Availability
Showing In Stock Items. Show All 85 Items.
On Sale
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
$690.80
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$1,022.50
—
$1,578.50
$920.25
—
$1,420.65
On Sale
If you need the world's finest high performance street/strip small block Ford heads, then check out AFR's 185cc emissions-legal Renegade Street cylinder heads (CARB E.O. #250-3). With lightweight 8mm, 2.020 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 or 72cc, and 68cc exhaust ports, AFR's 185cc Ford cylinder heads are designed for 302-351 c.i.d. engines operating from 1,500 to 6,500 rpm. A 3/4 in. thick head deck makes the AFR heads ideal for nitrous or blower applications. These heads will not accept rail rocker arms, and hardened push rods are required on models designed for stud mount rocker arms.
( 37 )
$2,328.90
$2,212.55
On Sale
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,449.95
—
$2,549.95
$2,203.95
—
$2,293.95
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$435.95
—
$514.95
$391.95
—
$462.95
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,332.95
—
$1,479.95
$1,199.66
—
$1,331.96
On Sale
For the ultimate small block Ford street car, consider AFR 165cc SBF Renegade 20 degree street heads. Unlike some aftermarket heads, AFR's Ford cylinder heads (CARB E.O. # D250-3) fit all of your stock components; no special parts are required! With lightweight 8mm, 1.900 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 and 60cc, and 68cc exhaust ports, these emissions-legal aluminum cylinder heads are perfect for 289 and 302 engines operating from idle to 6,000 rpm. A 3/4 in. thick head deck makes the heads ideal for nitrous or blower applications. Renegade cylinder heads will not accept rail rocker arms, and hardened pushrods are required on models designed for stud mount rocker arms.
( 28 )
$2,328.90
$2,212.55
On Sale
AFR 220cc SBF Renegade 20 Degree Competition Heads are the largest, best-flowing choice to top your small block Ford. These power-producing cylinder heads are born of A356 aluminum castings and feature intake ports, exhaust ports, and combustion chambers that are all 100 percent CNC-ported. Renegades are outfitted with lightweight 8mm, 2.100 in. intake valves and 1.570 in. exhaust valves to move massive amounts of air. They come with either combustion chamber volumes of 58 or 72cc accompanied by 70cc exhaust ports, which are raised .375 in. higher than stock. Plus, AFR's trademark 3/4 in. thick cylinder head deck makes them ideal for heavy nitrous or blower applications. Choose the flow characteristics that can give your Ford the power to win—AFR 220cc SBF Renegade 20 degree competition heads.
( 12 )
$3,143.70
$2,986.80
On Sale
Holley's Ford 7.3L Godzilla high-mount accessory drive complete kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$2,599.95
—
$3,199.95
$2,338.95
—
$2,878.95
On Sale
Enhance the look of your engine with a pair of Scott Drake classic aluminum valve covers for small block Ford engines. Diecast from high-quality aluminum alloy, the covers are available in more than a dozen styles to customize your ride. Finish options include polished, black, black wrinkle, and black powdercoat. These valve covers also feature a cadmium plated oil filler tube to help stop corrosion, an improved oil baffle design to accommodate high-lift cam shafts—and will work with most roller rockers. Order the model designed for your vehicle application.
( 183 )
$224.95
—
$249.95
$202.45
—
$224.95
On Sale
Professional Products PowerForce harmonic dampers are extremely durable—and economically priced. They're built with a bonding process which adheres the elastomer to the I.D. of the inertia ring and the O.D. of the hub, utilizing a strong adhesive along with an improved elastomer to create a much stronger bond. PowerForce dampers also feature white, easy-to-read timing marks against a painted black background. Each unit is accurately balanced and closely machined for the correct fit. Dozens of models are available for applications from 1955 and up. Choose the size, material, finish, keyways, and other options recommended for your vehicle.
( 332 )
$86.99
—
$121.99
$78.29
—
$109.79
On Sale
Are you building your own personal street/strip weapon? These AFR 195cc SBF Competition cylinder heads are designed for you. To make big horsepower, you need heads that can flow large amounts of air--that's where AFR, the masters of airflow come in. These heads feature a 195cc intake port, 70cc exhaust ports, and your choice of 58 or 72cc combustion chambers to complement your engine. To get the fuel and air in and out efficiently, AFR uses lightweight 8mm 2.050 intake valves and 1.600 exhaust valves. The thick deck makes these heads ideal for nitrous or blower applications with the optional nitrous/blower exhaust port. These heads are most at home on performance engines operating primarily between 2,000 and 7,000 rpm. Dominate the street and strip with the help of AFR and these 195cc SBF Competition cylinder heads.
