Availability
Ford Performance Parts 2018 2.3L 310 hp EcoBoost long block crate engines are designed for traditional rear drive installations. They're the same EcoBoost engine found in the 2018 Mustang and feature turbocharging, direct injection, and twin independent variable cam timing (Ti-VCT). The swap possibilities are almost endless: from early street rods, kit cars, most generations of Mustang, to just about any other vehicle build. Ford Performance Parts 2.3L 310 hp Mustang EcoBoost engine kit—this kind of performance comes standard with a dose of adrenaline! Features and items: * 310 hp and 350 lbs.-ft. torque at 3,000 rpm (with 93 octane fuel) * Production turbocharger * Starter and mounting hardware * Alternator and mounting hardware * Flywheel * Engine harness (not installed, must be used with Ford Performance control pack) * Throttle body (not installed, must be used with Ford Performance control pack) * Engine kit uses Ford Performance Parts M-6017-23T control pack (not included) for easy plug-and-play installation
( 1 )
$5,242.99
Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds
Not Yet Reviewed
$15,262.99
RideTech 1967-70 Mustang coilover suspension systems allows you to give your vintage Pony modern drivability. The benefits of buying these complete kits is that RideTech has done all the homework for you. They have matched the perfect spring rate and components for your Mustang's best performance and ride quality. All you do is install. Completely upgrade your existing suspension with RideTech coilover suspension systems. Features include: * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint has been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower StrongArms feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is located at the top of the shock for underhood access. * Front MuscleBar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. * Bolt-on 4-link greatly improves traction, handling, and ride quality
Not Yet Reviewed
$6,230.00
Start with the right foundation for your Blue Oval build--start with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Build a powerful 8.2 in. deck engine for your vintage muscle, street rod, Fox body, or late model Mustang by starting with the same short block used in the 500 hp Z363 crate engines. These Ford Performance Parts Boss short block assemblies take the bore out to 4.125 in. for 363 stroked cubes of power. Plus, strength from within is provided by the forged crankshaft and I-beam connecting rods. Power your next project with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Additional technical specifications: * Engine type: 302 based small block Ford * Bore x stroke: 4.125 in. bore x 3.400 in. stroke * Block: Boss 4-bolt main block M-6010-BOSS302 * Piston to Deck Height: .01 in." below deck (nominal) * Crankshaft: SCAT forged steel * Connecting rods: SCAT forged steel I-beam connecting rods with floating pins and ARP bolts * Pistons: Mahle forged aluminum, 1.5mm, 1.5mm, 3.00mm rings, valve reliefs for X306, X307, Z304DA, Z304P, N351, and other inline valve Windsor cylinder heads * Pistons designed for 20 degree valve angle heads and will fit stock or most spread valve guide centerlines; 6cc valve pockets, check piston to valve clearance * Compatible with most aftermarket performance cylinder heads * Designed for M-6049-X306//X307/Z304DA/Z304P and N351 cylinder heads. Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Hydraulic roller camshaft compatible * Recommended cylinder head fasteners M-6065-BOSS head bolts or M-6014-BOSS studs depending on application * Requires head gaskets M-6051-R351 * Internally balanced; requires "0" balance flywheel and damper * High performance harmonic balancer M-6316-D302 recommended * High-volume oil pump M-6600-D2 recommended * 302 bolt pattern oil pan and timing cover * Built with all new parts * Photo and specifications may vary
( 1 )
$6,005.99
