Availability
Steeda "Stop the Hop" Street Starter kits help you eliminate wheel hop and stay within your budget. These kits contain the best three components to rid your Mustang of this menace, provide the fundamental foundation for ultimate traction and suspension compliance, and address the issues with factory IRS subframe mounting. Want to "Stop the Hop"? Get a Steeda Street Starter kit. Kit components: * IRS subframe alignment dowel kit -- Fills the factory bolt hole voids with CNC-machined Delrin® inserts that will square up the rear subframe to the chassis and limit side-to-side and front-to-back movement of the subframe that is present under hard acceleration and braking. * IRS subframe bushing support system -- Patented 8-piece kit designed and made in-house from billet 6061 aluminum and features stainless steel hardware. Fills all the factory voids in the IRS subframe mounting locations, preventing up-and-down movements of the subframe. * IRS subframe support braces -- Made in-house from chromoly steel, these 5-point braces with a simple bolt-in design support the factory subframe by directly tying it into the chassis at key mounting locations, utilizing factory mounting locations on the factory frame. They support the front factory mount and the lower control arm mount as well. Kit benefits: * Eliminate wheel hop while not increasing NVH * Eliminate subframe movement * Simple installation * Squares subframe to the chassis * No permanent modifications
Not Yet Reviewed
$599.95
Steeda Mustang 5.0L Coyote 304 stainless resonator delete crossover pipes are the best way to improve sound and increase performance at minimal cost—while losing up to 6.5 lbs. of weight. Available in X-pipe and H-pipe models, the design increases torque at lower RPM and delivers a traditional mean, deep muscle car exhaust tone. The layout enables you to retain the factory heatshield found on 2018 and newer GT models—without cutting and expanding the crossover pipe to retain the OE shields or chiseling off the OE shields. With mandrel-bent 2.5 in. diameter tubing, these crossover pipes easily install between the factory catalytic converters and the factory mufflers. They're also compatible with virtually all aftermarket axle-back exhaust kits. The 304 stainless steel tubing will not develop surface rust typical with 409 stainless, nor rust completely through like aluminized mild steel. The flush-fit exhaust clamps allow for shortening the pipe, if needed, and prevent exhaust leaks common with expanded end kits.
( 14 )
$294.95
—
$299.95
These Steeda Autosports Stop the Hop packs are designed to get wheel hop under control. They include Steeda's chromoly steel lower trailing arms and tubular upper third link. The packs will also improve straight line traction and corner exiting, providing quicker quarter-mile times and lower lap times at the road course. Available for stock height or lowered vehicles, Steeda Autosports Stop the Hop packs increase traction without changing ride quality.
( 1 )
$799.95
—
$1,249.95
When you push your Cobra to the limit in the corners, you may be applying enough force to twist the differential cover beyond its ability to flex. Repeatedly doing this causes the metal in the differential cover to separate, leaving you stranded. Steeda has come up with a solution to fix this problem. By attaching one of these Steeda differential braces, you will be adding strength and peace of mind to your differential cover. Steeda designed these cover braces with a hole to allow you to access the oil fill plug without having to remove the braces.
Not Yet Reviewed
$195.99
—
$549.95
All Steeda clutch cables features a stainless steel inner cable and a low-friction PTFE lining, along with a high-durometer bushing at the firewall for improved clutch response and cable life. Steeda manufactures these cables using the finest stainless steel to ensure performance and durability.
( 12 )
$44.95
—
$53.98
Stop missing third gear! Steeda's Tri-Ax shifters for the Tremec T5 and T45 transmissions will give you smooth and precise shifts. Steeda manufactures these shifters from CNC-machined billet aluminum to ensure performance and durability. The adjustable positive stops prevent overextending the shift lever, which also prevents costly transmission damage. Additional features include: * Offset-preload coil springs find third gear for you so you won't miss * 2-position adjustable height * Exclusive BootGuard (prevents damage to factory rubber inner boot) * Nickel plated pivot shaft won't rust or stain * Grade 8 and stainless steel hardware
( 17 )
$220.99
Are you looking for an easy way to adjust your clutch? Steeda's exclusive double hook design adjusters, along with the supplied firewall adjuster and cable, give you many adjustment choices. These Steeda kits are fully adjustable and allow an enthusiast to set the clutch travel to any preference with ease. A must with heavy-duty clutches, they're easy to install and simple to adjust. They come complete with hardware and instructions.
