Availability
Showing In Stock Items. Show All Items.
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,789.95
—
$2,499.95
$1,609.95
—
$2,248.95
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 94 )
$1,349.95
—
$1,449.95
$1,213.95
—
$1,303.95
On Sale
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$959.00
—
$1,202.00
$815.15
—
$1,021.70
On Sale
World Products has made improvements to virtually every area of the new Merlin IV engine blocks—with the goal of producing the most technologically advanced and best-performing iron BBC block available today! New features include thicker main webs for increased strength and thicker cylinder walls which are nominally .310 in. @ 4.600 in. bore. In addition to the standard BBC 9.800 in. and 10.200 in. deck heights, new heights measuring 9.500 in., 9.850 in. and 10.250 in. are now available. The World Products Merlin IV engine blocks are also available with a 2.120 in. BBC cam journal and standard .842 in. lifter bores, or with a 2.283 in. journal for a 55mm Babbitt cam and .904 in. lifter bores. World Products has added a front oil feed for dry sump systems, and relocated the lifter oil feeds and restrictor provisions to the front of the blocks.
( 3 )
$3,842.02
—
$5,173.48
$3,457.82
—
$4,656.13
On Sale
Torque wins races. Reliability wins championships. Quicksilver Circle Track crate engines are designed to deliver on both counts. These small-block V8 engines are factory sealed for fair competition and will deliver season after season of reliable racing performance with minimal maintenance, while producing full power on pump gasoline. To comply with popular stock-class racing rules, Quicksilver Circle Track engines are shipped with factory seals on the intake, front cover, oil pan, and cylinder heads. Built with premium quality components, they feature a roller camshaft design and offer the best value for dirt and asphalt Circle Track racing. Order the engine needed for your build. Features: * Durable GM Gen+ remanufactured cast iron blocks -- Cost-effective and durable solution for this application -- Single-piece rear main seal -- 8-bolt 4-barrel aluminum intake manifold -- 6-quart oil pan * Roller camshaft * Hydraulic lifters * Stainless steel valves, hardened valve seats, head gaskets with stainless steel fire rings, and heavy-duty marine valve springs for extended life * 6 in. SFI-approved balancer * For off-road racing only * Shipped with a fresh fill of Quicksilver Performance Racing 25W-40 synthetic blend oil
Not Yet Reviewed
$7,306.31
—
$16,972.50
$6,575.68
—
$15,275.25
On Sale
World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.
( 1 )
$4,549.46
$4,094.51
On Sale
World Products has improved virtually every area of the new Merlin Gen VI engine blocks, producing one of the most technologically advanced and best-performing iron BBC engines available today! New features on these big block Chevy engines include thicker main webs for increased strength and thicker cylinder walls (nominally .250 in. @ 4.600 in. bore). They can utilize OE roller lifters or +0.300 in. tall aftermarket tie bar lifters. The World Products Merlin Gen VI engine blocks also include a standard Mark IV fuel pump boss for those wanting to keep a mechanical fuel pump.
( 1 )
$3,842.02
$3,457.82
On Sale
World Products Motown blocks are a great starting point for your performance engine. They feature many improvements over factory castings, including thicker cylinder walls, nodular iron main caps, and special bosses for front-feed oil systems. They will clear strokes up to 4.00 in. without clearancing and are available in different main and bore sizes to suit your needs.
( 1 )
$4,736.26
$4,262.63
On Sale
BTR LS engine gasket sets help you successfully complete your engine build, rebuild, or upgrade. With over 20 years in the performance industry, Brian Tooley has made a name for innovative products with affordable pricing. These gasket kits are no exception, with high-quality components—including header, oil pan, water pump, and valve cover gaskets, damper seals, oil galley plugs, and more. Order a BTR LS engine gasket set for your LS-equipped ride. Kits are available for applications from 1997 and up.
( 11 )
$204.99
$190.64
On Sale
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,049.95
—
$3,399.95
$2,743.95
—
$3,058.95
On Sale
Quicksilver's long block assemblies are all-new (not rebuilt, remanufactured, or reconditioned) marine engines and feature improved components, technology, and built-in durability designed to withstand years of marine duty--one of the most abusive and demanding environments for any engine. The foundation of every Quicksilver long block engine is a new iron block cast to Quicksilver's specifications and designed expressly for marine duty. Thicker castings ensure quieter operation and better durability in saltwater when compared to a standard automotive block. They feature Black-X composite valves that contribute to a 42 percent reduction in valve wear compared to traditional stainless steel valves with hardened seats, while smooth-flowing cylinder heads deliver added performance. Quicksilver Value Series long blocks are cost-effective solutions when replacing an engine with a reliable fuel system and dress components that can be reused, typically when the original engine block has suffered freeze damage. Select the long block needed for your build.