Drop a Ford legend reborn into your project and experience the power of Ford Performance Parts 427 c.i.d. 535 hp long block crate engines. Built on Ford's Boss 351 blocks, these American-made engines are designed to provide you with big performance in a small block package, along with great drivability. The iconic 427 c.i.d. displacement, but on a Windsor platform—they offer all the powerplant you want at a price that you'll love! Technical information: * 535 hp at 5,600 rpm * 545 lbs.-ft. of torque at 4,500 rpm * Engine type: 351 based small block Ford * 4.125 in. bore x 4.00 in. stroke * 9.5 in. deck height Boss 351 block * SCAT forged steel crankshaft * SCAT forged steel H-beam connecting rods with ARP bolts * Mahle forged pistons with floating wrist pins * Hydraulic roller camshaft * Camshaft lift: .594 in. intake/.618 in. exhaust * Camshaft duration at .050 in: 242 degrees intake/248 degrees exhaust * Ford Performance aluminum "Z2" cylinder heads * 2.02 in. intake/1.60 in. exhaust valves * PAC 1219X ovate beehive valve springs * 10.5:1 compression ratio (nominal) * Roller rocker arms; 1.65:1 ratio * Ford Performance SFI-approved vibration damper; may require a spacer for pulley alignment * Cast aluminum, black wrinkle finish, Ford Racing script valve covers; fit most non-EFI applications * Steel oil pan with windage tray and scraper; 9-qt. capacity * Premium unleaded fuel recommended * Ignition timing: 32 degrees at 4,000 rpm * 5,600 maximum recommended rpm * Internally balanced; use neutral balance flywheel (not included) * Edelbrock Super Victor intake manifold recommended (not included) * Intake gaskets and pilot bearing included * Standard rotation water pump included * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed, allows use of mechanical fuel pump * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor not included * MSD distributor recommended (modifications for intake clearance necessary) * Steel distributor gear required * Built with currently available parts * Photo and specifications may vary * Available in front or rear sump configurations
( 2 )
$12,159.09
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Top performance is the desired goal of many automotive upgrades—precisely what QA1 Level 3 handling suspension kits deliver. Compared with the Level 1 and 2 packages, these heavy-duty assemblies offer additional control components, as well as stiffer springs to maximize your cornering ability and handling. QA1 Level 3 kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you want. Select the kit designed for your vehicle.
Not Yet Reviewed
$6,660.95
Detroit Speed offers Fox Body short long arm conversion systems for a variety of applications, including many Ford Mustang and Mercury Capri models from the 1970s, '80s, and '90s. These suspension kits redefine Fox Body handling with a no-compromise double wishbone design. They system replace the outdated factory suspension with modern geometry, increased strength, and race-proven adjustability—delivering premium fit, finish, and performance. * SUPERIOR SUSPENSION GEOMETRY and STABILITY: Detroit Speed's exclusive frame rail insert optimizes camber gain and roll center height, significantly improving front-end stability. The tubular upper and lower control arms reduce deflection, providing precise suspension movement and sharper handling response. * FORGED UPRIGHTS & EXPANDED BRAKE OPTIONS: Lightweight forged aluminum uprights feature modern hub-pack bearings for durability and reduced maintenance. This setup provides access to high-performance braking solutions for superior stopping power. * MAXIMIZED TIRE CLEARANCE: Designed for serious performance applications, these systems allow clearance for 275/35R18 tires on a 10 in. rim while maintaining full steering lock. Whether on the street or track, this setup ensures maximum grip without compromise. * FACTORY COMPATIBILITY, PERFORMANCE UPGRADE: These systems are optimized for factory 1987-93 V8 K-members and aftermarket K-members, ensuring seamless integration into high-performance builds. Some fabrication is required, but the result is a modernized, precision-tuned suspension that outperforms factory limitations. Available versions: * Single-Adjustable Coilover Control (032096-SDS): Detroit Speed/JRi aluminum coilovers offer Detroit Tuned valving for precision