Availability
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$8.99
Crown Automotive manual transmission input bearing retainers are heavy-duty steel retainers built to replace parts, which are prone to suffer oil starvation at slightly deficient oil levels. Retainers often get worn or damaged due to being in constant motion any time the engine is running. Worn or defective retainers may create excessive noise, which continues as long as the engine runs. A severely worn input shaft bearing can cause the transmission to slip out of gear while moving. So, don't wait; go with Crown and travel with peace of mind.
( 6 )
$66.99
—
$135.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$9.99
—
$184.99
Oversize tires and stock manual locking hubs go together as well as water and oil. If you've heard the loud "POP," signaling blown hubs, or wish to be proactive, replace them with Crown Automotive manual locking hubs. These hubs provide greater strength than the stock units to help you crest steep hills, roll through rocks, and slide through mud. Crown Automotive manual locking hubs will have you rocking and rolling.
( 5 )
$143.99
Crown Automotive clutch fork return springs will provide OE fitment and function. The proper movement and pressure of your clutch components depend on the many springs involved. No matter which throwout fork or lever springs you need for your classic rig or newer ride, Crown can help keep your clutch in optimum operation for smoother shifts. Choose your replacements from the selection of Crown clutch return springs for improved performance.
( 17 )
$2.99
Contamination, leakage, and age are all factors that can lead to transmission and filter issues. Crown Automotive transmission filters are designed and built to OEM specs for easy fitment and reliable service. Old or contaminated transmission oil can cause major issues for the transmission. Crown Automotive transmission filters are available in various styles for direct fitment on many vehicles, including submodels from Jeep, Chrysler, Dodge, and Ram. Units are sold individually—or as a kit with gaskets. Encourage better performance with high-quality filters from Crown!
( 2 )
$42.99
Crown Automotive stocks differential carriers that will keep your vehicle moving. These case-only selections feature rugged steel construction and are available in limited slip and open styles. Replace or build the power to keep your wheels turning with help from Crown differential carriers.
( 2 )
$108.99
Crown Automotive stocks differential case kits that will keep your vehicle moving. They feature rugged steel construction and are available in a selection of assemblies with gear sets, or with shims, gaskets, and ring gear bolts—and many other choices in-between. Replace or build your needed power to keep those wheels turning with help from Crown differential case kits.
Not Yet Reviewed
$218.99
—
$237.99
Whether you're doing preventive maintenance or you hear that old familiar whine, turn to Crown Automotive differential carrier bearings to help restore a quiet ride. These oil bath bearings will keep differentials or axles spinning straight down the path. Crown differential carrier bearings are sold individually or as a kit, and are available for a wide range of vehicles.
( 4 )
$15.99
—
$206.99
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM"--the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive transfer case yokes, so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you're on a trail ride or hot rodding on the street, always be prepared with Crown Automotive transfer case yokes.
( 2 )
$64.99
That whining and grinding noise down near the clutch isn't going away—until you address the problem. When the pilot bearing on your vehicle is damaged or worn-out, replace it with a new unit from Crown Automotive. These bearings or bushings are designed and built to OEM specs for excellent fit and reliable performance. They're available in a variety of styles for fitment on specific vehicle applications. Silence the excess noise with Crown Automotive pilot bearings.
( 9 )
$9.99
—
$17.99
Crown Automotive ring gear bolt kits attach your differential to the carrier. These replacement ring gear bolts will help give you the peace of mind that you did the job right the first time. They are designed to handle the incredible shock loads of a drag racing launch or city driving.
( 5 )
$1.99
—
$14.99
Crown Automotive clutch release bearings will restore the "heart" of your clutch operation. Whether you call them throwout bearings or release bearings, they are the components that move back and forth—pushing and releasing the other components to engage or disengage your clutch for smooth shifting. Just as your heart's pumping keeps you going, so it is with the release bearing and your clutch. So, for an OE fit and better clutch performance, choose your replacements from the Crown selection—available for a wide range of makes and models.
( 6 )
$24.99
—
$80.99
Vehicles with manual transmissions are not only fun to drive, but also allow excellent control during all weather conditions and environments. Crown Automotive clutch forks can help you cure clutch issues. They're designed and built to OE specs for easy installation and reliable service. Forks deal with a lot of pressure, so they should be checked for cracks on a regular basis. Crown replacement clutch forks are designed for proper fitment on a variety of makes/models.
( 7 )
$23.99
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 92 )
$121.99
—
$259.99
Crown Automotive U-joint strap kits are constructed from heavy-duty materials to match OEM standards for better performance and increased reinforcement. They offer superior strength and security to ensure that your U-joints stay fastened in place. These U-joint kits include everything that's needed to be properly installed in just minutes.
( 4 )
$8.99
—
$9.99
Transmission solenoids direct transmission fluid into the valve body to engage the correct gear. Crown Automotive OE-style transmission solenoids can replace a failing unit to prevent tranny problems. These elements can fail due to electrical issues or dirty fluid that's caused the shift solenoid to become stuck open/closed. If you are experiencing erratic shifting or a shifting delay, Crown can help get you back in gear.
( 4 )
$73.99
—
$103.99
There's never a good time for transmission problems, but you can reduce the possibility of being stuck in the middle of a busy intersection by using Crown Automotive automatic transmission rebuild kits. These overhaul kits are specifically designed for each particular transmission, to help keep your Jeep or Dodge truck moving down the road instead of blocking traffic. An ounce of prevention is worth a pound of cure. Stay ahead of issues with Crown Automotive automatic transmission rebuild kits.
Not Yet Reviewed
$293.99
Crown Automotive offers a wide selection of axle bearings to meet your application needs. They have bearings for the front and rear that will keep your axles spinning without resistance. Whether you need just a bearing or a complete bearing and seal kit, Crown Automotive has the quality choices to get your project revolving.
( 31 )
$11.99
—
$24.99
Crown Automotive automatic transmission shift solenoids will efficiently control the flow of transmission fluid and restore smooth gear changes. Covering Jeep, Chrysler, and Dodge vehicles, they are built from quality materials and with fit and function just like the originals. No hardware is included; reuse existing hardware.
Not Yet Reviewed
$69.99
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need new Crown Automotive pinion bearings. They're designed and built to OEM specs for easy fitment and reliable service on stock axles. Always remember to order new bearing cups, as well, unless they're included as part of your kit. These pinion bearings are available for a wide range of specific vehicles. When replacing the ring and pinion, choose Crown Automotive pinion bearings for the right fit every time.
Not Yet Reviewed
$20.99
—
$42.99
Crown Automotive U-joint bolts are the perfect fasteners for your U-joint straps. These strong specialty bolts are available in different head configurations, and may serve other purposes, as well. Crown has the small items to service, repair, and restore your Jeep, Chrysler, Plymouth, and Dodge vehicles.
Not Yet Reviewed
$1.99
When you see oil leaking from your Jeep's rear axle, it's time to order new Crown Automotive axle seals. These seals are designed for oil bath axles and are built identically to the originals for excellent fit and finish. Whether your brakes end up coated in oil or the lube simply runs onto the ground, these economical Crown Automotive axle seals will solve messy problems that could lead to more serious issues. Dozens of styles are available to service numerous vehicle applications.
( 13 )
$5.99
—
$21.99
In late 1980s to mid 90s, Jeep used a vacuum actuator to shift the transfer case and corresponding front axles in and out of 2WD, and high or low 4WD. Crown Automotive 4WD front axle actuators will replace faulty vacuum switches to improve your vehicle's get-up-and-go, no matter the terrain.
( 8 )
$68.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
