Availability
Showing In Stock Items. Show All 43 Items.
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 831 )
$174.99
—
$249.99
Although the Series 2 Cold Air Intake kits have been a huge success, JLT Performance engineers have outdone themselves again by creating the Performance Series 3 Cold Air Intake kits. The new Series 3 Cold Air Intake kits feature a 4 1/4 in. I.D. roto-molded plastic tube designed to resist engine heat and keep the intake air charge nice and cool. With having a 110mm MAF molded right into the tube, airflow is fast and smooth. Horsepower gains of up to 20-30 hp are typical when the JLT Performance Series 3 Cold Air Intake kits are installed with the required proper tuning. Order the model recommended for your vehicle.
( 2 )
$259.00
On Sale
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$219.95
—
$329.95
$175.96
—
$263.96
BBK cold air induction systems are a quick and easy way to gain an additional 10-14 hp! These kits feature a long-lasting conical air filter and an unmatched high-flow design for superior performance and striking good looks. The tubes are available in steel and aluminum, with a half-dozen finish options. Order the model designed for your vehicle and engine application. Don't just take our word for it—BBK Cold Air Induction Systems can be found under the hoods of thousands of cars from coast to coast.
( 45 )
$279.99
Airaid revs up your engine with its SynthaMax MXP Series cold air intake kits! These induction units offer a high performance, maximum-flow design teamed with high-tech filtration technology at its best. Their one-piece, roto-molded air box cancels out restrictive factory designs, while their massive cross-linked, high-density polyethylene air intake tube maintains proper air/fuel ratios; no recalibration is needed after the install. Add to this the super-synthetic, oil-free maintenance of SynthaMax washable, reusable filters—and you have clean, cold air for your gas or diesel beast to breathe for improved horsepower and torque.
( 12 )
$367.99
JLT Performance Ram Air intake kits bring great looks and huge power to your ride! These assemblies have a large I.D. at the mass airflow sensor (MAF) and a sizable opening at the throttle body—to meet the demands of the largest of throttle bodies the aftermarket has to offer. Included is a roto-molded heat shield to block off engine heat, a top-of-the-line Powerstack air filter with deep pleats and built-in screens to strengthen airflow across the MAF. The units are then finished off with silicone reducers and stainless clamps, creating the best intake on the market! Pump up the volume of cool air to your engine with JLT Performance Ram Air intake kits.
( 1 )
$249.00
—
$269.00
Dorman offers these air intake hoses to replace your OEM cracked or broken air intake hoses. They are manufactured from quality materials and can be installed easily without any modifications. Available for passenger cars, trucks, or SUVs, the Dorman air intake hoses will get all of the air flowing to your throttle body.
( 22 )
$117.99
—
$164.99
Airaid modular intake tubes optimize airflow to the engine by replacing inefficient originals. Factory tubes often have accordion-shaped walls, sound-canceling baffles, and undersized tube diameters that hurt airflow. The Airaid modular intake tubes help straighten and improve airflow to the engine, while also offering the best location for your mass air sensor. This design provides better throttle response, additional horsepower, and better fuel economy. These tubes are constructed from cross-linked, high-density polyethylene for strength and resistance to heat transfer. Airaid modular intake tubes are direct replacements for factory models, accommodating all sensors and fittings that attach to the factory tube. These tubes also work with the factory throttle body and intake box, and they include all necessary couplers and clamps for installation.
( 167 )
$175.99
Clearance
Don't let your stock air box hold your vehicle's performance back. The experts at Trick Flow® have engineered TFX™ cold air intake kits to meet the intake airflow demands of your fuel injected ride. The kits replace your restrictive air cleaner with a low-restriction reusable filter, a tuned molded black plenum (where applicable), mounting hardware, and instructions. They are manufactured by K&N for Trick Flow®.
( 137 )
$237.99
—
$289.99
Using their original cold air intakes as a guide, JLT engineers molded, sculpted, and perfected everything until they had the best looking, fitting, and performing system money can buy: the JLT Performance Series 2 cold air intake kits. One of the best parts of these assemblies is their molded-in MAF housing right in the tube. This allows you to own an intake kit you can grow into and not have to upgrade or replace when you reach a certain horsepower threshold. If you drive a high performance machine and only want the best, you can trust JLT Series 2 cold air intake kits to deliver!
( 1 )
$259.00
Bolting 30 extra horsepower onto your vehicle doesn't get much easier than using these March Performance Ram Air kits. They add 15 hp by scavenging cold air from under the bumper and forcing it into your engine. These kits include an air scoop, a flex hose, hardware, and instructions.
