Availability
Showing In Stock Items. Show All 13 Items.
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 607 )
$1,042.00
—
$1,257.00
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 155 )
$1,099.99
—
$1,289.99
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 246 )
$1,109.99
—
$1,291.99
Magnaflow Overland Series performance exhaust systems provide the performance and versatility your off-road adventures demand. Explore further with a high clearance design that improves ground clearance, combined with robust stainless steel construction to withstand the toughest terrain. All Overland Series products have been specifically tuned to be comfortable for long drives—while still bringing out the unique character of your rig. Order the model recommended for your application.
( 10 )
$1,206.00
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
( 26 )
$1,113.99
—
$1,293.99
On Sale
Spool up your turbo faster and get rid of exhaust quicker using Stainless Works turbo downpipes. They are manufactured from quality 304 stainless steel and are CNC mandrel-bent to ensure a good fit and sealing. In addition, they're available either with catalytic converters for street use, or without them for off-road use.
Not Yet Reviewed
$1,757.50
$1,480.00
AWE Tuning 0FG exhaust systems combine 2FG (H-pipe) and 1FG (resonated front sections) configurations with dual 3 in. T304L stainless steel tail pipes and 5 in. double-walled AWE exhaust tips in chrome or a signature diamond black finish. The result is a unique soundtrack tailored perfectly for your truck that comes to life under boost while remaining civil in and out of the cabin at cruising speeds. Handcrafted and CNC mandrel-bent, AWE 0FG exhausts provide a weight savings of 41 lbs. total, and each tip is individually adjustable, allowing bumper depth to be set according to personal taste.
( 8 )
$1,030.00
—
$1,340.00
On Sale
Corsa Sport exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. The robust, aggressive-sounding Corsa Sport exhaust systems are manufactured from premium stainless steel, with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right every time, Corsa exhausts go on fast--no cutting or welding is necessary.
( 289 )
$1,080.99
$972.89
—
$1,170.99
MagnaFlow Rock Crawler exhaust systems are designed to fit with aftermarket bumpers. The Rock Crawler exhaust has high-clearance design for off-road rock crawlers and melds quality with durability. Mandrel-bent tubing and a perforated steel core boost exhaust flow and the parts are dyno-proven to produce maximum power.
( 1 )
$1,064.00
Specifically created for Californians, Walker CalCat universal fit catalytic converters comply with regulations for OBD-II and pre-ODB-II vehicles. These converters feature a universal, weld-in design at a great cost savings over expensive OEM converters and feature a stainless steel body, heat-shielded pipe, and structural brace for enhanced strength and durability. Get the best balance of performance and price from Walker CalCat universal catalytic converters. Order the model designed for your application needs.
( 42 )
$1,076.99
On Sale
aFe Vulcan Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Vulcan Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation, with most applications requiring no modifications. Vulcan Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. They're constructed of 304 stainless steel and include black or polished 304 stainless steel tips with a laser-cut stainless steel aFe power badge. Order the model with size specs and other options recommended for your vehicle.
( 3 )
$1,128.75
$1,015.88
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
