Availability
Showing In Stock Items. Show All 16 Items.
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 1 )
$799.91
Upgrade your 2021-2023 Ford F-150's 3.5L EcoBoost engine's capability with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 F-150 with 3.5L engine (non-Raptor models) * Improved throttle response throughout the rpm range * Peak power = 450 hp @ 5,250 rpm, +55 hp @ 5,250 rpm * Peak torque = 510 lbs.-ft. @ 3,500 rpm, +100 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: Does not fit 3.5L Powerboost Hybrid engines. Not applicable to Raptor models. Not for use in F-150 Lightning. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions please contact Tech Line.
Not Yet Reviewed
$792.99
Enhance your 3.5L EcoBoost engine's performance in your F-150 Raptor with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 Raptor F-150 equipped with 3.5L engine only * Peak power = 466 hp @ 5,500 rpm, +26 hp @ 3,250 rpm * Peak torque = 554 lbs.-ft. @ 3,250 rpm, +54 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: For Raptor F-150 equipped with 3.5L engine only. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$824.99
Granatelli Motor Sports Pro Series Xtreme coil packs output a whopping 65,000 V, making them the undisputed king of coils. Specifically designed for supercharged, turbocharged, and high-level nitrous applications, these Xtreme coils will not suffer the spark blowout common in weaker coils. And, thanks to Granatelli's patented isolator rings, there is 0 ohm resistance and no RFI/EMI interference. Up your engine's power to perform with a set of Pro Series Xtreme coil packs from Granatelli Motor Sports.
( 13 )
$774.01
—
$838.95
On Sale
MSD Digital E-Curve distributors will drop right into your engine and fire up with three simple connections! Not only are there no external controls or boxes to mount and connect, but you can set a timing curve with the twist of a rotary dial! That's right, no more springs or stop bushings to fumble with. A new digital module lets you select from 20 different "centrifugal" curves and five vacuum curves--that's 100 combinations! Simply remove the cap to access the rotary dials and select a curve to match your application. You can also set an rpm limit that will protect your engine from over-rev damage caused by a missed shift or driveline failure.
( 36 )
$849.95
Granatelli Motor Sports Pro Series coil packs exceed your OEM expectations with increased performance. Pro Series 60,000 V coils provide more volts than factory and are intended for those running high compression engines and small nitrous kits. These coil packs increase horsepower and improve mileage and throttle response; plus, they are OBD-II computer safe. Thanks to Granatelli patent protected isolator rings, there's no RFI/EMI interference and 0 ohm resistance. Get incredible output with a set of Granatelli Motor Sports Pro Series coil packs.
( 5 )
$814.86
—
$820.09
Make it louder with The Beast bolt-on air horn kits by Kleinn! They feature a triple-threat of tuned, high-impact black ABS train horns on a flat rack mount, which means they require up to 40 percent less clearance than other full-size horns. The trumpets can be separated from the rack for easier installation and they are always ready to blast thanks to a full onboard air system with a 100 percent duty cycle air compressor and three-gallon steel air tank. They also feature a tire inflation kit with a storage bag that allows you to power your horns and other accessories, like air bags and small tools. Basic hand tools are all you will need to install your own 100 percent bolt-on "Beast" air horn kit with model-specific brackets for the tank, compressor, and trumpets. Order the Kleinn air horn kit designed for your application. More product features, items, and specifications include: * High-output, 100 percent duty cycle, waterproof air compressor (6530RC or 6450RC -application dependent) * Air tank (3-gallon) * Model 230 Beast black triple train horn produces a thundering 153.3 decibels * Tire inflator with couplers and storage bag (not for use with aftermarket power side steps) * Vehicle-specific, powdercoated mounting brackets * All necessary components needed for installation * Upgradeable for louder blasts with BlastMaster air valve kit for a blistering decibel level * Illustrated step-by-step instructions
Not Yet Reviewed
$929.95
Kleinn direct-fit train horn and onboard air systems include a train-style triple horn system and a high-output waterproof air compressor. They also feature custom designed bolt-on mounting brackets and a remote mount quick-connect tire inflator system. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order the Kleinn direct-fit train horn and onboard air system best suited for your application. More product features, items, and specifications include: * High-output, 100 percent duty cycle, waterproof air compressor (6530RC or 6450RC -application dependent) * Air tank (1 1/2-gallon or 3-gallon -application dependent) * Model 730 Demon black triple train horn produces a thundering 157.89 decibels (SDKIT17734 only) * Model 230 Beast black triple train horn produces a thundering 154.3 decibels * Remote mount quick-connect tire inflator with 30 ft. hose and storage bag * Spare tire location horn mount (spare tire removal required - SDKIT17734 only) * All necessary components needed for installation * Illustrated step-by-step instructions
Not Yet Reviewed
$1,029.95
FAST XDi Pro Race Circle Track distributors highlight machined billet housings. Available for several applications, the GM models have adjustable slip collars and most are approved for use in NASCAR competition. FAST XDi Pro Race Circle Track distributors typically feature: * Dual optical triggers synchronized within .2 degrees * Precision, stainless steel, photochemically etched trigger disc * Electronically synthesized magnetic trigger output * Ground and polished steel shaft * Wire retainer cap for secure fit * Individual cylinder timing capability * Double lip seal on shaft for oil and vacuum control * Status LED light for quick diagnostic check on optical triggers * Timing light tuning within .5 degree of optimum timing point * Distributor equipped with two optical triggers for redundancy
Not Yet Reviewed
$919.95
Modal Header