( 45 )
$134.96
—
$144.95
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$219.95
—
$524.95
Steeda's CNC-machined billet charge motion plates are superior upgrades for your Mustang. Steeda's charge motion plates are designed for a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence and improving airflow in the intake path for more horsepower and torque. Beautifully CNC-machined out of 6061-T6 aluminum for superior strength and light weight, Steeda's charge motion plates are available with tapped nitrous fitting holes for custom nitrous applications.
( 6 )
$349.95
Are you looking for an easy way to adjust your clutch? Steeda's firewall mounted clutch adjusters let you adjust your clutch engagement without having to crawl under the car. Just turn the adjuster knob on the firewall and you're done! Steeda designed these adjusters with a bigger adjustment range and a locking tab to keep the adjuster base from rotating, allowing you to make adjustments with one hand.
( 3 )
$75.98
Steeda has combined their subframe alignment kit and subframe bushing support system into a money-saving package. These components are useful for a variety of Ford Mustang applications from 2015 and up. Product benefits include: * IRS subframe bushing support system fills in all factory voids in order to eliminate movement of the IRS subframe * Utilizes all 4 factory mounting locations, which completely restricts shifting or rotation * Practically no added weight to the vehicle * Uses precision-machined Delrin® sleeves, which add no NVH and limit vibration to the vehicle * CNC-machined parts for a precision fit, unlike welded and stamped parts with slotted holes * Aligns and holds the subframe in place, in all 4 mounting locations * Easy installation, can be done in under 2 hours * More cost effective than others on the market to control wheel hop
( 2 )
$239.95
Steeda underdrive pulleys help you achieve more horsepower and torque—along with better gas mileage! These serpentine-style units reduce the parasitic accessory drag on your engine, slowing the speed on parts like the alternator, water pump, and crankshaft by about 25 percent. The well-built pulleys are manufactured from one-piece nodular iron, with special injection-molded rubber to limit vibrations and perform in high temperature areas. Most of Steeda's underdrive pulleys are designed for fitment in various Ford Mustang models. Order the kit tailored for your specific car, then enjoy the newfound power and fuel efficiency you've been losing with older stock components.
( 10 )
$261.99
—
$364.95
Steeda offers spherical control arm bushings for dozens of Ford vehicles from 1979 and up. These replacements are available in different styles and are a perfect addition to your racing suspension system. The bushings eliminate binding and allow super high-horsepower applications to retain their "stock type" suspension systems.
( 16 )
$133.99
—
$263.93
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$209.95
—
$719.95
Bump steer is undesirable because the suspension is steering your car instead of you. Correct your bump steer with one of these Steeda bump steer kits. These Steeda bump steer kits feature spherical rod ends with tapered shafts for a hassle-free installation that requires no drilling of the spindle for fit. Steeda manufactures these bump steer kits using the finest materials to ensure performance and durability.
