Availability
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 106 )
$9.99
—
$83.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$38.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 260 )
$15.95
Dorman offers a broad spectrum of parts for automotive repair and maintenance, including brake hose locks. These brake hydraulic hose lock clips are constructed from quality material for lasting durability against harsh road and weather conditions. They are designed for use in effectively securing brake hose to the vehicle. Drive with confidence with Dorman brake hardware components.
( 13 )
$6.99
Fine Lines brake line kits come in two different materials; steel and stainless steel, as well as in many different pre-bent line configurations to fit most makes and models. Stainless steel is stronger and more durable than rubber, and will provide a firmer, more comforting feeling when you step on the brake. The pre-bent tubing cuts down on your installation time, allowing you to get your vehicle back on the road quicker. Kits are available for the front or rear, or in complete kits with both. Restore your brake responsiveness with a selection from Fine Lines brake line kits.
( 43 )
$39.27
—
$182.76
Russell street legal brake line kits will improve your braking performance for competition or everyday driving. Replacing spongy or brittle factory rubber brake lines with Russell hoses will reduce hose expansion for firmer, more responsive braking. These kits feature stainless steel braised hose with zinc-plated fittings—and are factory assembled for convenient bolt-on installation. The components meet strict DOT requirements for street-driven vehicles. Russell brake line kits are available for a wide range of specific domestic, import, truck, and SUV applications.
( 488 )
$113.95
—
$173.95
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$17.99
—
$97.99
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$12.99
Skyjacker stainless steel braided brake hoses have been tried and tested in some of the most severe conditions that 4-wheeling has to offer, in virtually every corner of the world. They go the extra mile. They're custom-made to reach all the way down for a snug fit on your Skyjacker lifted truck or SUV. They are proven in their quality of engineering, workmanship, and finish, and are DOT-certified.
( 132 )
$69.39
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 164 )
$16.99
Continental heater hose E-Z coils make creating your very own molded hoses a breeze. These E-Z coils maintain a consistent I.D. through a 90 degree bend, eliminating the need for a custom-molded hose. When it comes to saving time and money, Continental has you covered with their E-Z coils.
( 5 )
$12.99
BDS Suspension braided stainless steel brake hose sets improve the safety of your truck, SUV, or Jeep. Specially designed for lifted vehicles and available for front or rear, these brake lines are built with stainless steel braided hose and feature a Kevlar® liner for improved brake pedal feel. BDS Suspension braided stainless steel brake lines use a one-piece crimped design with four levels of protection, allowing these brake lines to take abuse on and off-road. Their PTFE inner core is approved for use with all brake fluids including DOT 5 silicone. BDS brake lines are flexible, resist kinking better than stock lines, and comply DOT Federal Regulations. Select the kit designed for your vehicle.
Not Yet Reviewed
$150.95
Hayden Automotive offers a full line of accessories for your transmission coolers. These rubber transmission cooler hoses are available in a variety of sizes to suit your needs.
( 30 )
$7.99
Bleed your brake system with these Dorman brake bleeder screws. They're designed to mount into your OEM caliper and will clear all stock components. Available for passenger cars, trucks, and SUVs, the Dorman brake bleeder screws allow for the fast, easy bleeding of your brake system.
( 12 )
$3.99
—
$4.99
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 59 )
$26.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 443 )
$16.99
—
$58.99
Replace your damaged OEM bypass hoses with Dayco molded bypass hoses! Designed using knitted reinforcement and all-synthetic EPDM construction, they provide the high strength and resistance to oil, salt, mud, debris, ozone, coolants, and extreme temperature variations that are required for OEM replacement hoses. Their inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses.
( 12 )
$9.99
On Sale
Anytime you replace your brake hose, install new Crown Automotive brake caliper crush washers to ensure a tight, leak-free seal. The accessories you use to install your brake lines are just as important as the hose itself. Crown Automotive brake hose gaskets are quality replacement hardware designed to get the job done right the first time.
( 2 )
$1.99
—
$3.99
$1.79
—
$3.59
Replacing damaged or corroded cooler lines with Dorman automatic transmission cooler lines takes you a long way in protecting your transmission. Their lines' leak-resistant design prevents the common, high-stakes problem of transmission fluid loss. Plus, the robust construction of Dorman auto transmission oil cooler hose assemblies readily defends against possible damage from road debris and corrosion. Features include: * Includes all hardware needed for a complete repair (where applicable) * Materials used in construction have been upgraded from steel and/or rubber to corrosion-resistant aluminum (where applicable) * Direct replacement for ease of installation * Rigorous quality control measures ensure each line conforms to product standards
( 76 )
$30.99
—
$186.95
Bleeding your brakes is critical in keeping your ride in top performance. Dorman brake bleeder screw assortments allow you to do just that. They are made of high-quality materials and are a sure way to make bleeding your brakes a breeze. Screw assortments contain two of each of the following sizes: * 1/4-28 in. x 15/16 in. * 5/16-24 in. x 1 in. * 3/8-24 in. x 1 1/4 in. * M10-1.0 x 35mm * M10-1.5 x 30mm
( 4 )
$11.99
Continental heater hoses are original equipment molded heater hoses for popular applications. The tube in Continental's universal or pre-curved molded heater hoses is made with Versigard rubber--a compound that's highly resistant to heat, oil, and weather. The patented knit reinforcement is made with Tylanar fabric--a material that meets or exceeds the requirements of SAE J20R3, D1. Additional features include: * Designed for those vehicles requiring multiple or severe bends * Original configurations to ensure a perfect fit * Fits popular applications * Rugged construction
( 26 )
$12.99
—
$15.99
Brake bleeding has always been an inconvenient and messy job--until now. Earl's Solo-Bleed bleeder screws will solve both problems. As direct replacements for the OEM bleeder screws, Solo-Bleeds allow you to safely bleed your brakes by yourself without the mess, and without the chance of air inclusion. They come available in many different sizes to fit virtually any vehicle.
( 22 )
$46.61
Transmission oil cooler fittings are used in the transmission cooler circuit to connect components and lines. All products from Four Seasons are engineered and tested to provide years of trouble free operation. Backed by over 50 years of car parts experience, fix it once and fix it right with Four Seasons.
( 4 )
$4.99
Summit Bucks
ACDelco offers a wide variety of hoses to get your vehicle back on the road. Whether you need to replace fuel, coolant, oil, or vacuum hoses, you can count on ACDelco Gold parts to deliver OE fit and performance. Order the replacement hoses recommended for your application.
( 1 )
$70.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