Not Yet Reviewed
$5,336.99
—
$8,429.99
$4,803.29
—
$7,586.99
On Sale
FiTech Ultimate TPI standalone ECUs bring an old GM TPI-controlled engine (L98, LB9) into modern times. These standalone EFI kits plug into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, FiTech Ultimate TPI standalone ECUs deliver new life into the GM TPI engine.
( 9 )
$847.00
—
$1,060.00
$719.95
—
$901.00
On Sale
Holley offers oil dipstick and tube kits for GM LS engines that are direct-fit assemblies for their LS retrofit oil pans. Each of these kits include the braided steel dipstick and black powdercoated steel tube built from the same high-quality materials as the OEM units. The oil dipstick and tube kits for GM LS engines provide both pieces together for one price to complement their oil pans.
( 35 )
$52.49
$47.25
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$435.95
—
$573.95
$306.95
—
$515.95
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$99.95
—
$603.95
$87.95
—
$448.95
On Sale
The lifeblood of your vehicle is lubricant—which is why Mr. Gasket engine oil dipsticks and tubes are so important. They're small, inexpensive parts that tell you if your oil supply is dangerously low. And besides the function they fulfill, these accessories look great under the hood. Made from steel or billet aluminum, the dipsticks are available in a black, polished, or chrome plated finish. Find the OE-style kit that's built to fit your specific engine application.
( 84 )
$18.31
—
$63.05
$12.97
—
$56.75
On Sale
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$170.95
$153.85
On Sale
BTR engine coolant plugs are ideal replacements for your old engine block coolant drain plugs. They're available in large brass models for LS motors or small zinc plated models for Gen III/Gen IV LT motors. The expansion plugs are offered individually or in larger kits. Make engine coolant drainage easy again with the BTR engine coolant plug designed for your LS/LT engine application.
( 2 )
$6.49
—
$44.99
$5.84
—
$40.49
On Sale
BTR engine expansion plugs can fill those sand-release casting holes in your Gen III/Gen IV engine block. They're 0.25 in. tall with a 0.625 in. diameter. Whatever you call them: freeze plugs; expansion plugs; core plugs—Brian Tooley Racing plug cores will properly seal up your engine block. They're available for dozens of LS-based Chevy engine applications from 1997 and up.
Not Yet Reviewed
$3.99
$3.59
On Sale
BTR engine valley cover gaskets are quality replacements for your LS2/LS3/LS7 Gen IV engine. These rubber/steel core seals are 0.125 in. thick and available for Chevrolet applications from 2005 and up. There's no need to skimp on quality or break the bank for your LS rebuild/repair—just order a BTR engine valley cover gasket.
Not Yet Reviewed
$14.99
—
$39.99
$13.49
—
$35.99
On Sale
Liqui Moly Special Tec AA engine oil is a fully synthetic low viscosity premium class motor oil developed to meet the high demands of modern Asian and American gasoline engines. The innovative additive technology guarantees best wear protection and engine cleanliness, lowest oil and fuel consumption, and highest engine efficiency. Liqui Moly Special Tec AA engine oil is ideally suited for engines with direct injection (GDI) and turbochargers. Key features: * Outstanding engine cleanliness * Excellent wear resistance * Excellent low temperature behavior * High lubrication reliability * Long engine service life * Smooth engine running * Miscible with all commercially available motor oils * Optimum stability to aging * Optimum oil pressure under all operating conditions * Reduces pollutant emissions * Instant lubrication after cold start * Reduces fuel consumption * Ideal with turbochargers and catalytic converters
Not Yet Reviewed
$9.99
—
$46.99
$8.99
—
$42.29
On Sale
Engine dress-up kits from Mr. Gasket are the ideal starter kits for customizing engines and enhancing the appearance of the engine compartment. All parts are chrome plated for lasting beauty.
Not Yet Reviewed
$146.85
$80.95
On Sale
BTR LS valve stem seals are designed for stock powdered metal and bronze guides; some include a built-in locator for single springs, and some use separate locators. The valve stem seals allow a carefully defined amount of engine oil from the cylinder head into the combustion chamber—to lubricate the rotating valve stem in the valve guide. BTR valve stem seals are produced from high performance materials for increased part life and lower wear. Order the set recommended for your year/make and engine application.
( 24 )
$1.49
—
$19.99
$1.34
—
$17.99
On Sale
Liqui Moly Special Tec B FE SAE is a modern fully synthetic motor oil for superior performance and long engine life. It has been developed specifically for use in numerous BMW gasoline vehicles without particulate filter (GPF) from 2002 and later. The low viscosity ensures excellent cold start behavior, improves engine efficiency, and reduces fuel consumption. Use with extended oil change intervals as per manufacturer. Liqui Moly Special Tec B FE SAE is available in different viscosities, several volume sizes, and has been tested safe with catalytic converters and turbochargers. Select the weight and amount desired. Features and benefits: * Outstanding engine cleanliness * Excellent resistance to aging * Reduces pollutant emissions * Ensures maximum engine performance * Minimizes friction
Not Yet Reviewed
$10.99
—
$52.99
$9.89
—
$47.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
