Availability
Showing In Stock Items. Show All 25 Items.
Billet Specialties universal billet aluminum pedal kits add a finishing touch to the driver compartment. These universal kits are available in your choice of diamond cut or flame designs, and require minor drilling for installation. They are machined from 6061-T6 billet aluminum, polished to a mirror finish, and include hardware with instructions.
( 19 )
$181.95
—
$186.54
Holley drive-by-wire accelerator pedals perfect complements to any vehicle using DBW. They offer plug-and-play compatibility with Holley EFI and simply bolt into the stock locations when used with Holley's DBW pedal brackets (sold separately). Features: * Simplifies engine swaps with DBW accelerator systems * Works great with Holley EFI installation * Provides modern look and performance for classic vehicles * Fits in OE location when used with Holley DBW pedal brackets
( 1 )
$108.95
Ram pedal height adjuster kits allow adjustment of pedal height downward. They include mounting bracket, feed line kit, and adapters. Ram pedal height adjusters will not increase bearing travel.
Not Yet Reviewed
$219.00
OER brake pedal clevises are universal-fit for many potential uses. They measure approximately 2 in. long, and are tapped for 3/8-24 fine thread. OER clevises are offered chrome plated to add some sparkle to your brake components or zinc plated for superior corrosion resistance. You can connect a brake master cylinder, or power brake booster pushrod to the brake pedal arm with OER brake pedal clevises.
( 3 )
$12.99
Are your pedal pads worn or cracked? Not only do they look bad, but damaged pedal pads can also be a safety hazard while driving. Replace them with these reproduction pedal pads from OER! These top-quality pedal pads are identical replicas of the factory originals, down to the ribbing on the pads. Gas, brake, clutch, and E-brake pads are available for a variety of applications and correctly install in place of the stock pads. OER pedal pads will improve the appearance of your interior, and their rubber tread will help keep your feet in good contact with the pedals for safe braking and acceleration.
( 100 )
$20.99
—
$54.99
Are you tired of having cracked or worn-out pedal pads? Metro Moulded pedal pads not only improve your ride's appearance, but they also help keep your feet securely in place. Metro Moulded Parts manufactures these pedal pads from quality materials, ensuring years of trouble-free performance.
( 16 )
$22.99
—
$78.99
Crown Automotive replacement pedal pads are available for your brake, clutch, and gas pedals. Weather and time can wear down and deteriorate your stock pads. The ridged rubber molded design on Crown pads will hold up for long-lasting durability. Whether you drive a car, truck, van, or Jeep, Crown has an assortment of pedal pads with OE style and fitment. Just slip them on!
( 9 )
$4.99
—
$14.99
Mopar replacement pedal assembly components are available for brake, gas, and clutch pedal in your vehicles. Each of the Mopar replacement components is manufactured from quality materials and provide proper fit, form, and function to work directly with your vehicle. Order the Mopar replacement pedal assembly component that is suited to fit your needs.
Not Yet Reviewed
$9.99
Silver Sport clutch and brake pedal conversion kits take you from automatic to manual or use them to replace your worn out original pedals and linkage. Offered for several different vehicle applications, each SST kit contains the necessary components--bushing, rods, and boots to pedals and pads--to complete your conversion. Choose the kit best suited for your vehicle.
Not Yet Reviewed
$399.95
On Sale
Properly mount your Holley DBW accelerator pedal in the OE location with Holley brackets. CNC cut and formed from steel for consistent precision, the brackets have a black powdercoated finish to provide a neat, clean appearance, added durability, and years of worry-free use. Holley drive-by-wire accelerator pedal brackets are available in several styles to fit specific applications. Choose the one designed for your car or truck. Features: * Installs in stock location using factory hardware for easy installation * Designed for use with Holley #145-160 or OE C6 Corvette accelerator pedal
( 7 )
$179.95
$98.95
—
$171.95
These Lokar Competitor Series throttle pedal assemblies are designed with a unique internal spanner nut, ensuring perfect pedal tension. By adding this built-in tensioning feature, Lokar has eliminated the possibility of excess slop in the throttle pedal. Another milestone of the Lokar Competitor Series throttle pedal assemblies is their incredibly sturdy mounting base. The design of these pedals has enabled them to provide over a 1 1/4 in. wide mounting base, yet maintain a narrow and sleek appearance. As if that weren't enough, the mounting base is available in either a centered or an offset version, which will raise or lower the center of the throttle assembly by an entire inch. This feature is incredibly accommodating when installing the pedals in a vehicle that already has the throttle cable installed. In Lokar's everlasting quest for perfection, they have also built the pedal assemblies with their exclusive large-diameter, 3/4 in. x 48-tooth, fine-spline steel insert to provide the ultimate in strength and durability. This also allows for infinitely adjustable arms, which can be swapped for the right and left adjustment of the throttle pad. All of these features, coupled with a spring-loaded throttle pad, Delrin bushings, and a superior design, have made the Lokar Competitor Series throttle pedal assemblies the finest and most versatile throttle pedals available.