damping control with a single adjustment to fine-tune rebound. Combined with a 1 7/16 in. diameter adjustable-rate sway bar, this system delivers unmatched street and track performance. * Double-Adjustable Coilover Control (032096-DDS): Detroit Speed/JRi double-adjustable aluminum coilovers feature Detroit Tuned valving, allowing independent tuning of high and low speed rebound for maximum control. Paired with a 1 7/16 in. adjustable-rate sway bar, this system delivers fully customizable handling for both street and track applications. * Non-Adjustable High Performance Coilover Control (032096DS): Detroit Speed/JRi non-adjustable aluminum coilovers feature Detroit Tuned valving, delivering precision damping. Paired with a 1 7/16 in. diameter sway bar, this system provides optimized handling and stability for both street and track applications. FEATURES AND BENEFITS: • Optimized camber gain and roll center height for better handling stability • Tubular upper and lower control arms improve suspension geometry and reduce deflection • Forged aluminum uprights with modern hub-pack bearings for durability and reduced maintenance • Adjustable 1 7/16 in. diameter sway bar for improved front-end response • Clearance for up to 275/35R18 tires while maintaining full steering lock • Detroit Speed/JRi aluminum coilover shocks for precision damping (options): -- Single-adjustable -- Double-adjustable -- Non-adjustable
Not Yet Reviewed
$5,459.95
—
$6,820.95
Kooks Headers COMP systems include heavy-duty, crack-resistant headers. They are complete exhaust systems that feature large diameter stainless steel construction with smooth-flowing mandrel-bent tubing. These systems typically include X-pipes, over axle pipes, mufflers, polished or black exhaust tips (some may utilize factory tips), and installation hardware. Kooks Headers COMP systems are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * Tuner-catted with high-flow catalytic converters with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, they eliminate 90 percent of "Check Engine Light" warnings Note: Kooks Headers COMP systems may not be legal for sale, installation, or use in some locales. Check your state and local laws.
( 1 )
$8,802.41
—
$9,432.41
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$5,249.99
—
$9,245.99
Summit Bucks
Edelbrock E-Force Mustang Stage 1 Street Legal supercharger kits transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. These Mustang supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 2 )
$7,296.95
—
$9,396.95
Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
( 1 )
$11,701.99
The Ridetech complete coilover suspension system for the 1964-66 Ford Mustang includes everything you need to give your vintage muscle car modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, front MuscleBar, a bolt-In 4=link system, and four HQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all the guesswork when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality—designed to lower your vehicle. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross-shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower StrongArms feature a unique design that combines the control arm and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering. It also includes steering arms, center link adapter, tie rods and adjusters to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires. Includes heavy-duty frame rail brace. This spindle is designed for use with 1967-69 Camaro brake systems. Compatible with OEM manual steering AND with the Borgeson power steering conversion box. * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. The shocks come standard with a 1,000,0001 Mile Warranty. Interested in Autocross or Road Course racing? Consider the TQ Series coilovers. * Front MucleBar sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low-friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is at home on the street as it is on the race track! * Weld-on lower axle brackets are available if using an aftermarket axle housing without stock-style leaf spring pads. (Part number 70010122, sold separately.)