( 7 )
$173.99
—
$218.99
Airaid SynthaFlow Jr. cold air intake kits target the restrictive elements of factory intake systems—the intake tube and the paper filter—to boost horsepower and mileage. These air intake kits feature Airaid's oiled SynthaFlow Direct-Fit Premium replacement filters and modular intake tubes. As with other Airaid intake systems, SynthaFlow Jr. kits help straighten and improve clean airflow to the engine for added throttle response with increased horsepower and torque. Each kit is custom-built to fit specific vehicles, is easy-to-install, and requires no drilling. SynthaFlow filters are washable, reusable, and fully backed by the Airaid no-hassle lifetime warranty. Order the model designed for your vehicle application. Features include: * Oiled SynthaFlow replacement filter—recommended for dusty, dry driving conditions * Helps boost horsepower and acceleration * Replaces stock air filter and intake tubing while retaining stock air box * High-airflow premium filter * Low restriction polyethylene intake tube * Easy-to-install with little mechanical knowledge
( 8 )
$262.99
aFe Magnum Force Super Stock Pro Dry S systems increase air flow, horsepower, and torque to offer your ride a new level of power and performance. These aFe systems include intake tubes, one-piece mandrel-bent tubing with durable wrinkle black powdercoat that directs unrestricted airflow from the massive filter to the turbo for more horsepower and torque. aFe Magnum Force Super Stock Pro Dry S air intake systems are direct bolt-on kits that require no cutting or drilling for the installation, and all clamps, couplings, and hardware are included. Features of aFe Magnum Force Super Stock Pro Dry S intake systems: * Pro Dry S filter features 3-layers of progressive media to provide maximum flow with excellent filtration (progressive layering of media allows the filter to flow at high levels even when dirty * Pro Dry S non-oiled synthetic air filter requires no oils for cleaning for maximum convenience * Silver Bullet throttle body spacer is precision machined from 6061 T-6 billet aluminum for lightweight, high-strength, and the perfect fit and finish * Serrated/Helix design of spacer creates air turbulence in the intake manifold to increase the air pressure in the combustion chamber resulting in increased horsepower, torque, and improved throttle response * Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs
( 2 )
$205.00
Clearance
Corsa APEX Series MaxFlow 5 intakes feature Dynamic Flow Technology, allowing engineers to analyze air paths to the engine and determine the most efficient location for their kits. They feature steel or plastic tubes, silicone connectors, partial boxes designed for your vehicle, and high performance, 5-layer, oiled cotton-gauze air filters, which hold up to 20 percent more dirt than similar cone-shaped units. APEX Series intake systems are finished in a durable black wrinkle coat to stand the test of time and will flow 18 to 26 percent better than the factory system. These units install easily and include step-by-step instructions. For improved performance across the powerband, install Corsa APEX Series MaxFlow 5 intakes.
( 1 )
$403.99
$230.50
Get more performance from your Steeda air intake kit! These replacement air intake tubes are molded from high-quality ABS plastic or aluminum, with a smooth inside surface to increase the velocity of incoming air. They allow for colder air induction temperatures, resulting in less heat soak and lower air charge temperatures. The tubes are available in a variety of configurations for fitment on Ford vehicles from 2005 and up.
