Filters
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 3 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 3 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * Carburetion * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor, plug wires, and plugs * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 1 )
$5,359.99
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 2 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 680 cfm carburetor * Mechanical 80 GPH Fuel pump * 2,400-2,800 Stall converter * 91 plus octane fuel
( 2 )
$5,866.99
The Ridetech complete coilover suspension system for the 1961-65 Ford Falcon was built front the ground up to bring the Falcon into the 21st century. Ford Falcons are awesome! However, over 60 years have passed since the first Falcon was built—and the OEM 155/13 in. tires just won't cut it in today's world. FRONT: Ridetech started with fitting 225/40-R18 tires (recommended backspace 5.00 in.-5.25 in.) and then built a tubular control arm setup to provide all the correct geometry to get them to work effectively. The steering was also completely updated to provide quick response and virtually no bump steer. To finish off the front suspension, Ridetech fitted a new MuscleBar sway bar that's heavy enough to take on the most aggressive of drivers. This suspension package for the Ford Falcon will absolutely stun you! * Includes new Ridetech spindles (compatible with 1967-69 Camaro brakes) * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Bump steer reduced to less than 1/16 in. * Mini-Starter required to clear Tru-Turn draglink adapter (not Included) * Complete steering upgrade includes: Draglink (may require mini-starter for clearance), pitman arm (1 in. steering box sector shaft), idler arm, idler arm mount—compatible with manual steering, can be adapted to use Borgeson power steering system * Zero to over 7 degrees of caster possible * 1 1/8 in. solid front sway bar – Rate 608 lbs.-in. * When equipped with 225/40 -R18 tires, standard ride height is 22.75 in. ground to the fender lip * Optional frame brace available to reinforce lower control arm mounts and subframe. Compatible with V8 engine mounts only. REAR: Ridetech chose to fix the rear suspension in much the same way they've done on many muscle cars originally equipped with leaf springs: swap in a 4-link. This rear bolt-on 4-link suspension system completely transforms the little Ford Falcon into a world-class handling machine, and at the same time provides an incredibly smooth ride and bind-free operation. Starting off, the rear will accept up to a 225/40-R18 with a recommended backspace 5.50 in. – 6.00 in. and provide a ride height 18 3/4 in. ground to the fender lip. * Adjustable 4-link bars, including R-Joints * Triangulated 4-link; no need for panhard bar and keeps rear end movement vertical * Bolt-in cradle * Upper control arm axle mounts require welding * Spacers included to fit multiple factory leaf spring mounts (2 in. and 3 in.) * 3 mounting holes for lower control arm at axle: 1 – Top hole: Anti-squat 74.4 percent, Instant Center 72.8 in., Roll Center 12.95 in. 2 – Middle Hole: Anti-Squat 108.1 percent, Instant Center 58.35 in., Roll Center 11.67 in. 3 – Bottom Hole: Anti-Squat 135.5 percent, Instant Center 50.25 in., Roll Center 10.35 in. HQ Coil-Over suspension system for 1961-65 Ford Falcon includes: * Front and rear HQ Series Coil-Overs * Front upper and lower StrongArm tubular control arms * TruTurn system * Front sway bar * Rear 4-link system. * Also fits convertibles!
