Availability
Showing In Stock Items. Show All 69 Items.
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 133 )
$11.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$20.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$14.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 504 )
$15.99
—
$17.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$11.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$17.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$13.99
—
$16.99
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 21 )
$21.99
Driven Racing Oil offers filters for virtually every application. These replacements are available in different makes, styles, sizes, and micron ratings. Oil filters remove contaminants from your engine's oil that can accumulate over time as the oil keeps your engine clean and lubricated. Tiny, hard particles can wear the surfaces in your engine, so an efficient filter is essential to performance. Order the model best suited for your vehicle.
( 2 )
$17.49
Mopar Performance valve springs are made from stronger steel than OEM and are intended for general performance use. They're available for many applications in single and dual versions. And make a great choice for your muscle car.
( 4 )
$13.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 164 )
$16.99
—
$19.99
These COMP Cams shaft-type rocker arm adjusting screws are precision-machined from premium billet steel material and selectively heat-treated to provide maximum strength. They're extremely lightweight and are drilled for oiling, depending on your application. Whether you're rebuilding your engine or keeping up scheduled maintenance, COMP Cams shaft-type rocker arm adjusting screws will keep your valvetrain operating smoothly.
( 5 )
$22.95
These magnetic oil drain plugs from Mr. Gasket accumulate metal particles found in the oil, preventing possible damage to the engine. Best of all, they're not only quality-made, they're totally affordable protection for your investment!
( 25 )
$17.60
Durable and heavy-duty Edelbrock valve guides are made of manganese-bronze material for the ultimate in wear. They are designed to fit Edelbrock cylinder heads.
( 4 )
$17.95
Mopar oil filters are ready for high performance. They are engineered to meet the demands of your heavy-duty and high-power applications. The the best performance of your vehicle choose genuine Mopar Performance oil filters.
( 5 )
$11.99
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 114 )
$15.99
Replace your worn-out intermediate shaft bushing with a new one from Mopar Performance. Their bronze bushings offer you the perfect fit and function. Choose genuine Mopar parts to service your vehicle.
( 7 )
$23.79
Sealed Power Hi-Rev hydraulic lifters operate at or near zero lash for higher rpms without adjustment, unlike a mechanical setup. They have a reduced internal height to maintain the proper valvetrain geometry of a stock rebuild. They are recommended for high-performance street and racing use.
( 2 )
$14.99
Wrap up your engine build with BluePrint Engines' oil and filters. Their oil filters are available for your SBC/BBC, SBF/Mopar, and LS-style engines. These filters are high-quality, canister styles recommended by BluePrint with premium filter media.
( 11 )
$13.95
Available for a wide selection of popular engines, Proform chrome engine oil dipsticks kits consist of both the stick and the tube. These kits have classic hook handles.
( 92 )
$13.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$12.99
Dayco High Performance V-belts deliver more flexibility and increased airflow around the accessory drive belt, so they run cooler and last longer than most competitive belts. Dayco was one of the first to develop raw edge sidewall construction, which facilitates controlled slippage around pulleys. This feature ensures the superior performance that drivers demand from their vehicle. The V-belts' three plies of neoprene-impregnated fabric resist heat, oil, and grease. A specially formulated treatment of the polyester cord provides the strength, stability, and reliability that's required within the standards of today's industry.
( 85 )
$11.99
—
$21.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 91 )
$18.99
Stop a leak before it can even get started! These locking valve cover bolt kits from Stage 8 offer real assurance against oil leaks caused by loosening valve cover bolts. The unique patented and trademarked functional design of these locking valve cover bolt kits features three easy-to-install pieces, a Grade 8 steel grooved bolt, a locking retainer, and a spring clip.
( 9 )
$28.06
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
