FORD Ford modular V8 - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Holley Terminator X MAX Engine Control Modules

Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

4.29 out of 5 stars ( 7 )

$1,229.95

McLeod RST Street Twin Clutch Kits

Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability

4.49 out of 5 stars ( 84 )

$1,175.00

—

$1,295.00

On Sale

QuickTime Bellhousings

QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.

4.5 out of 5 stars ( 107 )

$1,126.95

—

$1,449.95

Ford Performance Parts Fox Tuned by Ford Performance Suspension Leveling Kits

Ford Performance Parts Fox Tuned by Ford Performance suspension leveling kits match the advanced technology of Fox 2.0 Performance Series IFP front and rear shock kits with the tuning of Ford engineers. These proprietary kits are designed and tested to optimize ride and performance on-road and off, making them the best solutions for the most discriminating performance enthusiasts. Features include: * Front coilovers feature top-quality racing coils selected to deliver the optimal spring rate * Levels truck front to rear * Improved front approach angle over stock * Improved breakover angle over stock * Vehicle-specific upper front mounts include composite bushing to isolate noise and vibration * Locking, spring preload rings allow easy front ride height and preload adjustments * Provides a comfortable on-road ride and predictable off-road handling in even the toughest conditions * Easy bolt-on installation with no other modifications required Fox 2.0 Performance Internal Floating Piston shocks: * 2.0 in. impact extruded and CNC-machined 6061-T6 clear anodized aluminum one-piece body resists rust over time and increases cooling capacity * Hard-anodized body plating for a durable finish * Internal IFP monotube reservoir design separates shock oil from the high-pressure nitrogen * Black-anodized, CNC-machined 6061-T6 billet aluminum components * 5/8 in. hard chrome plated heat-treated alloy steel shafts * Race-developed high-flow piston design * Ford Performance specific valving to maximize performance * Redundant sealing pack system main seal, wiper seal, and scraper seal * JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Quiet nitrile rubber bushings allow for increased suspension articulation

4.83 out of 5 stars ( 6 )

$1,376.99

Ford Performance Parts Hot Rod Camshafts

Ford Performance Parts engineers seem to eat, sleep, and breathe one thing: Blue Oval performance! Their selection of camshafts covers a variety of specific applications—from mildly modified street rods, to full-out drag race cars. These hot rod camshafts result in an engine with considerably more power, while retaining the function and advantages of the computer system. Ford Performance Parts designs dual-pattern cams for either low-to-mid rpm torque or mid-to-high rpm horsepower. Choose from among the options offered for duration, valve lift, and style—including hydraulic, solid, or hydraulic roller lifter. (Refer to Notes above for additional Hot Rod cam specs.)

5.0 out of 5 stars ( 11 )

$1,048.99

McLeod RXT Street Twin Clutch Kits

McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability

4.68 out of 5 stars ( 47 )

$1,245.00

—

$1,495.00

Strange Pro Race Steel Front Brake Kits

These Strange Pro Race steel front brake kits offer a tremendous weight savings over OEM brake components. The entire 4-piston brake kits, complete with bearings, hubs, rotors, pads, calipers, etc., weigh only 33.5 lbs. They are unsurpassed in detail, as is evident in the hub design. Each hub has one bolt circle. Instead of adding an additional bolt circle, Strange machined five large lightening holes to reduce rotating weight. The billet aluminum hub is further lightened by its scalloped design and fully machined billet aluminum hubcap.

4.18 out of 5 stars ( 28 )

$1,203.99

Injector Dynamics ID1050x Fuel Injectors

Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life

5.0 out of 5 stars ( 9 )

$1,092.00

—

$1,134.00

COMP Cams XFI NSR Modular 3V Camshafts

COMP Cams XFI NSR Camshafts for Ford 4.6L/5.4L modular 3-valve engines are the first truly "drop-in installation" camshafts ever created for this popular application – striking the perfect balance of performance versus installation difficulty. An excellent alternative to the regular COMP Cams Xtreme Energy Ford Modular camshafts, these 2-staged cam sets require no computer re-tuning; however testing has shown that mild tuning can result in power gains even greater than the normal 25 rear wheel horsepower. These camshafts are fully compatible with the factory variable cam timing (VCT) system and are designed to operate in the stock rpm range.

