Availability
Showing In Stock Items. Show All 20 Items.
FLOTEK 180cc small block Ford cylinder heads feature as-cast ports, up to 0.550 in. lift, and are designed for entry-level street performance applications operating in the idle-to-5500 rpm range. They come fully assembled and ready for a bolt-in installation; bare models are also available. Replace your stock heads with high performance FLOTEK 180cc small block Ford cylinder heads. Order the model recommended for your engine application. Additional notes: * This item is not sold as a pair; this is a single cylinder head * Available for 289, 302, and 351W engines * Will not accept stock pushrods * Thermactor plugs (EGR) not included (Trick Flow® small block Ford thermactor inserts recommended) * PAC, Manley, Comp Cam springs, and custom builds available
( 18 )
$349.00
—
$494.00
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 787 )
$262.99
—
$507.99
FLOTEK 185cc Small Block Ford Thumper cylinders heads feature a raised "floor" and "roof" design. Why you ask? This allows a better approach to the valve when attempting to achieve high performance and to keep air and fuel attached to short turn radius for increased torque over a wider rpm range without sacrificing high-rpm power. Coupled with the new chamber design for better wet flow quality and a "W" design exhaust port to keep flow attached to the port floor which greatly increases exhaust gas evacuation verses original 180cc design. Always thinking of the racer, the FLOTEK Thumper 180 accepts stock manifold!
( 4 )
$359.00
—
$489.00
ARP high performance cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs. A black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings. Keep your cylinders mounted securely with a set of ARP high performance cylinder head studs; order the hardware recommended for your year/make and engine application
( 34 )
$287.99
Manufactured by ARP, Edelbrock head bolt kits contain a complete set of the highest quality head bolts and hardened washers available. They are cold-formed to ensure molecular integrity and heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal to facilitate cylinder head re-torquing. Hardened and parallel-ground washers are included, and they're rated at 170,000 psi.
Not Yet Reviewed
$355.95
On Sale
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 40 )
$472.99
$278.99
—
$586.99
Whether you're building a tow rig, race truck, or just want to keep your daily driver on the road for the long haul, you need to upgrade your head bolts with Gator Fasteners heavy-duty head stud kits. Gator head studs have a much higher strength and will not stretch like the factory bolts, helping to keep your truck from popping head gaskets. Designed for stock to moderately built engines. Gator studs are manufactured with 8740 material with an added proprietary element and black oxide finished. They are rated at 220,000 psi tensile strength, providing the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. Choose the head stud kit designed for your truck.
( 2 )
$424.99
—
$579.99
On Sale
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$499.99
$329.99
—
$449.99
PRW cylinder head stud kits offer heavy-duty fasteners, along with 12-point nuts and washers for Ford Powerstroke engines. These replacement studs are machined from 4135 chromoly steel and finished with a black oxide. They provide superior clamping power, compared to the stock bolts—which will solve the problem of head gasket failure caused by increased cylinder pressure.
( 1 )
$269.96
—
$501.02
Trick Flow® cylinder head stud kits feature precision centerless-ground studs thread-rolled to Mil-S-8879 specs to keep your heads mounted securely in high-compression, high-boost applications. Hardened parallel ground washers are included for uniform load distribution and accurate torque readings, and a black oxide finish protects the studs from wear and corrosion. The kits contain enough studs and washers to install one pair of cylinder heads.
( 10 )
$416.99
Summit Racing™ cylinder head stud kits offer a more accurate and uniform clamping. Kits include washers and strong, high-quality steel studs with a black oxide finish for added durability. Fasten your performance application with a Summit Racing™ cylinder head stud kit, available for a variety of diesel applications.
( 2 )
$349.99
Milodon head studs are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. They are premium-grade and race-quality, created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. These studs are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts. These studs are available for dozens of specific cylinder head style applications.
( 11 )
$313.95
PROMAXX Performance Series One small block Ford cylinder heads are affordable, high-flow as-cast versions of fully CNC-ported heads. These heads feature ultra-smooth 356 T-6 aluminum casting, 5-angle valve jobs, precision CNC machining, and diamond-honed bronze guides. Put track-tested performance under your hood with a formidable pair of professionally assembled Series One small block Ford cylinder heads. They are available assembled or bare. Features, items, and specs: * 175cc as-cast intake runners * Multiple spring options * Assembled heads include 21-4N one-piece swirl-polished back-cut stainless steel valves, 3/8 in. studs, and adjustable guide plates
( 1 )
$511.00
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 370 )
$496.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