Not Yet Reviewed
$7,670.00
—
$7,990.00
Ford Performance Parts 460 c.i.d. 575 hp small block Ford long block crate engines put down big-time horsepower and torque from the biggest small block Windsor engine ever. They start off with a Ford Performance Parts Boss 351 block with a 9.500 in. deck height that features a forged steel crankshaft with forged steel H-beam connecting rods attached to forged pistons with floating wrist pins. At the heart of the engines are high port/high-flow Ford Performance Z-heads. Other features include: * 575 hp at 5,500 rpm * 575 lbs.-ft. of torque at 4,700 rpm * Engine type: 351 based small block Ford * 4.150 in. bore x 4.250 in. stroke * Boss 351 9.5 in deck, cast iron block * SCAT forged steel crankshaft * SCAT forged steel H-beam 6.125-inch length connecting rods * Mahle forged pistons with floating wrist pins * Hydraulic roller camshaft * .594 in. intake/.618 in. exhaust lift * 242 degrees intake/248 degrees exhaust duration at .050 in. lift * Ford Performance M-6049-Z304DA aluminum "Z" cylinder heads * 2.02 in. intake/1.60 in. exhaust valves * 10.0:1 compression ratio (nominal) * Ford Performance M-6564-F351 roller rocker arms * 1.65:1 rocker arm ratio * Exhaust port raised 5/8 in.; may require custom headers * Ford Performance M-6316-D302 SFI-approved vibration damper; may require spacer for pulley alignment * Cast aluminum, non-EFI valve covers with silver painted finish * Steel oil pan with deep front (9-qt.) or rear sump (7-qt.) pan with louvered windage tray and crankshaft scraper * Ford Performance M-8501-G351 long type, standard rotation water pump * Ford Performance M-9439-A50 intake manifold gaskets included * Distributor not included; steel distributor gear required * Premium unleaded fuel required * Recommended ignition timing: 32 degrees at 4,000 rpm * Maximum recommended rpm: 5,600 rpm * Internally balanced; use neutral balance flywheel (not included) * Edelbrock Super Victor intake manifold recommended (not included) * Engine power ratings achieved with Edelbrock Super Victor intake, Holley 850 cfm carburetor, and long tube headers * Standard rotation timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed, allows use of mechanical fuel pump * Pilot bearing included * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * 570 lbs. approximate shipping weight * Built with currently available parts * Photo and specifications may vary
( 3 )
$12,860.57
Unlock exhilarating performance from your 2022 Mustang with 750 horsepower and 670 lbs.-ft. of torque provided by the Roush 5.0L Mustang Phase 2 Supercharger kits! Building off the 5.0L V8 engine, the Roush Supercharger adds an impressive 300 hp and 260 lbs.-ft. of torque over the stock engine. Included in these Roush Supercharger kits is their high-capacity cooling technology with a full-face low temperature radiator. The larger low temperature radiator provides increased cooling capability, allows for greater power output, and delivers maximum performance. Compatible with both automatic and manual transmission vehicles, these Roush Supercharger kits feature Eaton's coveted TVS R2650 technology for increased power output throughout the rpm band and are engineered for durability with large bearing and timing gears. The 2022 Mustang Supercharger kit by Roush had to meet new Tier 3 Emissions Standards required on the base Mustang for this model year. Roush achieved this by incorporating a hydrocarbon trap in the air induction system as well as a unique calibration for the 2022 model year. Thanks to massive engineering efforts, they were able to maintain previous model year performance targets for power and torque. Because Roush is with you on this ride, their Supercharger kit includes the Roush's 3-year/36,000-mile Limited Powertrain Warranty when installed by an ASE certified technician. The Supercharger kit's calibration is optimized for 93-octane fuel but is also compatible with premium fuel. Product features and highlights: * Fits 2022 Mustang GT 5.0L V8 * Produces 750 horsepower and 670 lbs.-ft. of torque! * High-Capacity Cooling Technology with a full-face low temperature radiator * Compatible with both automatic and manual transmissions * Features Eaton's TVS R2650 technology for increased power output throughout the rpm band * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * Includes all necessary installation hardware Note: Not compatible with Ford Mustang 5.0L equipped to meet Euro 6.2 emission standards. (Euro 6.2 dictates the use of particulate filters which are not compatible with the ROUSH Supercharger system). Not compatible with Mach 1, Bullitt, or GT350.
Not Yet Reviewed
$8,799.99
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.