4.86 out of 5 stars ( 7 )

$1,028.95

Trick Flow® Track Max® Hydraulic Roller Camshaft and Valve Spring Upgrade Kits for Ford 4.6L/5.4L 2V

Trick Flow® takes the guesswork out of choosing the right cams and valvetrain upgrades for your Ford 4.6L/5.4L 2V modular engine with these Track Max® hydraulic roller camshafts and valve spring upgrade kits. Kit number TFS-K51802001 is perfect for naturally aspirated street engines operating in the 1,500-5,000 rpm range. Kit number TFS-K51802002 has an 1,800-6,500 rpm operating range and is ideal for mild street/strip engines with power adders using a maximum of 5-6 psi of boost. Kit number TFS-K51802003 delivers strong mid-range to top-end power (up to 6,500 rpm) in extreme duty street and naturally aspirated race engines. Kit number TFS-K51802004 is Trick Flow's highest-performing modular cam kit. It is recommended for maximum duty race engines with power adders and boost pressures of 15-plus psi that operate in excess of 6,500 rpm. The kits come complete with new cams and valve springs plus chromoly retainers, valve locks, seals, 12mm bolts and washers, and installation instructions. PCM tuning is recommended for maximum performance.

4.0 out of 5 stars ( 4 )

$1,205.99

—

$1,206.99

QA1 Proma Star Double Adjustable Coilover Systems

Dial in your ideal ride quality with the independently adjustable compression and rebound valving of QA1 Proma Star double adjustable coilover systems. They offer the perfect balance of street-ability and performance and are an ideal choice if you plan to use your car on the road and occasionally take it to the track. With QA1 Proma Star double adjustable coilover systems you will improve overall handling, increase suspension tunability, and gain the ability to adjust ride height quickly and easily for a perfect stance and corner balance your car, maximizing performance. They are easy to install with basic hand tools in the factory mounting locations and does not require the use of a toe link relocation kit. Coilovers are available with multiple spring rate options to help you find the perfect option for your intended use. The medium springs are great for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering, and providing a more planted feel.

4.75 out of 5 stars ( 4 )

$1,078.95

Tilton ST-246 Twin Disc Clutch Kits

Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque

4.11 out of 5 stars ( 9 )

$1,487.50

Wilwood DynaPro Radial Front Drag Brake Kits

Wilwood DynaPro radial front drag brake kits put the "stop" in your stopping power, and they're lighter than your stock brakes! Compact enough to fit inside 15 in. drag wheels, these narrow front drag kits feature forged billet DynaPro 4-piston radial mount calipers—with heavy-wall stainless steel pistons to resist corrosion and slow heat transfer from the pads. High performance street/strip SmartPads are shipped with the kits for added stopping power with great fade and heat resistance. Wilwood kits also include solid steel or vented iron rotors and hardware. They bolt on without spindle or steering-linkage modifications, and are fully compatible with the factory master cylinder output. Order the model designed for fitment on your vehicle—then enjoy heavyweight stopping power with lightweight Wilwood DynaPro radial front drag brake kits.

2.5 out of 5 stars ( 2 )

$1,106.59

—

$1,126.80

Doug's Headers

Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.25 out of 5 stars ( 713 )

$1,021.20

Flaming River 2015-20 Mustang Manual Rack and Pinions

Flaming River 2015-20 Mustang manual rack and pinions are a great way to streamline the engine to the compartment while maintaining smooth, responsive steering. They're lighter than the OEM EPAS (electronic power assisted steering) S550 Mustang power systems, and depending on specifications, will reduce vehicle weight by 10 to 15 lbs. by eliminating hoses, pulleys, and pumps. Plus, they have billet aluminum mounting brackets that can also be adjusted to modify the pinion angle for large tube headers and engine swaps in custom applications.

Not Yet Reviewed

$1,053.99

RAM Concept 10.5 Dual-Disc Metallic Clutch Kits

RAM Concept 10.5 dual-disc metallic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 1,050. RAM Concept 10.5 dual-disc metallic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit

1.0 out of 5 stars ( 1 )

$1,279.00

The Driveshaft Shop Level 6 Axles

The Driveshaft Shop introduces Level 6 1400 hp axles for the 2010-14 Camaro V8. They've designed a new one-piece outer CV for the application that is not only stronger but more cost-effective to manufacture. This saves you money without sacrificing durability! These direct bolt-in axles feature CNC rolled splines for extra strength. Full 30 spline certified 300M center bars (not just 28 spline like a factory 108mm CV would use)—30 spline, like the Viper T56 and any upgraded T56. If the cages are stronger, the bars need to be also. The Driveshaft Shop has also included their certified 4340AQ cages REM polished with a re-designed radius on the cage window. Cages are full 4340, not the standard material that has been carbonized and made brittle.

Not Yet Reviewed

$1,096.48

McLeod RXT 1200 Clutch Kits

Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.

5.0 out of 5 stars ( 12 )

$1,395.00

—

$1,495.00

Pedders EziFit Shocks and Struts

Pedders EziFit shocks and struts are now an ideal alternative to buying separate components when converting your vehicle from original equipment suspension to a more high performance suspension setup. Reduced installation time is the key benefit from the use of the Pedders EziFit, as the spring, shock/strut, and mount are all supplied pre-assembled. No need to use the spring compressor, as the work is already done for you! Just unbolt the old and bolt in the new. Order the model recommended for your car or truck application.

