Availability
Showing In Stock Items. Show All 70 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$140.95
—
$172.95
$126.85
—
$155.65
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1525 )
$249.99
—
$279.99
Proform Mopar licensed high-torque starters spin your engine over faster than stock models. These high-output motors deliver 40 to 50 percent more cranking power, and they're made entirely from new—not rebuilt—components. They feature the retro-style Mopar logo and fit all Mopar V6, small block and big block engines applications from the 1950s thru early '90s. Proform Mopar licensed high-torque starters feature: • 4.41 to 1 sealed gear-reduction drive and full ball bearing construction • Gear reduction-type lightweight-style with natural finish • Cast aluminum mount • For 14.0:1 maximum compression ratio engines • 100 percent new component • Offset design for more oil pan clearance
( 36 )
$211.95
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 905 )
$241.99
Interstate Mega-Tron Plus automotive batteries are designed to meet or exceed OEM vehicle requirements for cold-cranking amps. They have removable caps to add water, extending the life of the batteries. Available in a variety of group sizes, Interstate Mega-Tron Plus automotive batteries will help you fire up your engine, time and time again, with no trouble.
( 38 )
$194.99
—
$211.99
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
Proform high-torque starters are 100 percent new, not rebuilt. They feature an offset design that results in more clearance between the oil pan and the starter. The powerful units are offered in a variety of styles, finishes, and other options for both manual and automatic transmission applications. These replacements are available for countless vehicles from the 1950s and up.
( 119 )
$143.99
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 652 )
$101.85
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
—
$249.95
$178.95
—
$224.95
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$223.85
Summit Bucks
Losing power? ACDelco alternators can power up your vehicle's electrical systems and charge the battery while the engine's running. They're direct replacements for your factory originals and are manufactured using ISO quality standards. With 100 percent new components and engineering enhancements, they provide improved performance, efficiency, and service life for your vehicle. Almost like your originals, but just a little bit better--ACDelco alternators. Order the model designed for your vehicle application.
( 162 )
$127.99
On Sale
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$284.96
$256.46
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$191.95
—
$225.15
$105.95
—
$123.95
On Sale
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 112 )
$292.46
$263.21
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$179.30
Mopar Replacement oil pressure sending units are genuine OE-replacements. That means your Chrysler, Dodge, Plymouth, Ram, Jeep—and some VWs—will receive the perfect part to repair and/or restore performance and safety, just as it should be. These sending units are made from high-quality materials to provide reliable, long service with the right fit, function, and value. Get accurate, viewable reads with the Mopar oil pressure sending unit designed for your vehicle application.
( 5 )
$114.99
It's such a sinking feeling to get into your vehicle, turn the key, and nothing happens. There are many new batteries to choose from, but Crown Automotive alternators are the right choice for Jeep, Dodge, and Chrysler vehicles. These alternators are based on the OE design and pulley style for easy replacement without the need for additional brackets or customization. Some versions have higher amperage alternatives for those vehicles with added sound systems, lights, or other power-draining accessories. Whether you believe in preventive maintenance, or need a quick replacement, Crown Automotive alternators will get you running right.
( 5 )
$103.99
ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.
( 2 )
$100.99
—
$176.99
You need a good spark to make good energy and power. Davis Unified Ignitions LiveWires are spark plug wires that deliver the spark that you need for the energy that you want. Made with space-age, non-flammable, heat-treated glass braid, LiveWires provide heat protection up to 1,400 degrees F and offer excellent resistance to moisture and chemicals. They feature a spiral-core stainless steel wire wrapped around a magnetic core, offering extremely low-ohm resistance for optimum spark travel. And there is no radio interference, enabling them to work well with delay boxes and stutter boxes. LiveWires have a durable silicone jacket and insulation with heat-shrink applied between the boot and sleeving to keep dirt and moisture away from the wire terminals. Another excellent feature of these custom-fit, ready-to-go wires is that they're foolproof. Each wire is numbered on both ends for the correct cylinder—making installation, removal, and reinstallation hassle-free. LiveWires are available in eye-catching colors to match the sparking power that they provide. Quality wires are more than just wire and coverings. Make sure that you're wired to fire with LiveWires from Davis Unified Ignition and Performance Distributors.
( 462 )
$149.00
Slip on a set of PowerCables spark plug wires from JBA Performance Exhaust to up the game of your ride! These plug wires feature 100 percent silicone jackets and unique boot ends that are designed to offer maximum clearance, while withstanding severe wear and tear for a longer lifespan. Don't put old spark plug wires on your new fully equipped engine when you can add JBA Performance Exhaust PowerCables spark plug wires for better performance and the reliability you expect! Features and benefits: * Extra thick diameters * Ultra-low resistance design * Wire wound mag conductors * Custom tailored lengths with cylinder I.D. labels * Improved under hood appearance * Resistant to heat and abrasion * Improved performance through ignition system * Superior Electro Magnetic Interference (EMI) suppression
( 55 )
$100.99
—
$103.95
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 20 )
$157.99
Howards Cams distributor gears are available in a variety of materials, styles, and diameters—machined to exacting tolerances. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps. Order the model recommended for your year/make and engine application.
( 25 )
$147.99
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$103.95
Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems
( 42 )
$179.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
