Availability
Summit Bucks
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1520 )
$279.99
—
$299.99
Summit Bucks
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 434 )
$319.99
—
$329.99
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
B&M automatic StarShifters normally work like standard detent shifters, but by simply pulling the lockout trigger and moving the stick to low, they become full ratchet action shifters for quick gear changes. With a cable-operated mechanism, a universal floor-mount console, NHRA/IHRA-approved reverse lockout, a neutral safety switch, and a polished aluminum T-handle, the StarShifters are at home on the street or the track.
( 154 )
$340.95
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 222 )
$499.95
—
$527.95
Do you want to move a column shifter to the floor of your project car and still retain that performance flavor? B&M Unimatic shifters are just the ticket! They look identical to a manual 4-speed shifter and, because of their cable-operated design, they can be easily installed. Like the B&M top line shifters, they include a neutral safety switch and a 5 ft. cable and a black plastic T-handle.
( 73 )
$299.95
B&M truck shifters feature the classic Megashifter design, in a configuration that will fit your light truck! All of the things that you expect in a B&M shifter are right here and ready to install. The Truck Megashifters include a taller base and an adjustable floor mount bracket for proper installation.
( 57 )
$527.95
B&M Pro Ratchet automatic shifters have the style and quality for professional racing, along with easy ratchet action. The Pro Ratchets have an NHRA/IHRA-approved reverse lockout that can be operated with one hand, a neutral safety switch, and a backup light switch. They work with both forward and reverse pattern valve bodies and most 3 and 4-speed transmissions. Additional installation kit required for some transmission models. Compatible with CO2 and electric shifters, these shifters include a brushed aluminum cover and a 5 ft. super-duty race cable.
( 85 )
$449.95
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$397.95
—
$514.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 403 )
$449.95
B&M QuickSilver automatic shifters have cable-operated ratchet action for dependability, and a chrome plated stick and cover for good looks. These QuickSilver shifters include an NHRA/IHRA-approved reverse lockout, a lighted gear indicator, and they will work with reverse pattern valve bodies.
( 170 )
$483.95
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 900 )
$293.99
—
$343.99
These B&M automatic Sport shifters offer good looks and performance. Features include: * Black T-handle * Chrome steel stick and plate * Rubber boot * Black plastic console; can be trimmed to custom-fit any floor * Neutral safety switch * Backup light switch * Lighted gear indicator
( 48 )
$362.95
Summit Racing™ classic OEM radiators are designed to give you top performance cooling, while fitting your vehicle's mounts, so your ride can have a new radiator without having to modify brackets and fittings. The radiators are available in various styles and sizes to best fit your application or engine bay design.
( 449 )
$323.99
—
$380.99
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 190 )
$449.95
You'll be steering more efficiently with Borgeson power steering pump upgrade kits. They feature an improved pump, mounting bracket, and pulley for correct belt alignment. Gain improved steering feel for a better driving experience when you order the Borgeson power steering pump upgrade kit designed for your application.
( 83 )
$286.64
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 103 )
$395.00
—
$399.00
Milodon Street and Strip oil pans are designed for performance street as well as drag strip applications. They will fit most stock chassis and steering, as well as most headers. These well-engineered oil pans feature internal baffling that can free up additional horsepower. They're available in deep-sump and low-profile designs and are a necessity where high-volume oil pumps and increased rpm ranges are used.
( 253 )
$329.95
—
$389.95
On Sale
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$375.25
—
$463.04
$337.72
—
$416.74
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$540.97
LSM Racing has developed the standard for changing valve springs with their innovative design. These LSM Racing valve spring removal tools are simply the best quality and easiest to use tools available. They make changing valve springs a fast and simple one-person job.
( 110 )
$259.99
—
$275.99
Trick Flow® Track Max® hydraulic roller camshafts for big block Mopar engines are designed and dyno-tested to ensure maximum performance. Track Max® camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 1 )
$520.99
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 162 )
$255.00
—
$415.00
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$340.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