( 43 )
$267.95
Lokar's Midnight series billet aluminum gas pedals are ball-milled and spring-loaded like the OEM design. Their removable lower arm is splined for versatility in mounting them to the right or left of the mounting bracket. The upper arm is a one-piece design, and the shaft and arm are one piece, requiring no pins.
( 115 )
$267.95
Dorman accelerator pedal assemblies restore proper operation and prevent drivability problems with the pedal sensor. They feature high-quality materials and include installation hardware, as well as step-by-step instructions. Dorman accelerator pedal assemblies are direct replacements--delivering a proper fit, trouble-free performance, and significant cost savings. Order the model designed for your vehicle application.
Not Yet Reviewed
$184.99
—
$364.99
Lokar Midnight Series black anodized, ball-milled brake, gas, and clutch pedal pads will coordinate beautifully with any interior. Made of high-quality materials, they're designed to fit the original steel brake, gas, and clutch pedals. No drilling is needed to mount the pads, and many are available with a rubber insert for extra comfort and safety. Order the size, shape, and pedal position needed for your vehicle. Midnight Series pedal pads' smooth finish and style make them perfect for any interior.
( 37 )
$96.95
—
$145.95
Dorman pedal pads are designed to replace your factory originals that have seen better days. Tough and practical, they stand up to all the elements--including harsh winter salt. Their true value, however, lies in safety: made of hardened rubber to stop shoes from slipping, they can be counted on to withstand continual wear and tear. Dorman pedal pads are available to fit the brake, clutch, accelerator, and parking brake positions. They install easily--just slip the pad onto the pedal. Where applicable, they are often sold in sets of two.
( 93 )
$6.99
Crown Automotive pedal assembly components facilitate the fuel delivery, stopping, and shifting capabilities of your vehicles. These quality Crown OE-style replacement parts are available for the vehicles listed in the applications.
( 1 )
$1.99
—
$3.99
Modo Innovations pedal covers are manufactured from high-quality aluminum for muscle cars. Unlike any other on the market today, Modo's are a 2-piece design which consists of an inner and outer piece that bolts through your factory pedal. They are made in-house using CNC machines to ensure consistency as well as old school craftsmanship that in certain instances there are no substitutes. Modo Innovations pedal covers are offered for several different makes and models; choose the ones best suited for your vehicle.
( 3 )
$149.99
—
$152.99
Lokar Competitor Series pedal pads add style and function to your classic car. Available individually and in sets, the pads provide a compact and clean look, and are curved to match and bolt directly to factory pedals. Lokar Competitor Series pedal pads are designed with hidden screws, and are offered in brushed billet aluminum or black with rubber inserts.
( 1 )
$145.95
Lokar pedal pads are designed to coordinate beautifully with any interior. They're available in a variety of sizes, shapes, and materials for fitment on gas, clutch, brake, dimmer switch, and emergency brake pedals. Most models include durable rubber inserts for no-slip footing. Order the universal-fit or application-specific pads recommended for your vehicle.
( 102 )
$145.95
American Powertrain offers brake and clutch pedal assemblies for dozens of applications from the 1960s and '70s . These firewall-mount replacements include new brake and clutch pedal arms, rubber pedals, and solid bushings for a great feel. Order the assembly recommended for your vehicle.
Not Yet Reviewed
$591.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
