Availability
On Sale
Mr. Gasket high-performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpms. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced high-performance thermostats have brass-and-copper construction, and open at the right temperature regardless of engine rpm.
( 235 )
$29.11
$21.83
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 93 )
$45.98
—
$65.89
$34.49
—
$49.42
On Sale
Burning your hands on headers or the exhaust manifold when bolting them on just became a thing of the past. Mr. Gasket HEADLOCK locking header bolts simplify header installation with high-strength, 2-in-1 self-locking bolts that eliminate the need for lock washers. Designed for the performance engine builder, these innovative, patent-pending fasteners have 24 equally spaced serrations in the face of the hex head. The bolts grab and lock on to your manifold surface, virtually eliminating the chance that one might back out from vibration or because of the varying expansion rates of different metals. Mr. Gasket HEADLOCK locking header bolts are available for numerous domestic applications, including Chevrolet, Chrysler, Ford, AMC, Oldsmobile, and Pontiac. They're manufactured from stainless steel, designed to withstand tensile strengths of 150,000 pounds per square inch, and come with a bright polished finish.
( 50 )
$47.95
—
$56.95
$31.17
—
$37.02
On Sale
ACCEL SuperStock 4000 Series spark plug wire sets will upgrade your OE ignition system for high-spark delivery levels and RFI suppression. They extrude the silicone jacket over a tightly woven, rugged fiberglass braid that meets or exceeds OE specifications. ACCEL offers their SuperStock 4000 Series wire sets in various color schemes to match nearly any application! More product features include: * Jackets rated up to 450 degrees F * 7mm or 8mm yellow, red, black, and blue silicone jackets * Orange and other color-matched spark plug boots with terminals * Available for pre and post-HEI vehicles * Custom-fit, universal, and import
( 133 )
$68.99
—
$79.05
$51.38
—
$51.74
On Sale
If you are tired of replacing old, worn-out header gaskets, Patriot Seal-4-Good header gaskets make the perfect solution. Made from multi-layered "dead soft" aluminum or stainless steel, these gaskets conform to your headers for the ultimate seal. They are virtually blowout and burnout-proof and are also totally reusable. In fact, these gaskets are so good, they are likely to be the last header gaskets you'll ever buy—until your next project!
( 17 )
$47.70
$42.93
On Sale
Clearance
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 81 )
$23.99
—
$61.97
$21.59
—
$55.77
On Sale
Increase your spark energy delivery with ACCEL SuperStock 3000 Series spark plug wire sets. They provide a performance upgrade for your OE-style wires without breaking the bank, and ACCEL offers several models to match your application. Meet or exceed OE resistance requirements economically with SuperStock 3000 Series spark plug wire kits!
( 6 )
$57.69
$37.50
On Sale
Installing headers can sometimes be a real pain, due to the tight spaces and the location and shape of the tubes. Mr. Gasket can help make installation a little easier and also help prevent annoying exhaust leaks from under-tightened header bolts. They have both the socket-head and hex-head styles of header bolts available. Hex types are heat-treated Grade 5 steel and have smaller-than-standard heads to ease access in tight spaces. Socket-head bolts are made from stronger Grade 8 steel for added ruggedness and they're great for those really difficult-to-reach spots. Both styles have a protective black oxide finish.
( 45 )
$40.63
—
$41.95
$22.35
—
$23.07
On Sale
ACCEL SuperStock 5000 Series spark plug wire sets are available in many sizes, styles, and colors to cover most any needs and vehicles. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response, and reduced emissions. The wires feature silicone construction and are rated for 450 to 550 degrees F (depending on the set). The wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Choose your set.
( 51 )
$89.65
$49.31
On Sale
JBA Performance Exhaust offers exhaust header gaskets to aid in the fitment of your JBA exhaust product to fix an exhaust manifold gasket leak—or prevent it from happening in the first place. These premium header flange gaskets feature a steel core laminate construction to ensure a good seal and are available in a variety of gasket applications to be an exact port match with JBA Performance Exhaust headers.