( 22 )
$197.99
—
$249.95
Steeda billet vertical links feature a one-piece design accurate down to one-thousandth of an inch. Their design, along with 6061 aircraft-grade aluminum construction, delivers maximum strength—something welded control arms cannot. Steeda offers the billet links with larger polyurethane bushings, combined with billet steel sleeves and spacers, for more control through jounce and rebound, while still providing plenty of compliance, causing absolutely no suspension bind or an artificial spring rate. They are also available with CNC-machined Delrin® bushings, and billet steel bushing sleeves and spacers. Benefits of Steeda billet vertical links: * Reduces wheel hop * Will not flex under load * No increase in NVH * Installs easily, with basic hand tools * Delrin® bushings are recommended for drag racing and to eliminate wheel hop * Polyurethane bushings are recommended for handling applications (Street, Road Racing, AutoX)
( 2 )
$289.95
You can dial-in more camber with Steeda stainless steel camber plates. You can increase overall cornering capability, eliminate understeer, reduce tire wear, and have a more predictable, balanced vehicle on the street or track. These high-quality, stainless steel plates have Teflon®-lined bearings included, and Grade 10.9 hardware and nylock nuts for a smooth installation. Steeda continually finds ways to improve your suspension. Note: Camber plates do not include caster adjustment.
( 1 )
$367.99
Replace that weak plastic clutch quadrant with Steeda's super-strong billet aluminum double hook quadrants. Steeda's exclusive double hook design lets you use your choice of an adjustable clutch cable or a firewall mounted cable adjuster. Or, use both together for the ultimate in adjustment versatility.
( 6 )
$44.95
Remove that stock clunky clutch spring and improve your pedal feel with Steeda clutch assist springs. Late model Mustangs come from the factory with a 185 to 200 lbs./in. assist spring (depending on your model year). Many Pony owners find this compression rate gives them an uncomfortable pedal feel. Steeda engineers have devised a 35 to 95 lbs./in. assist spring, giving you just the right amount of spring, for a perfect clutch feel in your particular vehicle.
( 16 )
$24.95
—
$109.95
These Steeda Tri-Ax shift handles combine the quick shifts of a short handle with an easy-to-reach, ergonomic design. The exclusive 3-axis bend positions your hand perfectly for short, precise, and comfortable shifts. As a result of Steeda's never-ending search to provide the very best performance parts, all Tri-Ax handles are now forged from high-strength aluminum alloy. The new forging features a tapered thread boss and military spec radius-root threads to increase strength by over 70 percent. This high-strength, lightweight design reduces inertia for quicker and more precise shifts than are possible with bulky steel handles.
( 15 )
$59.95
Steeda's X2 ball joints improve the suspension geometry on lowered Mustangs by raising the spindle relative to the ball joint pivot-point. This raises the roll center back into the correct range for optimum handling, resulting in reduced body roll, quicker steering response, and improved overall front tire grip. Steeda's special ball joints reduce the need for oversized front sway bars and allow for the use of lower front spring rates, creating more grip over uneven pavement and better ride quality. Steeda ball joints are manufactured using the finest materials to ensure performance and durability.
( 7 )
$152.96
Stop differential movement and wheel hop with polyurethane differential bushings from Steeda. These Steeda bushings increase traction by keeping the differential properly located in the rear subframe.
( 5 )
$74.95
—
$249.95
Steeda has fielded numerous calls on the rear subframe being misaligned from the factory on the S550 Mustangs. Through hours of research and development, Steeda found that there was a large difference in bolt and hole size, making it possible for the subframe to be misaligned from the factory by up to 1/2 in. left to right. That research and development also lead to a solution--the Steeda subframe alignment kits. These kits are made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other to prevent corrosion. They are designed to slide into the subframe mounting holes to fill the extra space left from the factory. Steeda subframe alignment kits guarantee that your subframe will be bolted to the same location every time it's lowered and eliminate the need for any unnecessary alignments ever again.
( 1 )
$75.11
Steeda Sport suspension springs are the foundation of good handling! The company's experience in high performance street and racing suspension systems is second to none—put that expertise to work for you. These springs are custom-made to strict specifications for fitment on a wide range of vehicles, including Ford Mustang, Fusion, and Focus; as well as Lincoln and Mercury models. And depending on the springs you order, you can lower your stance by up to 2 in. Steeda uses high-quality steel wire to ensure performance and durability, with a black or blue powdercoat finish to resist the elements. Enhance your ride quality with a set of durable, attractive Sport suspension springs from Steeda!
( 16 )
$304.95
—
$499.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