( 10 )
$5,313.95
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 3 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 3 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * Carburetion * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor, plug wires, and plugs * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 1 )
$5,359.99
Ford Performance Parts Aluminator 5.2 XS long block crate engines are the most powerful, naturally aspirated, modular engines ever built by Ford. Utilizing the technology and hardware originally developed for the Shelby GT350 Mustang, the Aluminator 5.2 XS engines have a rating of 580 hp—making them worthy successors of their previous rendition, the A50XS. They're hand-assembled with premium aftermarket components, along with unique components developed specifically for the Cobra Jet racing program. Ford Performance Parts has created a balanced combination of high-end horsepower and strong mid-range torque in the ultimate cross-plane crankshaft long blocks: the Aluminator 5.2 XS engines. Summary of Aluminator XS features and specs include: * Designed to work with 2015-17 Mustang GT electronics—custom calibration required * 580 hp * 445 lbs.-ft. torque * 5.2L 317 cu. in. * 12:1 compression ratio * Hard-anodized forged pistons with low-friction coating * Unique H-beam connecting rods with bolts * Unique Ford Performance forged steel cross-plane crankshaft * Ford Performance Shelby GT350 cylinder block * Ford Performance Shelby GT350 oil pan, featuring integrated windage and slosh baffles, as well as an integrated oil pickup * Ford Performance Cobra Jet tuned intake (will not clear production 2015-17 hood without modification) * Ford Performance dual 65mm bore throttle body * Four-valve-per-cylinder Shelby GT350 fully CNC-ported aluminum heads with roller-finger camshaft followers * Unique Ford Performance camshafts * Camshaft specifications: Intake—14mm lift/270 degrees duration, exhaust—14mm lift/270 degrees duration * Low-leak rate Variable Cam Timing (VCT) phasers * Robust primary timing chains, as used on Shelby GT350R * Ford Performance 47 lb. fuel injectors * Ford Performance M-12A227-CJ13 high-rpm pulse ring * Unique Ford Performance blue coil covers with added unique badging—only on the Aluminator 5.2XS * Ford Performance zero (0) heat-range spark plugs * Ford Performance oil filter * 200 amp alternator and Front Engine Accessory Drive (FEAD) kit, as used on the Cobra Jet race car
Not Yet Reviewed
$24,500.00
Summit Bucks
Edelbrock E-Force TVS2650 Mustang Stage 2 track system supercharger kits will transform your late model muscle car into a force to be reckoned with! The kits utilize Eaton's TVS2650 supercharger rotors. The high twist, 4-lobe rotor design is 15 percent larger than the TVS2300 and features several improvements to maximize efficiency and performance at upper RPMs, including: * 170 degree twist (versus 160) * Better sealing with optimized "length to diameter" ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power Models are available for Coyote or stock cylinder head configuration; with or without damper these features: computer chip/programmer; damper; fuel pump; and belt tensioner. Order the kit with options preferred for your application.
Not Yet Reviewed
$11,759.95
—
$12,305.95
Detroit Speed Aluma-Frame front suspension packages feature an all-aluminum subframe using Detroit Speed's unique suspension geometry with 6 in. of suspension travel for the ultimate in ride and performance. Order the model recommended for your vehicle. Product features: * Unique cast aluminum cradle and mounting components, resulting in a high strength-to-weight ratio * Tubular upper and lower control arms * Detroit-tuned rack and pinion steering * DSE/JRi aluminum coilover shocks with Detroit-tuned valving available in fixed valve, single-adjustable, double-adjustable, or remote canister double-adjustable versions * Splined integrated-style anti-roll bar * Detroit Speed's Speed-LIGN (patent pending) caster/camber adjusters allow a wide range of adjustments to be made precisely and quickly without any additional shims * Utilizes aluminum uprights and hub packs * Retains stock frame rails and inner fenders, and only requires a small amount of fabrication for installation * Engine mount kits available for Ford small block Windsor engines, Ford FE big block engines, Ford 4.6L, 5.4L, and Coyote 5.0L modular engines, including the Boss 302, as well as GM LS engines * Spanner Tool for easy shock adjustments * Forged Detroit Speed spindle * Composite anti-roll bar bushings
Not Yet Reviewed
$8,948.95
—
$10,504.95
Roush 2018-21 5.0L Mustang Phase 2 supercharger kits delivers thrilling power, unparalleled performance, and versatility across both manual and automatic transmissions. They build on the enhanced performance of the Phase 1 supercharger system and boosts the stock 5.0L V8 Ford Mustang GT to an astounding 750 hp and 670 lb.-ft. of torque--a gain of 290 hp over the stock engine. The high-capacity, low-temperature radiator provides increased cooling capability and works with Eaton's TVS R2650 technology for greater power output. The larger LTR and upgraded calibration work in harmony to improve cooling and optimize performance, giving drivers extra laps at the track. Additional features: * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * 3-year/36,000 mile limited Roush powertrain warranty included * Includes all necessary installation hardware
Not Yet Reviewed
$8,399.99
Summit Bucks
Edelbrock E-Force TVS2650 Mustang Stage 3 Pro-Tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2650 TVS supercharger rotating assembly—a seamless design with minimal elements to eliminate problems and increase airflow. Start your custom-built racer on a winning foundation with an Edelbrock E-Force TVS2650 Mustang Stage 3 Pro-Tuner supercharger kit. Order the model with options you prefer. (These systems are for competition racing use only.)
