Availability
Showing In Stock Items. Show All 84 Items.
Clearance
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 83 )
$34.99
—
$50.99
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 38 )
$319.00
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$23.50
—
$55.99
Mopar Replacement air temperature sensors are genuine OE replacements designed to monitor the temperature of the air entering the engine—so that the proper air/fuel mixture can be maintained. These sensors are engineered from high-quality materials to provide you with reliable, long service with the right fit, function for your vehicle application to repair and/or restore performance and safety, just as it should be. For genuine OE replacement parts for your Mopar, choose Mopar Replacement.
( 5 )
$46.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$36.99
—
$41.99
MAP (Manifold Absolute Pressure) sensors which fail may cause the engine to have a too rich or lean fuel mixture condition. Crown Automotive MAP sensors restore data transmission to regulate timing control and fuel delivery. They convert engine vacuum/manifold pressure to an electrical signal so that the computer knows how much load the engine is under. This data is the basis for calculating values which keep your vehicle in top running order.
( 4 )
$40.99
Spicer Drivetrain ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of your ABS system, and pulses at low-speed can be frustrating and dangerous. Spicer tone rings will maintain your vehicle's sensor readings and allow your ABS system to function at its peak.
( 1 )
$52.99
—
$69.99
Mopar Replacement oil pressure sending units are genuine OE-replacements. That means your Chrysler, Dodge, Plymouth, Ram, Jeep—and some VWs—will receive the perfect part to repair and/or restore performance and safety, just as it should be. These sending units are made from high-quality materials to provide reliable, long service with the right fit, function, and value. Get accurate, viewable reads with the Mopar oil pressure sending unit designed for your vehicle application.
( 5 )
$114.99
ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.
( 2 )
$73.99
—
$176.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$76.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$31.99
—
$99.87
Are you experiencing hard starts, stalling issues, rough idle, or hearing a slight pinging within your engine? Don't panic. It may be related to a bad throttle position sensor. Delphi throttle position sensors are designed to sense throttle movement and change of position. They also regulate various engine and vehicle operations, including spark timing, air and fuel ratio, torque converter lockup, air conditioning, and idle speeds. With that said, throttle position sensors are an important component, and if your existing sensor seems to have gone bad, just swap it out for a new one from Delphi.
( 13 )
$39.99
—
$49.99
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$63.99
—
$68.99
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$36.99
—
$74.99
Dorman has you covered on all of your vehicle speed sensor needs. The speedometer gauge on your dashboard is getting its data from somewhere--and these are the units. Dorman takes pride in having produced high-quality OE replacement parts with state-of-the-art equipment since 1918. Take advantage of having access to an industry-leading brand originally intended only for dealers. Dorman vehicle speed sensors are available for many makes and models of cars and trucks. Match your vehicle specs with the sensor that'll get you back up to speed!
( 7 )
$23.99
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 100 )
$12.99
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 56 )
$289.75
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$54.99
When you need an air charge temperature sensor, Standard Motor Products offers engine management for your vehicle. Their OE replacements offer quality and the right fit to keep you moving. Today's autos are highly computer-controlled, so it's important that the right data is received to maintain optimum engine performance. Standard manufactures critical components, like air temperature sensors, that your engine can count on for the right information. So, when your OE air temperature sensors fail, trust Standard Motor Products for replacements.
( 3 )
$23.99
Standard Motor Products T-Series replacement coolant temperature sensors are designed to meet the original equipment form, fit, and function. How well your vehicle performs depends on its coolant temperature sensor, so Standard T-Series sensors are manufactured from high-quality materials for dependability. If your check engine light is on, it could be to a faulty coolant temperature sensor. If that's the case, simply replace the worn, corroded coolant temperature sensor with a new ones from Standard Motor Products.
( 1 )
$5.99
Clearance
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$22.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 176 )
$40.99
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
Crown Automotive throttle position sensors restore proper idle, rpm, and fuel efficiency. Choose between a variety of TPS styles and fitments to ensure your vehicle's top performance. These economical units are available for numerous models. For quality, efficiency, and a perfect fit, order your replacement throttle position sensors from Crown.
( 3 )
$18.99
—
$51.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
