Availability
Showing In Stock Items. Show All 41 Items.
Whether you're building a tow rig, race truck, or just want to keep your daily driver on the road for the long haul, you need to upgrade your head bolts with Gator Fasteners heavy-duty head stud kits. Gator head studs have a much higher strength and will not stretch like the factory bolts, helping to keep your truck from popping head gaskets. Designed for stock to moderately built engines. Gator studs are manufactured with 8740 material with an added proprietary element and black oxide finished. They are rated at 220,000 psi tensile strength, providing the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. Choose the head stud kit designed for your truck.
( 2 )
$424.99
Tune your camshaft timing with COMP Cams adjustable cam gear sets. Your 2 and 4-valve engines have the capacity to make horsepower, but the factory timing gear setup can keep you from accomplishing your goals. COMP Cams adjustable cam gear sets provide up to 12 degrees of camshaft advance or retard, install just like the original factory gears, and work with OE timing chains. The sets feature both a steel hub and a steel outer gear for heightened durability and light weight. The ability to adjust the cam timing is important when your performance engine modifications are completed. Get the most from your engine with COMP Cams adjustable cam gear sets.
( 6 )
$341.95
One of the key fuel injection components of the 7.3L and 6.0L engines is the BD Diesel High-Pressure Oil Pump (HPOP). They're also a common replacement part when dealing with low oil pressure problems—which can result in poor fuel atomization, loss of power, excessive smoke levels and/or loss of economy. Order the oil pump recommended for your vehicle application.
Not Yet Reviewed
$479.95
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 235 )
$498.50
—
$498.90
PRW Pro Series billet aluminum rocker arms offer outstanding power and performance advantages for street, strip, and track applications. Laboriously made from high-strength 6061 T-6 aluminum extrusions, each piece is precision CNC-machined, and hand-finished to ensure the quality you expect from PRW. These stud-mount rockers are purposely machined to graciously allow for larger springs and retainers, with full-cage, friction-reducing needle bearings for added durability. PRW Pro Series billet aluminum rocker arms are used around the world by professional racers, engine builders, and hot rod enthusiasts. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * PRW RockerLocs * Heat-treated steel nose rollers and shafts minimize wear between roller tip and valve stem * Rated at 750 lbs. open spring pressure * Internal oiling system for long-lasting performance * Distinctive blue anodized finish
( 12 )
$364.86
—
$370.01
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 8 )
$286.48
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 136 )
$261.99
—
$292.99
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$313.99
—
$486.99
Mishimoto baffled oil catch cans are designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. They feature custom grooves in the catch can's inlet that turbulates the air longer and ensures that all of the oil sinks to the bottom, leaving nothing but clean air to pass through the 40 micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions. These catch cans are machined from 100 percent billet 6061 aluminum, and accept AN fittings at the inlet, outlet, and drain area—allowing for over 27 possible configurations. For maximum fitment options, the top cog mounting setup enables the cans to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for AN return to the oil pan. Mishimoto baffled oil catch cans are washable, unlike many other cans that require you to replace your filtration system, and they're available in a variety of colors. Order the model recommended to fit your vehicle, engine, and/or transmission application.
( 32 )
$341.95
Dorman timing covers are a direct replacement that matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards. Features: * Direct replacement - this engine timing cover matches the fit and function of the original equipment cover. * Durable construction - this part is specifically designed to withstand extreme underhood temperatures for a long service life. * Cost-effective solution - offers original equipment quality at a competitive price. * Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life.
( 117 )
$340.95
PRW cylinder head stud kits offer heavy-duty fasteners, along with 12-point nuts and washers for Ford Powerstroke engines. These replacement studs are machined from 4135 chromoly steel and finished with a black oxide. They provide superior clamping power, compared to the stock bolts—which will solve the problem of head gasket failure caused by increased cylinder pressure.
( 1 )
$345.29
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 54 )
$254.99
—
$345.99
Cloyes timing chain kits meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These assemblies are available in various styles, including link belt, single roller, and single non-roller. Order the kit designed for fitment on your specific model or engine application.
( 174 )
$275.99
—
$331.99
Take your engine's performance to new heights with PRW Elite Series stainless steel full roller rocker arms, are engineered for maximum strength, speed, and precision. They are built for serious racers and performance enthusiasts who demand superior control and durability. Precision engineered with Direct Oil Feed Technology, a tight-fit nose roller axle, and E-Coated stainless steel rocker bodies, this series delivers smoother motion, increased RPM potential, and unmatched long-term reliability under extreme conditions. Features: * Rated up to 1000 lbs. open spring pressure * Direct Oil Feed Technology for enhanced lubrication and performance * 25% narrower roller reduces valve-end mass for higher RPM response * Precision-machined nose roller axle for smooth, friction-free motion * 12-Point polylocks included for secure, hassle-free installation
Not Yet Reviewed
$488.61
These high-strength, nodular-iron street performance balancers from Pioneer offer bonded balancer technology to meet the budget of every performance street engine builder from mild to wild. They also make great heavy-duty standard replacement balancers and are perfect for limited-spec race classes, such as late model stock, that require an OE-style balancer. The bonded dampening rubber in these balancers eliminates spinning and component separation, giving reliable performance in engines using up to 6,500 rpm. All Pioneer street balancers feature easy-to-read, permanently etched timing marks on the outer ring.
( 54 )
$464.99
Dualoy cast pistons are designed for diesel and medium-duty gas engines. They're cast from aluminum and machined in-house to maintain the highest level of quality and consistency. The diesel applications feature an iron ring insert in the top ring groove designed to accept the Keystone-style top ring. Dualoy piston sets are available for most popular diesel light or medium-duty truck applications and engine codes.
Not Yet Reviewed
$455.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 194 )
$454.99
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 20 )
$419.99
—
$459.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 139 )
$262.99
—
$274.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$261.99
—
$274.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$250.95
Moroso truck oil pans are made from the finest steel and aluminum available. Each pan is jig-welded and block-fit to minimize warpage and ensure proper fit and sealing. Before leaving Moroso's factory, each pan is leak-tested for the ultimate in quality control. Pans are available for street and off-road use, and are built with extra strength for unsurpassed durability.
( 4 )
$302.99
Save time and money! Dorman offers a large selection of valve covers constructed from high-quality plastic, steel, or aluminum that resist warping, cracking, and porousness. The metals are corrosion-resistant, and all covers come with the appropriate number of gaskets to provide tight, lasting seals against oil leaks. They are all direct replacements to ensure a proper fit every time. Order the valve covers designed for your specific make/model or engine.
( 49 )
$308.99
These Pioneer race balancers bring the advantages of bonded rubber to high-revving race and street/race applications where an SFI-approved balancer is required. Each balancer features a precision CNC-machined AUSI 1045 steel center bonded to an equally strong steel inertia ring. The advanced design makes these balancers very lightweight for all-steel products. The steel inertia ring on these models is positively protected against forward and backward movement and has the added assurance of bonded rubber to eliminate spinning. Every Pioneer race balancer features easy-to-read, computer-etched timing marks.
( 50 )
$444.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
