Availability
Showing In Stock Items. Show All 19 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$140.95
—
$199.95
$109.95
—
$151.15
On Sale
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 33 )
$142.95
—
$155.95
$128.65
—
$140.35
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$136.95
—
$249.95
$123.25
—
$224.95
On Sale
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 187 )
$131.95
$118.75
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$157.95
—
$199.95
$142.15
—
$179.95
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$218.95
$120.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
$103.45
On Sale
B&M differential covers are strong and cool! Cast and machined from premium aluminum alloy, they feature heavy-duty structural cooling fins, a larger fluid capacity, and high-strength magnetic drain plugs that aid in catching ferrous metal particles. B&M differential covers add some strength with extra cooling ability to your rear end.
( 151 )
$293.65
—
$378.95
$246.95
—
$264.25
On Sale
Mr. Gasket mechanical fuel pumps are rated from 80 to 110 gph in a variety of applications for many Chevrolet, Ford, Chrysler, and Pontiac V8 engines. Mr. Gasket fuel pumps are suitable for use with street performance and high-output racing applications when a mechanical pump is desired or required. Features include: * Shutoff pressure pre-set from 6.5 to 8 psi depending on application * Fuel pressure regulator is not required due to built-in shutoff * Heavy-duty aluminum construction for continuous high-rpm operation * Lower pump body can be clocked in different positions to adapt to orientation requirements * Inlets and outlets tapped for 1/4 in. or 3/8 in. NPT to match specific applications
( 32 )
$157.95
—
$177.95
$142.15
—
$160.15
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Scott Drake offers Street/Strip HEI distributors for a wide range of applications, including many Ford and Mercury cars, trucks, and vans from the 1960s, '70s, and '80s. These units are designed for the enthusiast looking to replace outdated points or a stock distributor with a dependable high-energy ignition distributor. Converting to an HEI system makes installation and set-up easy. Just drop it in and connect two wires—it's that simple! This high performance distributor features a 50,000 V coil that delivers 2x the energy across the spark gap compared to a stock HEI distributor. It will fit all 1964-84 Ford 302 motors (will not fit 1985 and later 5.0L/302 roller engines, and will not clear stock air cleaners).
Not Yet Reviewed
$149.95
$134.95
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$349.95
$192.95
On Sale
Mr. Gasket aluminum valve covers are fabricated from 100 percent TIG-welded 6061 T-5 aluminum sheeting for a perfect lightweight fit. Available in natural, polished, powdercoat, or anodized finishes, they'll enhance the appearance of any engine compartment. The covers feature an extended sealing lip to positively locate and secure the gasket from moving, eliminating oil leaks. These valve covers can be ordered with plain or finned tops, and each piece includes a 1 1/4 in. diameter breather hole (except where noted). Order the model designed for fitment on your make/model and engine type.
( 79 )
$215.95
$194.35
On Sale
ACCEL 8.8mm spiral wire sets are custom-tailored for true street/strip performance use. They feature oversize 8.8mm ultra performance wires and spark plug boots, double silicone construction with a fiberglass braid, and a spiral-wound steel core conductor. The sets are available with distributor terminal ends and spark plug boot end options for fitment on a variety of specific applications. If you're looking for excellent ignition performance for your street/strip ride, order the ACCEL 8.8mm spiral wire set designed for your vehicle.
( 5 )
$166.95
$108.95
On Sale
These Mallory E-Spark conversion kits are just what you needed to replace those old points and update your ignition system. They eliminate the pesky problem of constantly having to change and adjust points. These kits include all parts that fit inside the stock distributor cap, so everything is self-contained and looks original from the outside.
( 27 )
$160.95
$144.85
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 31 )
$412.95
$227.95
On Sale
K&N washable lifetime performance air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,400 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable--and are custom-designed to fit into your existing factory air box. Their drop-in design means that adding performance is simple. With most vehicles, you simply remove the disposable air filter and replace it with one of these K&N air filters. Find the model designed for your specific vehicle application.
( 1159 )
$117.99
$92.99
On Sale
Are you rebuilding your engine or installing a new camshaft? These Summit Racing™ timing chain and gear set Pro Packs include a new double-roller timing chain set, a cam change gasket set, rocker arm oil deflecting clips, assembly lubricant, and Loctite RTV 598 silicone. Complete your cam change with one of these Summit Racing™ timing chain and gear set Pro Packs.
( 18 )
$170.12
$167.86
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
