Availability
Showing In Stock Items. Show All 23 Items.
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 286 )
$12.99
—
$20.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 162 )
$16.99
—
$19.99
If you liked the results that you used to get with Vandervell bearings--especially their higher conformability--then you should love Clevite V-Series rod bearings, which basically duplicate the Vandervell items. Built on un-plated, hardened-steel backings for better dimensional accuracy and bore contact, they have low-to-medium eccentricity. The biggest difference between V-Series and other Clevite 77 bearings is their lead-indium surface alloy, which gives them that extra conformability. V-Series bearings are available in narrower versions to provide greater crank-fillet clearance, as well as in extra-clearance variations that provide an additional 0.001 or 0.002 in. of clearance.
( 5 )
$20.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$15.99
—
$20.99
Clevite thrust washer bearings are available for a variety of engine configurations and engines to suit your vehicle's needs. They are manufactured from quality materials and install in the factory location with no modifications.
( 1 )
$12.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 184 )
$13.99
Replace worn-out or damaged bearings with these Sealed Power thrust washer bearings. They are built from quality materials and feature factory tolerances for a direct fit installation.
Not Yet Reviewed
$10.99
Need bearings? See the specialists at King. Their CA-Series rod bearings are a bi-metal silicon aluminum material offering high fatigue strength and a superior temperature threshold. When it comes to bearings, there is only one King Engine Bearings.
( 4 )
$10.99
—
$11.99
Mopar Replacement connecting rod bearings are direct-fit OEM replacements that will provide the matching fit and function of your originals. Worn bearings can cause poor operation and unwanted noises. For the most dependable, reliable service of your Chrysler, Dodge, or Jeep vehicle, choose genuine Mopar crankshaft main bearings to restore performance.
Not Yet Reviewed
$24.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 82 )
$14.99
—
$19.50
Clearance
ACL direct replacement rod bearing sets are affordable, high-quality bearings expertly made from premium materials and engineered to match your exact requirements. They are offered in the Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. Select the set desired for your build. ACL Aluglide bi-metal bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds.
( 1 )
$31.99
$12.50
—
$17.50
Clearance
Mopar Replacement crankshaft main bearings are direct-fit OEM replacements that will provide the matching fit and function of your originals. Worn bearings cause poor operation and unwanted noises. For the most dependable and reliable service of your Chrysler, Dodge, or Jeep vehicle, you want genuine Mopar engine crankshaft main bearings to restore proper performance. Order the part application designed for your Mopar vehicle.
Not Yet Reviewed
$17.99
—
$26.99
$10.50
—
$14.50
Crown Automotive crankshaft thrust washers are available for a variety of engines and Mopar applications. Machined from the high-quality steel, these economical direct replacements install in factory locations with no modification. Sold individually or in a set, order the model recommended for your vehicle.
Not Yet Reviewed
$10.99
—
$14.99
Clearance
ACL direct replacement main bearing sets include their Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. ACL Aluglide bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds. Affordable, high-quality engine bearings expertly made from premium materials and engineered to match your exact requirements, ACL main bearing sets. Select the set designed for your engine.
( 1 )
$24.99
—
$36.99
$12.50
—
$17.50
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 28 )
$13.99
—
$21.99
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 27 )
$12.99
Clearance
These Sealed Power balance shaft bearings feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage. They are available for today's most popular fuel injected style engines.
( 1 )
$18.99
$14.50
King XA-Series main bearings feature a strengthened copper-based material, with higher tin content for medium and high-load engines. Their tri-metal construction features a steel backing, an intermediate lead bronze layer, and a nickel barrier with Babbitt overlay. Today's performance engines require components that can withstand ever greater loads and stresses. King Bearings has the right set for your application.
Not Yet Reviewed
$17.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
