Availability
Showing In Stock Items. Show All 18 Items.
Easily add a cone-style filter to the end of your SCT 90mm Big Air MAF meter with one of these SCT Big Air 2900 MAF cone filter adapters. The SCT Big Air 2900 MAF cone filter adapter flange is CNC-machined from aluminum for superior strength, and yet is lightweight. They're designed to fit either a BA-2600 or BA-3000 SCT Big Air 90mm MAF meter.
( 2 )
$59.99
S&B Filters map sensor spacers significantly decreases the amount of soot buildup. Your stock diesel setup leads to a ton of soot being built up on the MAP sensor over time--requiring constant cleaning. Install S&B Filters map sensor spacers, so you have one less thing to worry about.
( 3 )
$69.00
S&B Filters intake boot kits are built to last a lifetime. All boots come with stainless steel hose clamps so you don't have to reuse the old OEM clamps. These kits are available with different components for use on a variety of Ford F-250 and F-350 trucks from the mid-1990s. Here are the contents: * MODEL SBF-83-2012: Comes with (2) stainless steel hose clamps. Direct replacement for the failure-prone orange turbo intake boot found on 1994-96 OBS Powerstroke trucks. Does not fit E Series vans or 1997 trucks equipped with the black turbo intake boot. S&B Intake boot is made with four plies of aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. Replaces Ford turbo inlet 1820102C2. * MODEL SBF-83-2013: Comes with (4) T-bolt clamps and (4) hose clamps. Only use the T-bolt clamps for the lower spider clamp locations if they have been reinforced with Riff Raff Plenum inserts. Use the hose clamps if they have not been reinforced. You will have two clamps left over after the install. The turbo intake hose only replaces the factory orange boot and will not fit E-Series vans or 1997 OBS trucks with the black turbo intake boot. The S&B turbo boot and intake manifold plenum boots made with aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. Replaces Ford turbo inlet 1820102C2 and intake manifold boots F6TZ-6C640-A.
Not Yet Reviewed
$69.00
BBK cold air intake replacement hardware and hose kits will freshen up the look of your BBK Performance cold air kit. Each replacement set includes all the silicon couplers and clamps included in the original kit. This is a great way to replace your old, dirty, and dried or cracked hoses on your BBK cold air intake kit.
( 4 )
$59.99
—
$69.99
aFe Dynamic air scoops deliver high-speed airflow to improve your vehicle's performance and throttle response. The scoops are available in lightweight powdercoated aluminum for a clean appearance, as well as plastic and a high-gloss, clearcoated twill weave carbon fiber that offers great strength, less weight, and aggressive looks. Any of the aFe choices install easily with the necessary hardware included—and will lower intake air temperatures by forcing more cool air from your front grille into your intake system. The scoops are available in a variety of configurations for fitment on specific vehicle applications.
( 11 )
$76.00
—
$82.00
S&B Filters air scoops provide an enormous mouthpiece that feeds cooler, denser air to your engine for better performance. These durable units help lower your vehicle's exhaust gas temperature (EGT)—and pressurize the intake air box with cool air from outside the engine compartment while driving. S&B air scoops are water ingestion tested and designed to expel water and snow. They're available in a variety of configurations for proper fitment on numerous makes and models. Breathe easy, your engine and warranty are protected.
( 1 )
$99.00
aFe Torque Booster air intake tubes provide smooth and direct airflow for minimal pressure loss and maximum cfm gains. The aFe air intake tubes improve throttle response and acceleration. The black textured molded tubes help reduce heat transfer to the air intake. For better performance, upgrade your stock intake with an aFe Torque Booster air intake tube.
( 3 )
$82.00
BBK air inlet adapter kits are designed to allow your cold air intake to bolt onto the speed density system. They come complete with mounting hardware and instructions.
Not Yet Reviewed
$99.99
Dorman offers these air intake hoses to replace your OEM cracked or broken air intake hoses. They are manufactured from quality materials and can be installed easily without any modifications. Available for passenger cars, trucks, or SUVs, the Dorman air intake hoses will get all of the air flowing to your throttle body.
( 22 )
$53.95
—
$90.95
Dorman turbo-to-intercooler tubing couplers are constructed from high-grade silicone for direct replacement, providing a proper fit and longer life. Also known as intake manifold hoses, they efficiently restore power to your diesel engine. Dorman intercooler tubing couplers are engineered to hold up against high temperatures and remain resistant to oil and leaks, as well.
( 2 )
$74.99
On Sale
Steeda cold air intake restrictors allow you to add horsepower and torque to your Mustang, while maintaining your factory tune. They'll give you increased power for your daily driving needs with regular gas. And, since they can be easily removed or installed, you can use them at the track to run performance tunes, with no computer flash required. Your car will still produce up to 10 hp and 10 ft.-lbs. of torque to the rear tires with 87 octane fuel. Check applications for compatibility.
Not Yet Reviewed
$94.95
$85.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