( 16 )
$45.60
$41.04
On Sale
Mr. Gasket offers header/manifold exhaust gaskets which are fabricated from large-fiber gasket material bonded by a high-heat resistant compound. They are precision die-cut for each application, and provide excellent sealing and durability.
( 12 )
$67.99
$44.19
On Sale
Doug's premium header flange gaskets are made extra-thick from specially formulated gasket material. These gaskets are rated up to 1,100 degrees F and handle exhaust pressures of up to 3,700 psi. Each gasket is designed for an exact port match with Doug's headers.
( 29 )
$44.95
—
$48.25
$40.46
—
$43.42
On Sale
Patriot offers these precision-machined header flange kits for many popular engine families. These header flange kits come complete with premium gaskets and header bolts. Choose between 3/8 in. and weight-saving 5/16 in. flanges.
( 24 )
$53.00
$47.70
On Sale
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$27.99
—
$48.99
$25.19
—
$44.09
On Sale
Lakewood clutch fork boots are made of soft pliable rubber to flex easily. They help keep unwanted dirt, dust, and moisture from entering the bellhousing, which can cause contamination of the clutch.
( 17 )
$48.33
$26.58
On Sale
Agility Auto Parts offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. They meet or exceed all OEM specifications for fit, form, and function. Order the Agility Auto Parts fuel pump tank seals designed for your application to help eliminate leakage.
( 2 )
$33.99
$30.59
On Sale
Looking for an easy way to advance or retard your cam? Look no further than these bushing sets from Mr. Gasket. Use the bushings to advance the cam for more low-end torque and mid-range horsepower, or reduce excessive low-end torque and increase top-end horsepower by retarding the cam. These sets include four offset bushings and one zero degree bushing to return your timing back to stock.
Not Yet Reviewed
$48.61
$26.74
On Sale
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series vehicle speed sensors (VSS) will restore accurate measurement of your vehicle's wheel speed so the ECM can modify engine function appropriately. They offer high-quality materials to ensure durability, a direct-fit replacement for ease of installation, and testing for performance and reliability. Choose the value and quality of Standard's T-Series to service your vehicle.
Not Yet Reviewed
$23.99
$21.59
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$60.75
$54.68
On Sale
Lakewood bellhousing bolts are for bellhousing to engine block and trans to bell attachment. These threaded hex head bolts are built from high-strength chromoly steel, and then black oxide coated for a tough, long-lasting finish.
( 3 )
$49.95
$27.47
On Sale
Holley power steering mounting plates provide the perfect solution for the factory power steering pumps on late-model engines that have too much pressure for the steering box on most older muscle cars and trucks. These billet aluminum mounting brackets bolt to existing tapped holes on the left side of the cylinder head of Gen III Hemi style engines. Keep your power steering pump securely in place with Holley power steering mounting plates.
Not Yet Reviewed
$66.55
$36.60
On Sale
Clearance
Agility Auto Parts offers a complete line of automotive condensers covering most of North American vehicle applications. These certified components meet or exceed the manufacturer's specifications, making them ready to install out of the box. Engineered and manufactured under ISO TS16949 quality system guidance, every APDI air conditioning condenser is 100 percent leak-tested for trouble-free operation!
( 8 )
$53.99
—
$55.99
$48.59
—
$50.39
On Sale
Agility Auto Parts offers a complete line of mechanical fuel pumps covering a wide variety of North American vehicle applications. They are engineered to meet or exceed all OEM specifications. Agility Auto Parts mechanical fuel pumps are drop-in replacements right out of the box with all the necessary components included.
( 21 )
$34.99
—
$41.99
$31.49
—
$37.79
On Sale
Standard Motor variable cam timing solenoids are direct-fit OE replacements for your vehicle's original components. These solenoids effectively restores engine horsepower and torque curves while reducing emissions and improving vehicle efficiency. Standard variable cam timing solenoids have been manufactured to exceed OEM specifications for dependable, accurate, maintenance-free operation.
( 4 )
$22.99
—
$46.99
$20.69
—
$42.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