( 1 )
$2,947.35
$2,799.65
On Sale
These Professional Products SFI Spec PowerForce Plus dampers provide more applications for a wider range of engines. All Professional Products PowerForce Plus dampers feature a bonding process, which adheres the elastomer to the i.d. of the inertia ring and the o.d. of the hub. Through subsequent research and development, Professional Products has perfected a new process that utilizes a stronger adhesive, along with an improved elastomer, to create a much stronger bond. Professional Products dampers all feature clear, white, easy-to-read timing marks against a painted black background. In addition, they engrave a mark every 90 degrees, which is also painted white (90 degree marks are not on small block Ford dampers). You won't find any dampers that are more accurately balanced or more closely machined for the correct fit than the Powerforce or Powerforce Plus line of high performance street or SFI Spec racing harmonic dampers.
( 73 )
$153.99
—
$204.99
$138.59
—
$184.49
On Sale
Holley High-Mount complete accessory systems offer exceptional clearance for swap applications when your chassis clearance is very limiting. They mount your accessories higher on the engine with many configurations and accessory options available. Holley High-Mount complete accessory systems are available in a natural, black, or polished finish. Order the kit designed to fit your LS/LT engine.
Not Yet Reviewed
$2,299.95
—
$2,649.95
$2,068.95
—
$2,383.95
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,087.50
$870.00
—
$978.75
On Sale
Weiand oil pan packages were clearly visible on those old gassers, getting them down the track with speed and consistency. The oil pan features trap door baffles to help keep oil under control during hard acceleration, as well as increased oil capacity to keep high performance engine oil systems fed properly. Choose from among dozens of Weiand oil pan packages—a great option for drag race, road race, and circle track applications.
( 107 )
$299.95
—
$331.95
$172.95
—
$298.75
On Sale
Holley's Ford 7.3L Godzilla high-mount accessory drive base kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$1,549.95
$1,393.95
On Sale
Professional Products pulley spacers make up the difference. These spacers are made from quality aluminum or steel, depending on the application, providing proper fitment for pulley alignment.
( 55 )
$23.99
—
$25.99
$21.59
—
$23.39
On Sale
Scott Drake FE oil filter adapter is an exact reproduction of the updated version Ford switched to in 1968 which provides increased oil flow compared to earlier versions. It is an excellent upgrade for any pre-1968 high performance engine where oil flow is critical.
( 15 )
$76.15
$68.55
On Sale
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
$1,519.16
—
$1,655.06
On Sale
Mr. Gasket cast aluminum covers are constructed of high quality die-cast aluminum for an excellent fit. They are available in polished, finned, and ball-milled versions to fit a variety of engines. Features: * Top quality cast aluminum construction * Choice of smooth top polished, finned, or ball-milled designs * Some available in tall versions for additional rocker arm clearance * Thick gasket rail area for excellent sealing * Pre-punched breather openings with baffles * Includes mounting hardware
( 90 )
$99.95
—
$110.95
$89.95
—
$99.85
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$274.99
—
$1,399.99
$247.49
—
$1,259.99
On Sale
5.0L Ford Coyote engines are popular engines being swapped into classic Ford muscle cars and trucks. Weiand Coyote swap oil pans are specifically designed for the installation of Gen 1 and 2 or Gen 3 Coyote engines into 1965-79 Ford F-Series trucks. The pans feature high-quality pressure-tight cast aluminum construction with an OE appearance and clean exterior styling. Select the correct pan for your swap. Features of Weiand Coyote swap oil pans: * Complete kit includes a hinged-door sump baffle, OE-quality pick-up tube, and mounting hardware * Maintains oil capacity of stock Mustang Coyote oil pan (8 qt. nominal) to ensure adequate oil supply in all street performance and mild on-track applications * Installs using stock Coyote engine gasket/baffle assembly to provide factory-like sealing and oil windage control characteristics * Pick-up tube is based on the OE design, manufactured with smooth bends minimizing any possible flow restriction to the oil pump inlet * Bolt-in hinged-door baffle maintains oil at the pick-up, providing consistent oil pressure to the engine * Three cast-bosses, one on each side and one at the front-left, may be drilled and tapped for a hose fitting if turbocharger or breather can oil returns are required * Sump design is made for the original truck chassis front crossmember or for Crown Vic front suspension conversions
Not Yet Reviewed
$499.95
$374.95
—
$448.95
On Sale
Brighten and freshen up your engine compartment with a Scott Drake oil cap. These Scott Drake oil caps not only look sharp, but they will also keep oil in its place.
( 92 )
$26.13
—
$57.09
$23.52
—
$51.35
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
