Availability
Showing In Stock Items. Show All 54 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 47 )
$204.99
—
$379.99
$199.99
—
$339.99
On Sale
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 310 )
$62.99
—
$146.99
$50.39
—
$117.59
On Sale
Fluidyne heat exchangers and intercoolers are designed to keep your turbocharged or supercharged engine working at optimum levels. A cooler intake charge means more power from your engine. These units are made from aluminum and precision-welded for maximum efficiency and durability. The coolers use mounting tabs welded to the outer case for a simple installation. Order the size or model recommended for your application.
( 9 )
$467.00
—
$585.00
$396.95
—
$504.90
On Sale
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$219.95
—
$524.95
$175.96
—
$498.70
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 349 )
$230.95
$150.95
On Sale
Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.
( 4 )
$1,349.95
$877.95
On Sale
The K&N Black Series synthetic air filter elements feature oil-free DRYFLOW synthetic media. These low-restriction air filters are designed and manufactured for a wide variety of applications. Best of all, they can easily be washed by using K&N synthetic air filter cleaner (sold separately). The air must flow--and it will when you order the K&N Black Series DRYFLOW universal air filter elements best suited for your application!
( 22 )
$83.99
—
$125.99
$67.19
—
$100.79
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
K&N washable lifetime performance air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,400 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable--and are custom-designed to fit into your existing factory air box. Their drop-in design means that adding performance is simple. With most vehicles, you simply remove the disposable air filter and replace it with one of these K&N air filters. Find the model designed for your specific vehicle application.
( 1135 )
$52.99
—
$157.99
$42.39
—
$126.39
On Sale
Steeda's CNC-machined billet charge motion plates are superior upgrades for your Mustang. Steeda's charge motion plates are designed for a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence and improving airflow in the intake path for more horsepower and torque. Beautifully CNC-machined out of 6061-T6 aluminum for superior strength and light weight, Steeda's charge motion plates are available with tapped nitrous fitting holes for custom nitrous applications.
( 6 )
$349.95
$314.96
On Sale
These fuel pump block-off plates cover the opening left when you convert from a mechanical to an electric fuel pump. They're made from precision-cut steel that's highly polished and chrome plated. Gaskets are included.
( 28 )
$18.86
$12.26
On Sale
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$209.95
—
$719.95
$199.45
—
$647.96
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$280.90
$200.90
On Sale
K&N charge pipes are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes are engineered to reduce turbo charged air pressure loss, as well as dramatically increase air flow from the turbo through the intercooler. Constructed from lightweight aluminum with a durable gunmetal gray powder coated finish, the charge pipes are easy to install with commonly available tools and they are backed by K&N's 10-year/million-mile limited warranty.
( 2 )
$524.99
$474.99
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
On Sale
K&N heavy-duty replacement air filters are designed to provide exceptional filtration for your large turbo diesel engine, Class 6-8 over-the-road truck, agricultural and earth-moving equipment, and diesel RVs. These filters feature extra-tough, commercial-grade construction that withstands the extreme temperatures and pressures that can be present in large turbo diesel applications. The replacement filters are made with K&N's washable lofted hybrid air filtration media, reducing air restriction for more power and better engine efficiency with each cleaning. They do not require oiling and are easily cleaned with pressure washers and standard truck-washing equipment. K&N heavy-duty replacement air filters will keep going for up to 300,000 miles of high performance filtering! Order the universal model or the size and style designed for your vehicle application.
( 16 )
$83.99
$67.19
On Sale
AEM Induction Dryflow synthetic air filters are designed to deliver superior filtration efficiency and dust trapping over oil-coated, cotton gauze filters. They feature an easy-to-clean synthetic filter media that does not degrade from cleaning like cotton gauze-type filters. AEM Induction Dryflow synthetic air filters use a reinforced internal cage that is lighter and stronger than mesh types, a urethane body that will not shrink or crack like plastisol-based products, and an integrated velocity stack to increase the structural rigidity of the filler neck, all while improving airflow. They outflow most other brands with an impressive 99.4 percent filtration efficiency. These air filters are available in a variety of styles and sizes. Select the universal or vehicle-specific model preferred for your application.
( 153 )
$62.99
—
$83.99
$50.39
—
$67.19
On Sale
Clearance
ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. They feature either a high or low-impedance design to function accurately with your vehicle's ECU. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. More product features and notes: * Utilize a new low-mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency * Higher than stock flow rates may require reprogramming
( 219 )
$88.45
$57.49
On Sale
Steeda ProFlow blow-off valve adapters give your engine the sound to match its performance. These adapters will convert your factory re-circulation valve into a blow-off valve, giving it the iconic turbo sound! CNC-machined in-house from aerospace-grade 6061 billet aluminum, ProFlow BOV adapters are easy bolt-on parts that require no modification or tuning. On high-boost applications, they also help to prevent turbo surge, by allowing the pressure to vent to the atmosphere. The adapters are available for fitment on a variety of Ford Mustang and Fusion vehicles from 2015 and up. Benefits include: * Releases excess boost pressure to the atmosphere * Converts the factory re-circulation valve into a blow-off valve * CNC-machined 6061 billet aluminum * Bolt-on installation * No modification or tuning required
( 6 )
$99.95
$79.96
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
—
$799.95
On Sale
Are you experiencing poor engine efficiency? It could be that old factory paper element giving you problems. If that's the case, replace it with a SynthaMax Direct-Fit Premium air filter from Airaid! These synthetic filters can provide unrivaled filtration over the traditional factory paper filters. Plus, their oil-free maintenance makes them one of the easiest filters on the market to service. Just wash with a mild household detergent, rinse, and reinstall—you should be good to go! SynthaMax filters are available in a variety of styles, shapes, and sizes. Order the model recommended for your vehicle.
( 11 )
$73.99
—
$94.99
$59.19
—
$75.99
On Sale
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$899.95
$494.95
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 139 )
$424.95
$276.95
On Sale
Get connected with Holley EFI Coyote throttle body adapters! These adapter plates have a cast aluminum construction that's more durable for boosted applications, can be welded for modifications, and they are available in your choice of natural or black finishes. Choose the model for your application. Whether you're engine swapping your classic car or need to manage 4000 horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever!
Not Yet Reviewed
$81.19
—
$179.95
$44.65
—
$98.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
