Availability
Showing In Stock Items. Show All 25 Items.
On Sale
BD Diesel steering stabilizer bars are also known as "The Wobble Stopper!" These steel support brackets will eliminate steering wander and wobble caused by excessive shaft play in the steering box of your rig. BD Diesel has designed these kits for easy, bolt-in installation—in about an hour you'll gain a more positive steering feel. Order the model tailored for fitment on your vehicle application. BD Diesel steering stabilizer bars feature: * Steel construction finished with black or silver vein powdercoat to resist corrosion * Virtually eliminates frame flex at the steering box mounting point * Greaseable, high-quality bearing for reliable operation * High-strength mounting hardware * For gas and diesel vehicles
( 30 )
$258.95
—
$269.95
$233.06
—
$242.96
On Sale
A bad chassis shake could mean it's time to replace your king pins. Yukon Gear & Axle complete repair kits enable you to rebuild your axle. Quality replacement parts typically included in these kits are a king pin, bushing, seals, bearings, cap, gasket, and hardware. Each kit rebuilds one side only, so you would need two kits for a complete repair. Restore your suspension and steering system—and enhance your truck's performance—with quality Yukon Gear & Axle parts.
( 4 )
$221.89
$188.61
On Sale
Superlift dropped pitman arms help to keep your lifted truck in line. They help to reduce bump-steer and some of the additional tie rod angle created by the lift. These steel arms are available for a variety of lifted height applications.
( 40 )
$119.99
$101.99
On Sale
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$549.95
$493.95
On Sale
The late-model factory power steering pump on the Mopar Gen III Hemi engines has too much pressure for the steering box on most older muscle cars and trucks, so Holley developed a low pressure power steering pump for Gen III Hemi swaps. These special Saginaw Type II low pressure power steering pumps produce the proper pressure, and the 6-rib billet aluminum pulley is sized to operate the pump at the proper speed when used with the existing drive system on Gen III Hemi engines. The special hardline adapter moves the power steering hose connection to a more accessible location for an easy installation and maintenance. Features and benefits: * Low-pressure power steering pump it—use with factory low-pressure steering boxes on muscle cars and trucks with Gen III Hemi engine * Works with factory "car style" accessory drive system and fits 2003-2008 5.7L and 2005-2010 6.1L Gen III Hemi engines * Also fits some 2009-2013 5.7L and 2011-2013 6.4L with 4.34-inch belt spacing * Prevents damage to steering box on older vehicles * Billet aluminum mount with black anodized finish bolts to existing tapped holes on the left side cylinder head of Gen III Hemi engines * 6-rib billet aluminum pulley with black anodized finish sized for proper pump speed * Power steering pump assembly includes a plastic reservoir * Special hardline moves -6 AN hose connection to a more accessible location
( 1 )
$534.95
$480.95
On Sale
Superlift dual steering stabilizer kits are essentially shock absorbers for your steering system. They allow unrestricted gradual movement, but resist sudden shock, improving driver comfort and steering ability. These damper kits include two cylinders and mounting hardware for vehicles that are not factory equipped with a stabilizer. They're great for rigs that see extreme duty or have extra-large tires. Numerous models are available, with specific fitment requirements. Click the product application tabs to find the steering damper best suited for your truck or SUV.
( 12 )
$399.99
$339.99
On Sale
These BD Diesel steering box support kit sector shaft bearings are designed to install over the sector shaft. They include a Zerk fitting to keep them greased and a set screw for secure attachment.
( 2 )
$99.95
$89.96
On Sale
Yukon Gear & Axle king pins will get you through your rebuild successfully. Available for hundreds of vehicle and engine applications, king pins are the main pivot in the steering mechanism of a vehicle. These forged steel parts are just a small sample of the quality replacements offered from Yukon. Maintain your axles with the strength of Yukon king pins.
( 5 )
$77.89
$66.21
On Sale
Maintain proper suspension and steering by replacing your tired ball joints with a fresh set from Crown Automotive. All ball joints wear down after time. The harder you drive your Jeep, the faster the ball joints will wear. Maybe your Jeep is making a clunking sound or your steering feels tight in spots. You can have confidence in long-lasting dependability and performance with quality replacement parts from Crown.
( 7 )
$6.99
—
$55.99
$6.29
—
$50.39
On Sale
Yukon Gear & Axle ball joints are top-quality, reliable small parts to complete your suspension job. They offer individual lower and upper ball joints, as well as kits with upper and lower to service one side of your vehicle.
( 4 )
$115.99
—
$226.99
$98.59
—
$192.94
On Sale
Whiteline camber bolt kits mean no slip! These front and rear camber adjusting kits offer a friction lock design with a positive toothed lockwasher. They are simple to adjust and will lock time after time without slipping.
( 1 )
$52.88
$37.02
On Sale
Steering knuckles are the core of a vehicle's front axle. They attach to the suspension components, contain the wheel hub or spindle, hold the front wheel on the car, and let you change direction. Crown Automotive steering knuckles are constructed of cast iron for durability and lasting service. They are available individually or in a set with both left and right replacement knuckles.
