Availability
Showing In Stock Items. Show All 134 Items.
On Sale
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$94.00
$75.20
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$70.98
Clearance
Mopar and Hemi mean a lot to car guys--they embody power and classic design. Summit Racing™ Mopar Hemi coil-on-plug ignition coils are a great way to match well-engineered engines with the pure power of plasma. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind to provide 20 percent more voltage and 30 percent more spark energy (mj) over stock. All this comes from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you are running a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn!
( 14 )
$59.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 81 )
$50.99
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$112.95
$70.65
—
$84.71
Summit Bucks
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 205 )
$88.99
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 649 )
$79.55
—
$107.65
$71.60
—
$96.88
If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a non-current limiting ignition (originally equipped with a ballast resistor) you will need one of these MSD factory ignition module tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.
( 17 )
$99.95
On Sale
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$59.14
Mopar Replacement oxygen sensors offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. When you need to replace and you want the proper fit, correct calibration, and reliable operation choose genuine Mopar Replacement oxygen sensors. Order the model designed for your specific vehicle application.
( 1 )
$72.99
—
$81.99
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
Certain multiple displacement solenoids (MDS) have plastic housings and low-grade O-rings that fail in extreme heat. Dorman engine cylinder deactivation solenoids upgrade the plastic housing to aluminum and add premium, compression-tested O-rings to prevent premature failures. They include a new gasket and mounting bolt for a complete repair. Dorman engine multiple displacement system solenoids are application specific—made to directly replace the original MDS on certain Chrysler, Dodge, and Jeep applications from 2005-09.
( 3 )
$68.99
—
$94.95
On Sale
ACCEL Mopar Remote Super Coil and harness combos provide increased performance for Dodge trucks and Jeeps that utilize the light gray Yazaki coil connector. You get quicker starts, improved idle, crisp throttle response, and higher top-end power. These coil and harness combos are compatible with Mopar J-TEC computer-controlled ignitions, and require no modifications for installation.
( 31 )
$117.37
$88.03
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 92 )
$50.99
—
$53.99
On Sale
Taylor High-Energy spark plug wire sets are an outstanding choice for replacement or a performance upgrade. These wires feature heat-resistant silicone jackets and boots, double spring-locking spark plug terminals for better gripping, an 8mm size for high-compression engines, and a resistor core to suppress radio interference. The spark plug wires can withstand temperatures of up to 500 degrees F—and they're available in a variety of options for distributor terminal and boot ends, assembled or not, and universal or direct-fit for specific applications.
( 222 )
$62.90
$56.61
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 202 )
$89.99
—
$93.99
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$61.99
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$79.99
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 803 )
$86.95
—
$87.15
$65.21
—
$78.45
Mopar Replacement air temperature sensors are genuine OE replacements designed to monitor the temperature of the air entering the engine—so that the proper air/fuel mixture can be maintained. These sensors are engineered from high-quality materials to provide you with reliable, long service with the right fit, function for your vehicle application to repair and/or restore performance and safety, just as it should be. For genuine OE replacement parts for your Mopar, choose Mopar Replacement.
( 5 )
$85.99
Mopar Replacement MAP sensors are genuine OE replacements. That means your Chrysler, Dodge, Plymouth, Ram, Jeep, or Mitsubishi will receive the perfect part to repair and/or restore performance and safety, just as it should be. The manifold absolute pressure sensors are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Maintain accurate readings and smooth engine performance by choosing the Mopar MAP sensor designed for your vehicle application.
( 1 )
$98.99
On Sale
Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.
( 444 )
$62.90
$56.61
Standard Motor is the premier professional engine management brand in the automotive aftermarket. They lead the way in vehicle coverage for engine cylinder deactivation solenoids. Order the model recommended for your application. Product features: * Direct-fit OE replacement ensures proper fit, form, and function—which leads to a trouble-free installation * Designed and manufactured to stringent quality standards at a certified facility, so you can install with confidence * Premium components and durable materials can withstand harsh engine conditions, increasing lifespan * Solenoids undergo extensive testing and validation for proper performance and peak reliability
Not Yet Reviewed
$57.99
On Sale
Edge cast aluminum pillar display mounts offer a more permanent and vehicle-specific mount for their CTS3 based devices. The mounts are specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. They provide a sturdy mounting location to replace Edge's standard suction cup style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and can be painted for a custom finish, if desired. Order the model recommended for your vehicle. Additional details: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual T-slot mount included * Works with all CTS3 devices, including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
( 3 )
$61.89
—
$68.05
$55.75
—
$61.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
