.
( 186 )
$15.99
These Summit Racing™ fuel pump block-off plates will seal your engine after you replace your mechanical fuel pump with an electric one. Made from billet aluminum and featuring a polished finish, they'll add some shine to your engine, too!
( 128 )
$13.99
—
$16.99
Replace your grungy hardware. Dress up your engine and keep it looking good with Summit Racing™ classy stainless steel intake manifold bolts. They're made from rugged Grade 8 stainless, which means that not only are they strong and durable, they're also corrosion-resistant. They're hex-head bolts for easy installation, and they fit most popular manifolds.
( 141 )
$11.99
Don't ignore the signs! A clunking and clanging noise, intense vibrations at accelerated speeds ... it could be an indication of a failing U-joint. If that's the diagnosis, here is the solution--replace it with one of our Summit Racing Equipment® U-joints. These drivetrain components are engineered from quality materials to meet or exceed OE standards, and are available in applications with forged and case-hardened alloy steel crosses for lasting service life. The bearing cups are case-hardened for strength and durability, and superior seals help keep contaminants out and allow for proper lubrication. Plus, a grease fitting in the cross body allows for easy maintenance. Select your part application and install it to avoid complete U-joint failure--problem solved!
( 32 )
$14.99
—
$19.99
Summit Racing™ zinc alloy fuel pump block-off plates will seal your engine after you replace your mechanical fuel pump with an electric one. Made from one of the toughest materials around—zinc alloy, the plates have a 3-line design and are available in several finishes, so they're not only functional but also stylish. Select the Summit Racing™ zinc alloy fuel pump block-off plate designed for your vehicle.
( 17 )
$11.99
Summit Racing™ offers direct-fit reproduction windshield wiper arms and related accessories for a wide range of vehicles. These replacement arms are machined from stainless steel with a black or polished finish. They're manufactured in accordance with factory specs to ensure proper fit and long-lasting performance. Order the components recommended for your application.
( 6 )
$14.99
—
$19.99
Ensure proper alignment with Summit Racing™ bellhousing dowel pins. Our pins are a must for easier alignment when installing the bellhousing on your engine block. They contribute to fewer shifter problems and maximum life for your bearings and transmission. The dowel pins are available in a variety of sizes and offsets. Order the pair recommended for your vehicle application.
( 90 )
$18.99
After extreme heat, the next fastest transmission killer is foreign debris. Our Summit Racing™ filter kits come with a fresh filter and pan gasket so that you can protect your transmission against those damaging impurities.
( 69 )
$14.99
—
$19.99
Cork has been a reliable gasket material for longer than most of us have been alive. It's strong and reliable, and it gets the job done just fine in stock and mild performance rebuilds. So it should be no surprise that we've chosen it for our stock-replacement Summit Racing™ valve cover gaskets. If you're doing a rebuild, or if you've got to replace your valve cover gaskets, chances are they're just what you need.
( 14 )
$13.99
Keep your performance engine sealed properly with Summit Racing™ oil pan gaskets. Built from high-quality materials, these gaskets will maintain a leak-free seal for your oil pan.
( 116 )
$19.99
Our Summit Racing™ valve cover hold-down tabs are designed to spread the fastener load over a larger area of your valve cover flange. This minimizes distortion and decreases the possibility of oil leaks.
( 41 )
$10.99
Summit Racing™ offers direct-fit locking gas caps for a wide range of applications—including hundreds of Chevy and GMC trucks from 1938 thru 1971. These high-quality vented replacements feature a chrome plated finish, integrated lock, and two keys. Some models include a GM or Bowtie embossed logo. Order the cap designed to fit your fuel tank.
( 5 )
$16.99
Summit Racing™ clutch pressure plate bolt kits are used to attach clutch pressure plates to flywheels. They're made from high-strength alloy steel with a protective black finish--and offer an OE-fit and function. When replacing your clutch, why take a chance with old fasteners when you can use new high-strength bolts from Summit™. They're available to fit a wide variety of year, make, and engine applications.
( 3 )
$12.99
—
$14.99
Summit Racing™ transmission kickdown spring perches are handy parts used to hook up your new carburetor to your Ford OEM transmission kickdown lever. They are manufactured from durable steel and install easily with no modifications.
( 17 )
$17.99
These Summit Racing™ replacement thrust bearings will keep your camshaft operation running smoothly. They are available for all Summit Racing™ timing chain and gear sets, so you know that we will have your engine covered.
( 2 )
$17.99
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 60 )
$18.99
—
$19.99
Summit Racing™ offers a wide selection of restoration body decals for the hood, trunk, scoop, visor, windshield, or any other place you want to display them. These machined-stamped, high-quality replica decals are available in different materials, sizes, colors—and more than 50 different OEM logo styles. They attach easily with adhesive backing and will add unique finishing touches to your classic vehicle.
( 16 )
$10.99
—
$18.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 76 )
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