Not Yet Reviewed
$8,135.00
RideTech 1961-65 Falcon air suspension systems were built from the ground up to transform your old school Falcon into "new cool" for the 21st century. You will have the versatility to take your classic to the local cruise by yourself, load it down with friends, throw all your stuff in the trunk, or lay your Ford in the weeds and the air suspension will take care of leveling the car back out. The kits are offered with HQ or TQ Series ShockWaves. RideTech did the homework, got the geometry right, and matched the best components to deliver a strong bolt-on suspension system that will make your little Ford Falcon handle super tight and responsive, yet be compliant, quiet, and comfortable. RideTech 1961-65 Ford Falcon air suspension systems include: * Front and rear HQ or TQ Series ShockWaves * Front upper and lower StrongArm tubular control arms * TruTurn system * Front MuscleBar sway bar * Rear 4-link system
Not Yet Reviewed
$7,980.00
—
$10,325.00
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$5,029.99
—
$9,330.99
Scott's Hot Rods 4-bar rear suspension kits have a simple design, but will greatly improve the ride quality and handling of your hot rod or custom. These truly equal length parallel 4-bars use a very long, perpendicular panhard bar to maximize efficiency and reduce lateral movement. Both user-friendly and fully adjustable, the kits also use their CNC-machined and tapped stainless steel rod ends with right-hand or left-hand thread, allowing you to adjust the pinion angle and setup without unbolting the link bars. And unlike a Triangulated 4-link system, the pinon angle does not change throughout the travel of the suspension. The kits are offered with coilovers or airbags. Your rear suspension is just as important as the front to the ride and handling of your car; install a Scott's Hot Rods 4-bar rear suspension kit and increase your driving pleasure. Additional notes and what's included: * CNC-machined 1 1/8 in. x 1/4 in. wall DOM tubing link and panhard bars (adjustable RH- and LH-thread) * Scott's utilize a bar as long as possible per vehicle application to ensure the least amount of lateral movement * CNC-machined stainless steel rod ends--RH- and LH-thread * FK Bearing heim joints--RH- and LH-thread * Aldan American single-adjustable coilovers or Firestone 9000 tapered air springs * Coilovers are the most popular for everyday cruisers * Airbag kits are for those who want to lay their vehicle on the ground * Upper shock crossmember is standard on all kits allowing you to determine final ride height when installing * Rear-end housing brackets * Front frame brackets * 5/8 in. Grade 8 hardware * Lifetime guarantee
( 4 )
$5,011.99
—
$5,114.99
Detroit Speed QUADRALink rear suspension kits offer 4-link geometry for the best possible handling. These kits are a great way to upgrade from your original leaf spring suspension. They feature Detroit Speed's patented Swivel-Link that allows the suspension to fully articulate with smooth, solid motion and no binding—and it's done without Heim joints! QUADRALink uses tuned high-Durometer rubber bushings, rather than noisy, short-life Heim joints or squeaky urethane bushings. Plus, unlike other kits, these suspensions utilize an adjustable panhard rod that provides precise and effective rear axle lateral location during hard cornering. The long upper links provide great pinion and U-joint angle control, while the rear upper shock crossmember strengthens the rear body and frame section. QUADRALink rear suspension kits are available for a variety of specific vehicle applications; select the model to enhance your ride!
( 1 )
$5,173.95
—
$6,917.95
RideTech 1961-65 Falcon HQ Series coilover suspension systems were built from the ground up to transform your old school Falcon into "new cool" for the 21st century. RideTech did the homework, got the geometry right, and matched the best components to deliver a strong bolt-on suspension system that will make your little Ford Falcon handle super tight and responsive, yet be compliant, quiet, and comfortable. RideTech 1961-65 Ford Falcon HQ coilover suspension systems include: * Front and rear HQ Series coilovers * Front upper and lower StrongArm tubular control arms * TruTurn system * Front MuscleBar sway bar * Rear 4-link system
Not Yet Reviewed
$7,815.00
RideTech 1961-65 Falcon TQ Series coilover suspension systems were built from the ground up to transform your old school Falcon into "new cool" for the 21st century. RideTech did the homework, got the geometry right, and matched the best components to deliver a strong bolt-on suspension system that will make your little Ford Falcon handle super tight and responsive, yet be compliant, quiet, and comfortable. RideTech 1961-65 Ford Falcon TQ coilover systems include: * Front and rear TQ Series coilovers * Front upper and lower StrongArm tubular control arms * TruTurn system * Front MuscleBar sway bar * Rear 4-link system
Not Yet Reviewed
$9,905.00
ATK High Performance Ford 302 300 hp Stage 3 long block crate engines with EFI are designed to work with most stock components, and to have great street manners. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 EFI engines are available for front sump pan or Fox Body pan. Typically ATK Ford 302 300 hp complete EFI engines consist of: * Seasoned OE roller block * OE Ford cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * OE cylinder heads * Stamped steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$5,959.99
Detroit Speed Front Speed Kit 1 handling packages are designed to work as an integrated system on your vehicle. By utilizing proven Detroit Speed components and carefully selecting components designed to complement each other, they are made for your driving needs, while having the ease of bolt-on installation. Speed Kit 1 handling packages are designed to bring your classic GM muscle car into the 21st century with improvements in ride, handling, and camber/caster correction.
( 1 )
$5,444.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