( 3 )
$144.95
—
$214.99
Airaid SynthaMax Jr. cold air intake kits target the restrictive elements of factory intake systems—the intake tube and the paper filter—to boost horsepower and mileage. These kits feature Airaid's dry SynthaMax Direct Fit Premium replacement filters and modular intake tubes. As with other Airaid intake systems, Airaid Jr. kits help straighten and improve clean airflow to the engine for added throttle response with increased horsepower and torque. Each cold air intake kit is custom-built to fit specific vehicles, is easy to install, and requires no drilling. SynthaMax filters are washable, reusable, and fully backed by the Airaid no-hassle lifetime warranty. Order the model recommended for your application. Features include: * Dry SynthaMax replacement filter—recommended for everyday street driving * Helps boost horsepower and acceleration * Replaces stock air filter and intake tubing while retaining stock air box * High-airflow premium filter * Low-restriction polyethylene intake tube * Easy to install with little mechanical knowledge
( 41 )
$249.99
—
$262.99
On Sale
Steeda boss intake upgrade kits are designed for converting your Steeda cold air intake for standard 5.0L Mustang to a Steeda Boss specific system for use with Boss intake manifolds. These Steeda boss intake upgrade kits include a larger 101mm replacement MAF housing, a larger intake tube specifically designed to be used with the Boss manifold, silicone sleeves, replacement hose clamps, and a template for modifying your head shield for the larger MAF housing. Due to the larger MAF size over your standard 5.0L GT cold air, specific tuning is required to use these parts. Tunes designed for the original MAF housing are not correct and must be updated. Benefits include: * Save money by converting your 5.0L GT cold air intake * Specifically designed for the Boss Mustang * Power increase across entire power band
Not Yet Reviewed
$234.95
$223.20
Gain increased horsepower and throttle response while protecting your engine from harmful particles and debris with Rough Country's cold air intake systems. They move the air filter away from the stuffy engine compartment so cooler air can be circulated into the engine for increased power and performance. Versions include those with and those without a pre-filter bag. Transform your vehicle into a legend with an assist from the Rough Country cold air intake best suited for your application. More product features and items include: * Improves airflow to engine for better combustion * Heat shield, intake tube, and reusable air filter * Hardware kit with detailed instructions that includes a BOM (Bill of Material) and torque specifications * Easy installation * High-quality construction
( 10 )
$129.95
—
$139.95
JLT Performance air box air intake kits consist of a roto-molded heat shield that fits around the charge pipe as well as seals to your hood. The increased airflow is designed to give you an increase of up to 1.5 psi of boost and 20 to 30 hp. Powerstack air filter, silicone coupler and clamps to provide you with everything you need for a perfect fit and finish after installation is compete.
Not Yet Reviewed
$229.00
aFe Magnum Force Super Stock Pro 5R air intake systems include Pro 5R filters with factory-oiled 5-layer, progressively finer, cotton gauze media. The progressive layering allows the filters to flow at high levels, even when dirty. They have been tested at 98.6 percent filtration efficiency and are washable and reusable for long life. The Super Stock systems with Silver Bullet throttle body spacers feature aFe's Serrated/Helix combination design that creates intake turbulence in the combustion chamber to increase horsepower, torque, and improved throttle response. The Serrated/Helix combination design also reduces the intake whistle of competitor's helix-only designs. The throttle body spacers are precision-machined from 6061 T-6 billet aluminum for light weight, high-strength, and a perfect fit and finish. The intake tubes are mandrel-bent with durable black powdercoating for increased airflow, improved volumetric efficiency, and better performance. The clamps, couplings, and hardware are included with these direct bolt-on kits, no cutting or drilling is required to provide a hassle-free installation.
( 1 )
$205.00
Maximize your engine's performance with Airaid SynthaMax CAD cold air intake kits. The cold air dam design seals directly to the hood and isolates engine heat away from your intake, allowing cooler air to run through the system. These cold air intake kits feature dual-layered SynthaMax filters, constructed using the finest 100 percent synthetic materials for unrivaled filtering efficiency. Servicing the filters is easy with oil-free maintenance—simply wash them in a mild household detergent and rinse. Airaid SynthaMax cold air intake kits are built with a hand-poured urethane body that won't crack, curl, or shrink. They use the stock air filter location, but add a boost with a huge air inlet that keeps more cold air flowing through the 360 degree filter. Hundreds of models are available for a wide range of vehicle applications. Maximize your horsepower, torque, and fuel efficiency with Airaid SynthaMax CAD cold air intake kits.
( 28 )
$246.99
Clearance
People who understand the importance of clean air moving into their vehicle's motor will enjoy Corsa APEX Series DryTech 3-D intakes. These free-flowing, high performance systems feature low-maintenance, oversized, DryTech 3-D synthetic media air filters with 18 to 26 percent improved flow over factory systems. The silicone connectors, filter isolator, and steel or plastic tubes with durable black wrinkle coating look great and install easily. With torque improvement numbers up near 11 and similar horsepower gains, it's easy to see that CORSA engineers did their homework. Corsa APEX Series DryTech 3-D intake kits include air ducts to maximize delivery and cross-sectional areas that remove restrictions.
( 5 )
$403.99
$230.50
Get more horsepower, better acceleration, and some extra cash in your pocket with a Summit Racing™ fuel injection performance kit. Most fuel injection performance kits feature a molded polyethylene intake tube that's designed to pull in more power-building cool air, and they come with a washable, reusable air filter that'll last the life of your vehicle. Best of all, Summit Racing™ fuel injection performance kits bolt on in place of your stock air box, so installation is easy.
( 94 )
$217.99
On Sale
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$209.95
$199.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