Not Yet Reviewed

$1,079.96

DeWitts Direct-Fit Radiators

DeWitts direct-fit radiators install in the stock mounting position and use the factory connections without any modifications or adapters. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores contain two rows of cooling tubes, a serpentine fin, and are epoxy-free. These radiators feature press-formed end tanks and are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. They are available with a standard finish or an exclusive black ice epoxy coat for a great OEM look. DeWitts direct-fit radiators can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.

5.0 out of 5 stars ( 5 )

$1,059.99

Rough Country N3 Suspension Lift Kits

Rough Country offers N3 Series suspension lift kits for thousands of trucks from the late 1960s and up—including models from Chevrolet, GMC, Cadillac, Dodge, RAM, Ford, Jeep, Toyota, Nissan, and Mazda. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle anywhere from 1.5 in. to 7.5 in. This is accomplished via a variety of lift component options, such as steering knuckles, torsion bar keys, spacers, strut kits, A-arm brackets, coil springs, leaf springs/blocks, upper control arms, Add-a-Leaf, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, a clean level look, increased ground clearance, and plenty of ride height to accommodate larger tires. Rough Country kits feature front and/or rear N3 nitrogen-charged shocks for incredible ride quality on- and off-road. Most kits are 100 percent bolt-on, requiring no cutting, drilling, or welding. Enhance your rig with all-new stature; order the lift kit recommended for your truck!

3.53 out of 5 stars ( 15 )

$1,049.95

—

$1,449.95

Auburn Gear Select-A-Loc Differentials

Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.

3.1 out of 5 stars ( 10 )

$1,056.50

—

$1,444.99

Roush 2021-25 Ford F-150 5.0L Cold Air Intakes and Exhaust System Combos

Roush 2021-25 Ford F-150 5.0L cold air intake and exhaust system combos pair perfectly matched components in one performance package to upgrade your truck with awesome advantages. Roush Performance cat-back exhaust systems transform your truck with robust, corrosion-resistant T-304 stainless steel construction, high-flow mandrel bends to enhance exhaust flow efficiency, and a high-flow performance muffler engineered to deliver a race-inspired exhaust tone that will undoubtedly bring a smile to your face. This premium upgrade for your F-150 with increased airflow and less back pressure, helps to achieve your truck's full potential in horsepower and torque. The system is finished with 304 stainless steel tips featuring the Roush logo, and installation is easy, utilizing factory hanger locations and the necessary hardware included. Roush Performance cold air intakes bring great performance increases, achieved with an installation that takes under an hour and no calibration required. Newly designed, the CAI provides more efficient air intake than the stock airbox with much less restriction in forced induction applications, increasing engine performance with no PCM re-calibration required. Two important benefits of Roush CAI systems are latent potential in power and fuel efficiency that would otherwise be restricted, as well as reduced pressure drop. And since the systems are engineered and tested specifically for Ford F-150 applications, custom tuning is not a requirement. Experience the thrill of enhanced acoustics and performance provided with a Roush 2021-25 Ford F-150 5.0L cold air intake and exhaust system combo. Cold air intake highlights: * Increased inlet and airbox sizing -- allow for maximum airflow -- provides additional induction noise and aggressive performance sound * Designed using OEM CAD data -- guarantee optimized fitment, keeping heat out, and encouraging maximum performance * EPDM rubber couplers for proper fitment under engine load, rocking, and twisting * Utilizes factory mounting locations and hardware for quick, easy installation * High-flow, high-capacity dry filter with clamp -- proven to retain its shape -- composed of an inner and outer layer of wire mesh for durability and reliable support of filtration media -- requires no oiling and is easily washable for re-use * Oversized injection-molded air box tray * Clean air tube * 105mm mass airflow tube * Required mounting hardware and instructions

5.0 out of 5 stars ( 1 )

$1,324.28

DeatschWerks X3 Series Fuel Pump Modules

Specializing in high performance EFI fuel system solutions, DeatschWerks X3 Series fuel pump modules for the Ford F-150 are built and packaged with components that work together to deliver the flow you need and the OE functionality you want. Each module includes accommodation for three pumps, integration of a return fuel line, and retention of all functionalities of an OE module. The DW X3 modules consist of a top-hat, center section, installation kit, and bucket. DeatschWerks X3 Series fuel pump modules are available with no pumps, triple DW400 pumps, or as a complete package with module, pumps, and PTFE plumbing kit. Choose the DW X3 desired for your F-150. X3 module features: * OEM tank fitment * Anodized aluminum construction * Retains all OEM sensor, capacity, and surge features * 310 percent increase over OEM F-150 pump module * Supports over 1,900 whp on pump gas forced induction * Fits up to three DW100, 200, 300, 400 or 420 fuel pumps

Not Yet Reviewed

$1,399.00

—

$1,479.00

FORD Ford modular V8 Parts and Accessories