( 11 )
$109.99
—
$123.99
$98.99
—
$111.59
On Sale
Yukon Gear & Axle king pin replacement components range from knuckle bushings and spring pin caps, to seals, bearings, hardware and more. All of Yukon's parts and accessories are quality-tested and engineered for maximum durability and reliability for street and off-road applications. Order the model recommended to service your king pin.
( 4 )
$8.99
—
$16.99
$7.64
—
$14.44
On Sale
Crown Automotive steering box replacement parts are made to OE specs to fit your vehicle. There are many pieces available, from gaskets and seals, to bearings, brackets, and hardware, as well as worm shafts and many other steering components. Tighten up your steering and get back on the road or trail with confidence.
( 2 )
$12.99
—
$53.99
$11.69
—
$48.59
On Sale
Replace your idler arms and sprockets with sturdy steel Crown Automotive idler arms. These components generally wear because of the pivot function built into them. When yours are damaged or malfunctioning, you may notice some signs of road wandering or play in the wheel. Restore smooth, safe handling to your vehicle with OE-style parts from Crown for extended vibration-absorbing performance.
Not Yet Reviewed
$17.99
$16.19
On Sale
Fix your power steering leak with Crown Automotive power steering reservoir caps. These direct-fit parts are needed when your caps are cracked and spraying fluid back into your engine compartment. Don't waste any more time or fluid--restore your steering system and stop the noise and play in your steering wheel.
( 1 )
$7.99
$7.19
On Sale
Steering systems on 4WD vehicles take a great deal of abuse, whether driving through a snow storm or a rock garden. When the steering gets a bit sloppy, count on Crown Automotive tie rod ends to get your vehicle back on the straight and narrow. Constructed of strong metal materials, these OE-style ends are correctly threaded to match the originals, with a rubber boot to hold in grease. The failure of even one tie rod end can cause a dangerous driving situation. Consider quality replacements from Crown Automotive.
( 4 )
$5.99
—
$39.99
$5.39
—
$35.99
On Sale
Whiteline camber correction control arm bushing kits provide the ability to fine tune camber settings for optimum tire contact resulting in improved vehicle handling and increased tire life. These camber correction control arm bushing kits include low compliance synthetic elastomer bushings, which help maintain preferred alignment settings, as well as providing enhanced steering response. Order the kit designed for your application. Additional features, specs, and benefits: * Engineered to alter/optimize camber alignment to compensate for body roll, body distortion and tire roll when cornering * The latest in material formulation technology of bushings boasts resistance to oil, grease, ozone, and weathering * Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life * Internal grease reservoirs provide continual self-lubrication for optimum friction management * Provides a window of adjustment to rectify or optimize a vehicles wheel alignment * Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come * Installation guide included providing detailed instructions on how to install your new purchase
( 1 )
$141.88
$99.32
On Sale
If the weak link in your rear alignment is bent, Crown Automotive rear camber links are the replacement components to improve the dynamics of your car. You'll experience less tire wear, along with improved handling and rear traction.
( 1 )
$28.99
—
$39.99
$26.09
—
$35.99
On Sale
Whiteline camber/caster correction control arm bushings are designed to increase positive caster and provide camber adjustment. The unique design and material leads directly to improved articulation, performance, and vibration and noise dampening. Whiteline advanced polyurethane bushings maximize your vehicle's potential whether it's a daily driver, street performer, or track star. Order the bushings designed for your application needs.
Not Yet Reviewed
$194.88
$136.42
On Sale
Whiteline anti-lift/caster correction control arm bushings are designed to add 0.5 degree static positive caster to both front wheels, while changing the nature of front anti-dive and lift. The result is a more compliant suspension during braking and acceleration, reduced understeer with increased front-end grip, and sharper, more precise steering. Whiteline's advanced synthetic elastomer bushing characteristics will ensure superior elasticity, memory, and outright durability for all forms of driving applications and are resistant to oil, grease, ozone, and weathering. Choose the Whiteline anti-lift/caster correction control arm bushings designed for your application needs.
Not Yet Reviewed
$88.88
$62.22
On Sale
When your vehicle becomes hard to steer, Crown Automotive power steering pumps will make it easier. Power steering is great ... until the pump fails. And, unless you have the arm muscles of a bodybuilder, maneuvering just became a giant hassle. Fortunately, Crown has a great variety of power steering pumps for you to choose from to get your vehicle handling the way it used to.
( 3 )
$105.99
—
$135.99
$95.39
—
$122.39
On Sale
Fortify a crucial point of your steering component with Crown Automotive tie rod sleeves. They are constructed from sturdy materials and built with the original specifications to fit like a glove. Replace your worn-out parts and gain peace of mind by reinforcing the rigidity of your steering linkage with Crown Automotive tie rod sleeves.
( 1 )
$15.99
$14.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
