Filters
Ford Performance Parts hydraulic roller lifters are offered as direct replacements for 302-351W production small block hydraulic roller lifters; and as high performance versions for higher rpm and severe-duty applications. The high performance hydraulic roller tappets were developed specifically for racing conditions and are recommended for performance and racing applications. Both standard and high performance hydraulic roller lifters use the production dog-bone type tie bars and retainer plate components included in M-6253-A50 hydraulic roller lifter installation kits.
( 91 )
$300.99
Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.
( 29 )
$3,998.99
Ford Performance Parts 2018 2.3L 310 hp EcoBoost long block crate engines are designed for traditional rear drive installations. They're the same EcoBoost engine found in the 2018 Mustang and feature turbocharging, direct injection, and twin independent variable cam timing (Ti-VCT). The swap possibilities are almost endless: from early street rods, kit cars, most generations of Mustang, to just about any other vehicle build. Ford Performance Parts 2.3L 310 hp Mustang EcoBoost engine kit—this kind of performance comes standard with a dose of adrenaline! Features and items: * 310 hp and 350 lbs.-ft. torque at 3,000 rpm (with 93 octane fuel) * Production turbocharger * Starter and mounting hardware * Alternator and mounting hardware * Flywheel * Engine harness (not installed, must be used with Ford Performance control pack) * Throttle body (not installed, must be used with Ford Performance control pack) * Engine kit uses Ford Performance Parts M-6017-23T control pack (not included) for easy plug-and-play installation
Not Yet Reviewed
$4,764.99
On Sale
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 651 )
$93.99
—
$96.99
$84.59
—
$87.29
Summit Bucks
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 117 )
$1,268.95
—
$1,408.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 159 )
$668.50
—
$1,372.50
Ford Performance Parts 2018 Gen 3 5.0L Coyote production cylinder blocks are original equipment for the 2018 Mustang GT 5.0L. They feature a plasma-transferred wire arc spray weld liner coating. This provides improved durability and heat transfer, reduced friction, and weight savings compared to previous Mustang GT aluminum blocks. All Ford Performance 2018 Gen 3 5.0L Coyote production cylinder block features are finish-machined, including head deck and crank bore. Features and items: * 93.0mm bore * Cylinder bores are finish-honed and ready to assemble * Cross-bolted nodular iron main bearing caps—uses 12mm cylinder head bolts * Block has provisions for piston oil squirters (included) * Plugs and dowels
Not Yet Reviewed
$1,099.99
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 3 )
$4,210.99
Ford Performance Parts guys live, eat, and sleep Ford. Their camshafts are designed for everything from mildly modified street rods to full-out drag racers. All Ford Performance Parts camshafts are designed for more power; with either improved low-to-mid rpm torque, or mid-to-high rpm horsepower. They're available in many different durations and valve lifts, in your choice of hydraulic, solid, or hydraulic roller lifter configurations. Depending on application, features may include: * More lift and duration * Available to work with stock pistons * No valve spring change required for some applications * Offered in grinds that provide noticeable power improvements with a lumpy idle while maintaining good drivability with manual transmissions * Also available as true street-strip camshafts that work best with manual transmissions or higher stall speed torque converters and high numerical rear-end gears * Offered in versions that work well with carburetors or mass air fuel injection
( 80 )
$191.99
—
$353.99
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 243 )
$403.95
—
$476.95
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 331 )
$66.99
—
$524.99
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 372 )
$170.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 312 )
$38.99
—
$119.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 185 )
$60.99
—
$74.99
Ford Performance Parts 5.0L/5.2L aluminum valve covers allow much greater dissipation and protection from exhaust manifold heat, thanks to the included foil tape along the cylinder head mating surface. This pair of cam covers retain factory coil cover provisions and the oil separator drain-back port that can be used with air/oil separator kits. Ford Performance Parts 5.0L/5.2L aluminum cam covers fit 2011-17 5.0L and 2015-19 5.2L engines. Features, items, and notes: * Can be powdercoated to customize your vehicle * 1 pair of camshaft (valve) covers * Camshaft cover gaskets * VCT solenoid grommets * Fasteners * Engine oil cap * F-150 engines will require the Coyote cam cover ball stud kit (M-6067B-F150) to install coil covers
( 20 )
$372.99
Ford Performance Parts camshaft drive kits include all of the components that you need for proper timing. They're offered in numerous packages for a variety of applications and include high-quality production components for increased durability. Depending on vehicle, kits may include new production: * Tensioner arms * Chain guides * Primary and secondary timing chains * Primary and secondary timing chain tensioners * Camshaft sprockets, spacers, bolts, and washers * Camshaft VCT phasers and bolts * Crankshaft sprockets, spacers, and washers * Crank position trigger wheel * Dowel pins and fasteners
( 42 )
$396.99
—
$872.99
Summit Racing offers Mustang conversion oil pans for a variety of small block Windsor engine applications from the 1970s, 80s, and '90s. These steel pans include a pickup, dipstick, and main cap stud—and they're available with a black or chrome finish. The wet sump style oil pans are ideal replacements, ensuring proper lubrication for your street/strip muscle car.
( 22 )
$169.99
—
$173.99
What's a high performance Ford without a set of Ford Performance Parts aluminum valve covers? Take your pick from cast aluminum covers with smooth, finned, and pentroof designs in a variety of polished, satin black, and powdercoated finishes. The valve covers are available in a variety of styles with an impressive array of Ford, Cobra, and Mustang logos that are sure to add an individual touch to your Ford. Features include: * Available for a wide variety of Ford engines * Baffled * May require modifications for roller rockers * Some applications will clear stud girdles and roller rocker arms * Where applicable, include oil fill cap and grommets * 1.200 in. round oil fill/PCV holes on some applications * Most are 50-state legal when installed with appropriate closed PCV hardware
( 176 )
$184.99
—
$439.99
Serious power needs serious strength, so Ford Performance Parts offers these 5.0 Coyote Mustang forged crankshafts for 5.0L Coyote engines. These cranks are designed to be absolutely tough to take the abuse that racing can inflict. They are constructed from forged 4130 steel and are precision-machined and balanced to ensure that they are they ready to go in your track or hardcore street car! Whether you are planning on dominating the strip, street, or road course, these Ford Performance Parts 5.0 Coyote Mustang forged crankshafts are ready for the challenge.
Not Yet Reviewed
$584.99
Whether you're dressing up or simply replacing an old oil pan on your vehicle, Ford Performance Parts has the oil pan for you. These oil pans are available in several finishes for a variety of applications, so there's sure to be one to suit your needs and your style.
( 96 )
$114.99
—
$1,406.99
Edelbrock Performer-Plus cam and lifter kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling cams for daily drivers, trucks, vans, RVs, and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.
( 111 )
$321.95
—
$339.95
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 301 )
$39.99
—
$614.99
Give your car, truck, or hot rod some extra motivation with ATK High Performance Ford 351W 385 hp Stage 1 long block crate engines. These engines are hand-built, balanced, and dyno-proven to ensure they are going to get you down the road, in a hurry and reliably. These engines come ready to be finished with your choice of factory dressings or aftermarket parts. Breathe some new life into your ride with these ATK High Performance Ford 351W 385 hp Stage 1 crate engines. ATK Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Edelbrock aluminum cylinder heads * OE crank and rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .512 int./.512 exhaust * Cam duration at 0.50- 220 int./224 exhaust * 9.5:1 compression * Valve covers * Timing cover * Oil pan, pump, and pickup tube
( 2 )
$4,958.99
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 6 )
$3,556.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