Not Yet Reviewed
$7,811.95
—
$7,931.95
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$13,202.00
—
$13,863.00
The most popular crate engine size just got better and easier with Ford Performance Parts X2347 Street Cruiser dressed long block crate engines. The proven 347 stroker combination has been optimized for street cruising with a perfectly matched cam/cylinder head/intake manifold/carburetor combination that runs on pump gas. Guesswork and installation issues are eliminated with a complete intake and distributor package that has been developed and tested by Ford Performance engineers. The X2347D engines are hand-assembled and dressed out with the best aftermarket performance parts translating into 360 hp and 400 lb.-ft. of torque at the crank! Ford Performance X2347 main features: * 4.030 in. bore and 3.400 in. stroke * Boss 302 8.2 in. deck height block * SCAT forged steel crankshaft * SCAT forged steel I-beam connecting rods * Forged Mahle pistons with floating wrist pins * Ford Performance aluminum, 64 cc chamber cylinder heads * 1.94 in. intake valves, 1.54 in. exhaust valves * 9.6:1 compression ratio * Edelbrock Performer RPM Air Gap manifold * Holley Street Avenger 570 cfm carburetor * 1.6:1 ratio roller rocker arms * Ford Racing black satin aluminum valve covers * MSD billet distributor * Ford Racing 9mm black spark plug wires * Hydraulic roller Comp Cams .533 in. lift intake and exhaust with 206 degree duration intake and exhaust at .050" lift * Double roller timing chain set * Ford Racing SFI-approved harmonic damper * High performance front or rear sump 7-quart capacity oil pan with windage tray and scraper * Maximum recommended rpm: 6,000 rpm * Internal balance; use neutral balance flywheel
Not Yet Reviewed
$12,555.00
Ford Performance Parts 2018 Gen 3 5.0L 460 hp Coyote long block crate engines are modern 32-valve DOHC V8s that use advanced features like direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, and more. The lightweight aluminum block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, plus optimized oil drainback and windage control to improve high-rpm performance. These Gen 3 5.0L 460 hp Coyote long block crate engines are the same as the Ford M-6007-M50C, but with an automatic transmission engine harness and flexplate. 2018 Gen 3 5.0L 460 hp Coyote features: * 460 horsepower; 420 lbs.-ft.-plus of torque * 12.0:1 compression ratio * Hypereutectic aluminum pistons * Sintered steel connecting rods (same as those used on Boss 302 Mustangs) * Forged steel crankshaft * Aluminum block features plasma-transferred wire arc spray weld liner coating * Longer 12mm head bolts for higher clamp load * 10 qt. capacity oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * 80mm single bore drive-by-wire electronic throttle body with variable runner control * 4 valves per cylinder * Mustang GT 409 stainless-steel tubular exhaust manifold on the right side only * Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines
( 1 )
$10,309.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
