Availability
OER brake light switches are reproductions with an original equipment fit. Activated by the brake pedal arm, these switches cause the rear lamps to illuminate when you apply the brakes. Keep your stopping lights operational with the correct replacement switches from OER, available for countless applications spanning a half-century.
( 9 )
$6.99
OER power steering pump stud and bolt kits are replacement hardware for Saginaw power steering pumps. The sets are available un-plated or chrome plated to use with painted or chromed reservoirs. OER stud and bolt kits will include two studs and one bolt. They're available for applications from the 1930s thru the 1970s.
( 9 )
$9.99
OER coolant temperature sending units are direct replacements that will restore reliable readings. Offering a proper fit for a hassle-free install, these sensors will efficiently relay electrical signals to your gauges to display accurate engine coolant temperature. OER coolant temperature sending units will ensure your gauge functions properly.
( 5 )
$10.99
Install the sending unit on your vehicle with OER Authorized fuel sender lock rings with gasket sets. These reproduction replacements provide an original fit for leak-free performance. The lock rings are manufactured from zinc coated steel for corrosion resistance and include a rubber O-ring gasket. OER Authorized products meet or exceed stringent OER quality control standards and are sanctioned and approved by OER providing.
( 3 )
$9.99
OER fuel tank sending unit ground straps attach near the short fuel hose that joins the fuel tank sender line and the long fuel line. These quality reproductions are made from steel, just like the originals. Prevent intermittent fuel gauge operation with OER sending unit ground straps, available for hundreds of applications from the 1960s and '70s.
( 3 )
$11.99
Is that original headlamp dimmer switch causing you all sorts of lighting troubles? If so, replace it with one of these OER headlamp dimmer switches. Improved tooling makes these switches more desirable than original equipment units. Replace that old and worn out switch with one of these OER headlamp dimmer switches.
( 14 )
$10.99
OER radiator overflow hoses are perfect service replacements. Manufactured from quality rubber, these thin-walled hoses have a maximum pressure of 50 psi with a temperature range of -40 degrees F to 257 degrees F. They can be cut to the desired length, and may be used for other applications as well.
( 6 )
$8.99
OER rubber panel plugs keep moisture and air from entering your trunk, tailgate, floor pans, and more. These versatile plugs are designed to fit many models from the 1960s and '70s. They're available in a variety of sizes and styles. You can count on OER for even the smallest details that are important to your restoration.
( 5 )
$4.99
These OER clutch linkage bell crank linkage spring clips are designed to replace damaged, worn-out, or missing factory clips. They are manufactured from quality materials and are built to stock specifications, ensuring a perfect fit.
( 1 )
$4.99
OER window handle plastic washer plates are used to help protect your interior door panel from getting all scuffed up each time you roll your window up or down. Each plastic washer plate installs under the window handle crank, between the window crank arm and the door panel, to keep your vehicle's interior door panels well-protected, crank after crank. They're available to fit various applications to best suit your restoration needs.
( 8 )
$5.99
OER bumper bolts are designed to replace your original fasteners and securely attach your bumper. They feature the correct polished or chrome plated head and include matching nuts for a complete installation.
( 1 )
$2.99
Replace your old factory original door lock knobs with new ones from OER. They are manufactured from premium materials and offered in several different styles and finishes. Renew the interior look of your classic vehicle with parts featured by OER.
( 7 )
$9.99
These OER dome lamp lenses are excellent reproductions of the original dome lamp lenses in your ride. They feature the correct styling and design to provide a perfect fit.
( 26 )
$7.99
OER light bulb sockets assist with illumination of your classic. Manufactured to take the place of your original's fit, function, and style, these sockets are offered for side markers, parking lamps, turn signals, interior dome lights, and more. Whether you are repairing, replacing, or restoring, their selection of quality reproductions can make your vehicle brighter, inside and out.
( 1 )
$8.99
OER convertible power top motor mounting grommets are reproductions of the original rubber mounting/insulation grommet used on various models with the optional power tops. They install on the pump assembly and secure it to the vehicle, creating a damper for noise and vibration while the pump is in operation. These grommets are made from high-quality NBR material which is resistant to oils and fuels. Order the model designed for your application.
( 1 )
$4.99
OER headlight bezel hardware are reproductions of the originals designed to attach headlamp bezels on your classic. Available for several different applications, each hardware set will include the screws, nuts, or retainers to secure your headlamp bezel.
Not Yet Reviewed
$5.99
Button up your wheel wells with assistance from OER. Their wheel well molding screw sets contain quality chrome pan head screws to secure your wheel opening moldings. This reproduction hardware is available in different styles and quantities, providing the right fit and appearance for a variety of classic vehicles from the 1960s and '70s.
( 5 )
$9.99
OER sunvisor rod end-caps are high-quality replacements designed to deliver show-quality results. They're constructed of superior materials and crafted to exact specifications for a perfect fit and finish. Order the sunvisor rod end-caps recommended for your classic car application.
( 2 )
$6.99
OER window crank screws give your handles an authentic appearance. These special screws are machined to exact specifications and feature an original-style chrome finish, as well as a correct head design and threads. Direct replacements for many vehicles from the 1960s and '70s, OER window crank screws deliver the fit and finish to keep your restoration a classic.
( 1 )
$1.99
OER door lock striker bolt shims are reproductions of the originals. They're manufactured from die-stamped steel and finished in a clear zinc coating. These shims are used to correctly position the door striker bolt for proper alignment with the door latch assembly. OER door lock striker bolt shims can be used on just about any door striker and are available in a variety of thicknesses.
( 1 )
$6.99
OER remote mirror mounting screws are used to mount your mirror to the bracket. These chrome screws are quality reproductions of the original mounting screws for your vehicle.
Not Yet Reviewed
$9.99
Keep your body panels protected from your hood with these OER hood bump stoppers. They are manufactured from extra-thick, durable rubber for maximum protection. The stoppers are built to factory specifications and install in the stock location for a direct fit.
( 28 )
$4.99
Fit your upper, lower, and side back glass moldings with OER rear glass molding clips. These reproduction clips are designed for a perfect fit when you're installing your rear window moldings. OER clips are available for several applications. Secure your rear or back glass with correct-fitting glass molding clips from OER.
( 6 )
$1.99
Are you installing a new window molding set or just need to replace a couple of missing window molding clips? Regardless, these OER window molding clips are just what you need to keep all of your window moldings securely in place. Available individually and in sets, these OER window molding clips will help you get your classic ride looking factory-fresh again.
( 5 )
$1.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
