Availability
Showing In Stock Items. Show All 101 Items.
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$389.95
—
$449.95
$350.95
—
$403.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$549.95
$493.95
On Sale
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 103 )
$395.00
—
$399.00
$355.50
—
$359.10
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$340.95
$306.85
—
$479.95
These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures them to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities that they gave their street/strip converter.
( 107 )
$543.95
On Sale
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$325.00
—
$455.00
$292.50
—
$409.50
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$573.95
$315.95
—
$515.95
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 47 )
$531.95
On Sale
Behind the scenes, but still important—McLeod's 1400 Series hydraulic throwout bearings play a special role in the optimal performance of your vehicle. Their most versatile choice to fit most applications, the 1400 bearings slip right over the front collar of your transmission. They're self-adjusting, meaning that you'll never have to adjust them as your clutch wears—and they can be set for the proper mounting clearance needed. The bearings are made of the finest hard-anodized billet aluminum, and equipped with quality elbow swivel fittings and high-pressure stainless steel lines for extreme durability. What happens backstage is just as crucial as what happens out front to bring about a rousing performance. You can't see McLeod 1400 Series throwout bearings as they work, but the part they play is vital to optimize the performance of your mean street or strip vehicle.
( 37 )
$395.00
—
$499.00
$355.50
—
$449.10
TransGo automatic transmission reprogramming kits are designed with performance in mind. Most, but not all models contain additional features like Gear Command that allows you to hold manual low to any speed, and shift back to low at any speed. They are great for strip cars or 4x4 rock crawlers needing to select low and not have it upshift. Most TransGo automatic transmission reprogramming kits can be tuned for HD (Heavy Duty) use by following the recommendations in the kits.
( 39 )
$295.71
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 135 )
$309.00
—
$359.00
TCI Pro Super transmission overhaul kits contain the same parts and pieces used in building TCI Streetfighters. You will receive components normally replaced on a transmission rebuild, along with new performance frictions and steels, plus a Trans-Scat valve body kit, which enables you to change the valve body to a manual/automatic setup that delivers both a good solid shift suitable for towing applications and a competition-quality shift for drag racing. Features: * Seals, gaskets, and bushings * High performance frictions and steels * Reusable-type pan gasket * Adjustable modulator * High-volume filter * Drain plug kit * Trans-Scat valve body kit * Performance band included in 700R4, 4L60E, and 2004R kits as they normally require a band during regular repair cycles
( 87 )
$388.95
—
$437.95
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$439.99
—
$490.99
Made on state-of-the-art CNC equipment, ATI SFI flexplates are double MIG/TIG-welded with certified American-made materials that far exceed SFI specs for safety. They're manufactured and toleranced from actual OEM drawings to ensure precise fit and location. Each is quality-inspected to exceed the flatness and runout tolerances of the OEM units. They are also precision-balanced on Hines digital equipment with a resolution of 1/10 oz. per inch. Available in dozens of configurations, ATI SFI flexplates can be ordered for fitment on vehicles covering every decade since the mid-1950s.
( 73 )
$299.00
Instant Rebate
Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. They're offered in four levels to perfect your performance needs and designed to handle as much as 500 hp. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified vehicles, the Stalker Series torque converters offer performance that is tough and reliable. Over a hundred models are available; order the converter recommended for your transmission application.
( 135 )
$347.76
—
$435.54
Instant Rebate
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 99 )
$525.66
On Sale
RAM Muscle Car clutch kits are the perfect choice for mildly modified street cars and trucks where driveability is most important. RAM Muscle Car kits are popular for older restoration vehicles as well as late model cars and trucks with basic bolt on engine modifications such as headers and air intakes. These RAM kits offer super smooth clutch engagement and increased holding power with only a slight increase in pedal effort. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 78 )
$379.00
—
$409.00
$341.10
—
$368.10
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$258.99
—
$278.99
The Wheel precision-machined flexplates from J.W. Performance feature double-welded, high-quality ring gear and the highest quality steel centers. They are designed to take the punishment of today's high-horsepower revving motors from street to ProMod applications. All of J.W.'s flexplates are SFI-certified and have a replaceable ring gear. They're available in a heavyweight style for quicker launches and more rpm during the shift, or in a lightweight style for faster turbo spool time and improved engine response in street, Circle Track, and road race applications.
( 33 )
$395.12
Wheel stands and hard launches create the need to control fluid in the transmission. These transmission pans for Stef's improve fluid control by increasing the capacity of your transmission. They are substantially lighter than stock or aftermarket steel and cast aluminum pans. These pans come complete with mounting hardware, a magnetic drain plug, and a filter extension when applicable. In an effort to ensure a long-lasting, leak-free product, these pans are constructed from 0.090 in. thick aluminum and feature 3/16 in. pan rails.
( 13 )
$253.99
On Sale
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$495.00
$445.50
PRW billet steel flywheels are CAD-engineered, and precision CNC-machined from 1045 billet steel. Purpose built to handle extreme-duty applications and the punishment of high-horsepower engines, they are balanced and carefully inspected throughout the manufacturing process to ensure you receive the quality you expect from PRW. These billet steel flywheels feature removable counterweights for versatility and are SFI-certified.
( 7 )
$353.13
—
$430.53
On Sale
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$429.00
—
$449.50
$386.10
—
$404.55
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$255.13
—
$596.74
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
