Availability
Showing In Stock Items. Show All 40 Items.
Instant Rebate
Hypertech's In-Line Speedometer Calibrator Modules are an in-line module that corrects your vehicles speedometer and odometer for unlimited tires sizes and/or rear gear ratios. These modules are perfect for vehicles with computers that don't allow for tire size and/or rear gear ratio correction or want to re-calibrate for sizes outside the range of programmers. Installation is a snap. Using the included USB cable, connect the Hypertech In-Line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations to tire height or rear gear ratios. Next, simply disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster, and you¹re done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).
( 20 )
$224.96
Just going with the flow? Not a good idea when dealing with the gas level in your vehicle. Dorman fuel tank level sending units are solutions to help keep you from running out of gas. These quality OE replacements will restore reliable fuel gauge readings with the proper fit and function. Replace a failing unit with the Dorman tank level sensor designed for your vehicle application.
( 58 )
$187.99
AutoMeter factory-match analog gauges are designed to match your gauges' look in the daytime—and have exactly the same lighting as your OEM gauges at night. These replacements feature factory matched gauge faces, numbers, and pointers, so they'll look like stock originals. They're available to monitor more than a half-dozen functions, and are available in options such as face and numeral color, bezel, sweep, and more. Order the dials to complement your dash instrumentation.
( 34 )
$88.99
—
$257.99
Instant Rebate
Changing tire and gear sizes can have an adverse effect on your speedometer and odometer readings. To correct this, Hypertech has assembled some of the best features from their series of programmers and tuners into one stand-alone unit. Hypertech speedometer calibrators will adjust for a wide range of tire sizes and gear changes (not all applications can adjust for gear changes) to keep your speedometer reading properly without the additional cost of buying a complete tuner. Installation is as easy as plugging one of the calibrators into your vehicle's OBDII diagnostic port, and while you're there, they can even read and clear diagnostic trouble codes.
( 46 )
$251.96
Banks Power iDash Stealth pods are vehicle-specific grab handle mounts designed to work with the low-profile nature of the iDash. Each is designed to fit the factory A-pillar grab handle while concealing wires for a factory look, and securely mounts to the body of the truck while being angled to enhance gauge viewing and ergonomics. Constructed from OE-grade Polyamide-12, iDash Stealth pods can be installed in minutes, and are built to last the life of your truck through hot summer days or cold winter nights. Each pod ships in a natural black finish and can be painted by you to color-match your interior. Choose the Banks Stealth pod designed for your vehicle.
Not Yet Reviewed
$109.00
S&B Filters fuel sending units help eliminate low fuel level issues with your Powerstroke engine. Aftermarket lift pumps provide more fuel to your diesel engine but face issues at a 1/4 tank fuel level. S&B sending units allow you to drive to empty with your pump, using a Venturi jet pump powered by your aftermarket external lift pump to keep the reservoir full, even with extremely low fuel levels in the tank. They are completely plug-and-play, with no need to modify your OEM tank or sending unit, so you can keep them intact and completely stock. S&B Filters fuel sending units have been tested in a wide range of low fuel level scenarios and is made out of OEM materials that are designed to withstand an aggressive fuel environment. Options are available for Ford Crew cab short bed or long bed applications. *For use with aftermarket lift pumps only. Works with any fuel tank, OE, or aftermarket.
Not Yet Reviewed
$299.00
Maintaining a healthy engine requires a watchful eye on the vitals—and monitoring just became easier with AutoMeter Spek-Pro diesel truck gauge and pillar kits. These pre-made towers offer an easy view of such gauges as boost, pyrometer, and transmission temperature. Many options are available for Ram, Ford, and GM diesel trucks, including pillar and dial colors, bezel finishes, gauge quantity, and speaker holes. You select from seven colors to illuminate the backgrounds, adjustable for day or night brightness, with separate dimming for the dial and pointer. The gauges are programmable for high and low limit warning alerts; when activated, two 2 amp control outputs are also able to control fans, external warning lamps, or buzzers. AutoMeter Spek-Pro diesel truck gauge and pillar kits deliver some of the largest displays ever assembled on 2 1/16 in. dials, and the plug-and-play wiring harness makes installation as simple as filling the gas tank.
( 1 )
$554.99
—
$763.99
If you are looking for a device to help calibrate for your large aftermarket tires, read/clear trouble codes, adjust your speed limiter and more, then look no further. The Ford Flashcal is a product designed to give features and calibration tools to truck owners at a great price. The days of clunky, outdated calibration tools are over. Flashcal has trucks covered and the market cornered with quality and pricing that can't be matched.
( 10 )
$278.95
If your sending unit has gone south, then you need to get one of these Motorcraft fuel tank sending units. They are made from high-quality materials, so you know that they will fit.
( 5 )
$497.99
These steering column gauge pods are a perfect way to mount your new AutoMeter gauges. They're easy to install, and fasten right onto the steering column with no modifications. Each pod is custom-designed to fit your vehicle's make and model year precisely, securely housing 2 1/16 in. single or dual AutoMeter gauges without obstructing your view of the factory cluster. They are constructed using durable ABS plastic and can be painted to match your stock interior. AutoMeter steering column gauge pods make a great addition or alternative to the traditional A-pillar gauge mount!
