Availability
Showing In Stock Items. Show All 37 Items.
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 21 )
$21.99
—
$24.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$22.99
As the crankshaft flexes, the balancer absorbs incredible amounts of energy. ARP balancer bolt kits will ensure that your balancer is locked into position. They feature a 12-point head that accepts a deep socket to eliminate the fear of stripping the head.
( 618 )
$37.99
—
$44.99
Cummins by Mopar bellhousing dowel pins make perfect alignment possible. These pins will provide the right fit and function, so the install of your bellhousing will go easier. When working with your diesel build, Mopar offers all the parts—even the small ones—to make your job a success.
Not Yet Reviewed
$56.99
Fluidampr friction washers are a direct replacement for the washer in your Fluidampr high-strength bolt kit and full power kits. Fluidampr strongly recommends that this friction washer is replaced each time the damper is removed. These harmonic balancer components are made of high-quality materials and come in styles and thicknesses designed to fit your needs.
Not Yet Reviewed
$53.75
ACDelco V-ribbed serpentine belts resist the penetration of water, acids, and ozone--plus, they provide broad temperature tolerances. Their patented advanced technology design incorporates EPDM rubber, which stays soft and pliable longer than traditional belt materials. Neoprene and certain grades of rubber can harden, causing unwanted squealing and a shorter belt life. The flexible construction of these serpentines allows each belt to withstand many topside and backside bends. ACDelco offers their V-ribbed replacement belts in various lengths, widths, and rib quantities for a wide range of fitments.
( 37 )
$36.99
Put some tension on your belts with Dorman automatic belt tensioners. Rigorously tested for sustained performance by a team of product and quality engineers, Dorman's automatic belt tensioner assemblies are designed to provide proper tension to vehicle serpentine belts. They incorporate a damping design, torsion spring, and sealing system to ensure the proper functioning of many integral engine components. Replace worn-out or weak parts with Dorman automatic belt tensioners. The automatic belt tensioner should be replaced whenever the serpentine belt is replaced. Features include: * Quality tests include torque testing, spring-back testing, corrosion-resistance testing, and on-vehicle testing * Solid steel or aluminum construction for long-lasting durability * Highly resistant to heat and shock * Designed to fit properly every time
( 41 )
$31.99
When replacing the stock VGT turbo on your 6.7L Cummins with a non-water-cooled turbo, these delete plugs from Fleece Performance are a must. They conveniently fit the stock coolant feed from the riser block and coolant return on the firewall. Kit includes: * Two 16mm Allen head port plugs * One 18mm Allen head port plug
Not Yet Reviewed
$29.95
ACDelco V-ribbed accessory belts are excellent OE-style replacements. These belts use top-quality materials chosen to ensure outstanding resistance to heat and oil—as well as the superior performance that drivers demand. Each ACDelco V-belt is built to provide unparalleled strength and reliability. Choose the size that matches the specs for your car, truck, or van, then notice the improvement in torque just by installing a new V-belt!
( 13 )
$24.99
Sealed Power chrome piston ring sets are noted for their high wear-resistance and low cylinder wear. The face of the top rings in these sets is electroplated with hard chromium to provide a surface that's resistant to abrasive wear. This face coating will not flake off, even when exposed to high vibration and detonation. Being harder and less porous than a moly ring, chrome rings provide increased life in engines that are operated in dusty or dirty environments. Chrome coatings are used mainly on top rings where mechanical and thermal loads are greatest, and on oil rings that have a particularly high unit pressure. With the load levels of modern internal combustion engines ever increasing, there's often a need to improve the thermal and/or mechanical load-carrying capacity of piston rings—and chrome is one solution. These piston rings are available in a wide range of bore sizes and thicknesses for applications from the 1940s and up. Features and benefits of Sealed Power chrome piston ring sets: * Increased wear resistance in dirty air conditions * Exacting tolerances * Meets or exceeds OEM specifications * State-of-the-art manufacturing * Recommended for use on dirt tracks and for off-road racing
( 5 )
$35.99
These Mishimoto magnetic oil pan drain plugs are manufactured with neodymium magnets, which hold on to all of the metal debris that your oil filter misses, preventing it from going places where it shouldn't. They feature an aluminum head with the Mishimoto logo and have a black anodized finish for protection.
( 12 )
$22.95
Melling cylinder sleeves are available for a variety of bore sizes to fit all sorts of cylinders. They are great for fixing damaged cylinders. Get your cylinder sleeves from Melling on order today!
( 59 )
$33.99
Perma-Cool sandwich adapters are installed between the oil filter landing on the engine block and the oil filter to route the oil to a remote oil cooler. They are diecast from aerospace quality aluminum. O-rings and illustrated multilingual instructions included.
( 7 )
$54.80
Continental OE Technology Series Multi-V belts are factory-style replacements covering virtually all vehicle applications. These new straight-ribbed multi-V belts offer original fit and function that professional technicians appreciate for their customers. The serpentine belts are constructed with advanced EPDM rubber compounds that improve durability and deliver a quieter ride. They're available in well over a hundred lengths, with rib options ranging from three to 14. Order the model recommended for your car, truck, van, SUV, or crossover.
( 324 )
$35.99
—
$38.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 133 )
$31.99
Take up the slack with Dayco No Slack Tensioner pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Tensioner pulleys.
( 20 )
$44.99
Cummins by Mopar offers replacement pushrods are available for specific diesel applications. These steel rods are machined to stock specifications, restoring efficient performance to your engine's camshaft and valve operation.
Not Yet Reviewed
$42.99
Cummins by Mopar engine oil dipsticks are genuine OE replacements. They're made from quality materials to provide reliable, long-term service with the right fit, performance, and value. The dipsticks are available in numerous configurations for hundreds of Dodge and Ram diesel applications from 1997 and up.
( 1 )
$29.99
—
$46.99
Strengthen your Dodge Cummins with a new PRW Fulcrum upgrade kit for your Dodge Cummins Diesel. These rocker arm Trunnion-style upgrade kits are designed to upgrade your rocker arms to a bronze, bushed assembly and helps alleviate rocker body wear. Bushings are ensured lubrication with oil flow channels machined into the fulcrum. Sold individually, or as set of 12.
Not Yet Reviewed
$21.16
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