( 64 )
$49.99
If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some significant drawbacks including the 1/4 tank issues that result in cavitation of the pump when you draw air into the fuel system. To resolve this issue there are Fleece Performance SureFlo performance sending units. SureFlo units are designed to work with aftermarket lift pumps and fit directly into your stock sending unit location. Each one features factory-style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit, ensuring you are always drawing fuel into your pump and not drawing air into the fuel system, as well as eliminating the dreaded 1/4 tank problems. The SureFlo bucket also incorporates one-way check valves to allow fuel to easily flow in at lower levels. Fleece Performance SureFlo performance sending units are a great alternative for trucks originally equipped without an in-tank pump needing to repair a malfunctioning level sender or if you are simply looking to run your own custom fuel lines directly to the tank. Choose the SureFlo unit designed for your Cummins or Duramax fuel system. Features: * New fuel level electronics and fuel float * Heavy-duty billet aluminum cap * Universal -8 AN ports for professionally plumbing a custom fuel setup * New O-ring or flange seal * Adaptation pigtail connector (where applicable)
( 5 )
$359.00
If your sending unit has gone south, then you need to get one of these Dorman sending units. They're made from high-quality materials, so you know that they will fit.
( 18 )
$679.99
Overhead console gauge pods are the perfect solution for mounting your new AutoMeter gauges. The pod shells are easy to install, and they attach securely above the rearview mirror on the windshield. They're custom-designed to fit your vehicle's make and model year precisely. AutoMeter gauge pods are constructed using durable ABS plastic that can be painted to match your stock interior. Various pod housings are available to mount between one and four gauges.
( 9 )
$78.99
—
$95.99
On Sale
These AutoMeter Ultra-Lite diesel truck gauge kits are the perfect solution to monitoring your diesel's functions. Available in single, dual, and triple A-pillar styles, they mount within easy view and don't clutter up your dash. These gauge kits feature AutoMeter's famous Ultra-Lite gauges, with lightweight aluminum construction, silver bezels, and silver faces with easy-to-read black increments.
( 2 )
$121.99
—
$502.99
$109.79
—
$452.69
Edge dash pods offer a unique solution for Juice with Attitude, Evolution, or Insight customers looking to add that finished, factory look to their truck. These dash pods may need to be painted to match your interior color.
( 3 )
$99.95
AutoMeter pillar gauge pods are the perfect solution for mounting your new AutoMeter instruments. They're easy to install and mount securely to your windshield A-pillar. Each pod is custom-designed to fit your vehicle's make and model year precisely. Choose the style you need to accommodate from one to four gauges. AutoMeter's durable ABS plastic pods are available in various colors and gauge diameters, and can be painted to match your stock interior, if desired.
( 330 )
$61.99
—
$123.99
On Sale
Bully Dog gauge pillar pods are the cleanest and most convenient install for your device. These custom A-pillar mounts simply slide over the top of the stock A-pillar, allowing easy readability without obstructing the driver's view of the road. The pod pillars can be painted to match any interior color, if you desire a customized look. Choose the model designed for your gauges or computer programming tuner.
( 13 )
$79.99
$62.99
—
$71.99
On Sale
Bully Dog dash mount gauge pods install easily on the dash, positioning your gauges in an easy-to-read place. They are custom-molded to fit each vehicle and feature a black finish. Read your gauges while keeping your eyes forward on the road with one of these Bully Dog dash mount gauge pods.
( 4 )
$66.99
$60.29
AutoMeter offers instrument cluster bezels for a variety of vehicle applications. Made from durable ABS plastic, these replacement, upgrade, or add-on "frames" are offered in styles to house up to five gauges. Order the model best suited for your dash panel.
( 3 )
$110.99
Dorman odometer drive gears will help you repair your odometer in an easy and inexpensive way. The single drive gear that turns the dials in your gauge can break down and fall apart. These replacement gears are made from an injection-molded plastic material that's stronger than stock parts. When your odometer skips or works only intermittently, Dorman can help restore accurate function.
Not Yet Reviewed
$34.99
Agility Auto Parts offers a complete line of fuel tank sending units covering a wide variety of North American vehicles. These sending units are engineered to meet or exceed all OEM specifications. They're corrosion-resistant, leak-resistant, and made of durable materials for long-lasting use. Agility Auto Parts fuel tank sending units are available in a range of sizes and attachment styles. Order the model recommended for your applications.
( 4 )
$151.99
—
$188.99
AutoMeter factory-match analog gauge kits are designed to match your instrumentation look in the daytime, with the exact same lighting as your OEM gauges at night. They feature factory-matched gauge faces, numbers, and pointers, so they'll look like stock originals direct from the assembly line! The AutoMeter diesel kits include a pillar pod mount with the gauges pre-installed and ready to fit right in. Choose the gauges desired, along with the pod style (dual, triple, etc.) and color you prefer for your ride.
( 11 )
$490.99
Summit Bucks
Delphi fuel tank sending units provide correct gas gauge readings. These sending units feature empty float height and float retention to exact OE specifications. Delphi builds them with internal springs for increased durability and enhanced stability to prevent tube chafing, and gold-filled fuel level sensors that provide improved resistance to sulfur corrosion and heat. Plus, their lower amperage draws less load on your vehicle's electrical system. With their more than 50 years of OE experience in fuel handling systems, shouldn't you trust your vehicle to the accuracy of Delphi fuel tank sending units?
( 1 )
$294.99
—
$431.99
Dash pods from AutoMeter put your gauges right where you can see them—at eye level. They deliver a custom-designed solution for each dash-mounting application to help make the installation a breeze. Offering a factory-installed appearance, the versatile dashboard pods are available in a variety of styles and configurations to mount different quantities and gauge diameters. Order the model recommended for your vehicle.
( 35 )
$68.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
