Availability
Showing In Stock Items. Show All 607 Items.
On Sale
BTR LS engine gasket sets help you successfully complete your engine build, rebuild, or upgrade. With over 20 years in the performance industry, Brian Tooley has made a name for innovative products with affordable pricing. These gasket kits are no exception, with high-quality components—including header, oil pan, water pump, and valve cover gaskets, damper seals, oil galley plugs, and more. Order a BTR LS engine gasket set for your LS-equipped ride. Kits are available for applications from 1997 and up.
( 11 )
$204.99
$190.64
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$171.95
—
$469.95
$121.95
—
$258.95
On Sale
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$170.95
$153.85
On Sale
Holley Gen V LT accessory drive installation kits allow the use of high-mount LS accessory drive systems on LT engines. These kits allow you to choose the source for supplemental accessories and components that are often already on a donor engine or host vehicle. This drive system has incorporated an upgrade to the conventional looking and central located (Camaro style) LS water pump that works in conjunction with an OEM LT1 truck harmonic balancer. Holley Gen V LT accessory drive installation kits include spacers for the LS style brackets, water pump spacers, solenoid reclocking retainer ring, re-routed front harness, and all hardware. Other features: * No engine modification required * Hides temperature sensor and harness connector from site * Cost effective and proven solution * Utilizes conventional single sided belt * Easy way to add power steering with your Gen V LT swap
Not Yet Reviewed
$289.95
$260.95
On Sale
Earl's Performance adjustable coolant crossover tubes simplify the plumbing of a remote mounted electric water pump by eliminating Ts, Ys, and extra hose ends. The design of these special crossover tubes allows for adjustable length—and for use as a coolant inlet or outlet on your engine. They're constructed from billet aluminum with a black anodized finish.
( 1 )
$279.95
—
$318.95
$153.95
—
$175.95
On Sale
Nitrous Outlet coolant crossovers stop hot cylinders and pre-detonation. First, the easily installed water vapor bleed kits help to distribute heat from cylinder to cylinder, decreasing temperature variation. Then the coolant crossover lines increase the flow through the engine block, reducing engine temperatures. Nitrous Outlet kits feature billet aluminum distribution blocks and stainless steel pre-bent hard lines or braided flex lines; they enable you to run these systems on your car all year long without the worry of a bursting hose, rust, or corrosion. The selection of coolant crossover kits comes complete with the necessary fittings and adapters to make the install hassle-free. Keep your block and cylinder cooler with Nitrous Outlet coolant crossovers.
Not Yet Reviewed
$286.99
$243.94
On Sale
Nitrous Outlet 860 Performance Hard-Lined LSX Steam Vent Kit utilizes the front and rear steam ports on the passenger and driver side head, allowing water flow through the ports and back to the radiator. This design prevents built up steam pressure which is known to create a rise in cylinder temperatures on number 7 & number 8 cylinders, causing pre-detonation.
Not Yet Reviewed
$255.99
$217.59
On Sale
When you change a cam, you don't need a complete engine gasket set, because you don't have to take everything apart. Mr. Gasket cam change gasket sets are tailored to deliver just the pieces that you need when you swap bump-sticks. They include gaskets for the valve covers, intake manifold, oil pan, water pump, timing-chain cover, and fuel pump.
( 13 )
$229.95
$126.95
On Sale
Swapping an LS engine into a classic GM A-body is nothing new. UMI Performance LSX engine mounts allow the installation of an LS engine directly into your A-body. By retaining the proper angle of the engine, you keep your pinion angles/drivetrain operating smoothly. This is a good reason to get pre-engineered mounts for the swap instead of trying to make something work. These mounts place the engine in the factory location, but also give you the ability to relocate the engine rearward up to 3/4 in. or forward 1/4 in. UMI's LS engine mounts will bolt directly to your car's frame and the LS block without modifications. Their brackets have greasable polyurethane mounts to dampen vibration, but still provide a solid feel and eliminate the need for additional modification when using the LS1 oil pan. New premium mounting hardware is also included. Getting a quality set of mounts designed for your application will definitely make the swap a lot easier
( 17 )
$189.99
$170.99
On Sale
UMI Performance LSX poly engine mounts bridge the gap between factory GM rubber and UMI solid engine-side mounts. These mounts are a great choice for builders wanting a high performance mounting solution without committing to race-oriented solid units. Dimensions are based on GM 22179268, as used in the 1998-2002 GM F-Body and as seen in the UMI '99 Camaro with Pace Performance LS3. Recommended for use with: UMI 2320, 2321, 2330 and factory K members, as well as 2406 and 2410 LS swap mounts used in other platforms. Additional notes: * LSX poly engine mounts are a great choice for high performance street driven vehicles * Direct replacement for GM factory rubber engine mount 22179268 * Designed to place the engine in stock location * 3/16 in. laser-cut steel construction using US steel * Gloss black powdercoat * High-quality flanged fasteners included (torque to 45 lbs.-ft.) * Re-use factory thru bolt (not included) * Notch indicates top of mount * If solid mounts are desired, use UMI 2323 and 2328 * Polyurethane mounts balance performance and quietness
( 4 )
$139.99
$125.99
On Sale
Doug's Headers offers engine swap transmission crossmembers for a variety of classic Chevrolet and GMC applications. They are CAD-CAM designed, welded steel with a durable black powdercoat finish for proper fit, strength, and appearance. Ideal for 2WD trucks with GM LS and LT engines, one part number fits with ALL popular late-model manual and automatic transmission swaps. The crossmembers come complete with necessary hardware and detailed instructions. Notes: * Designed to clear up to 3 in. exhaust systems with no loss of ground clearance * Designed for use with Doug's Headers line of LS engine swap products
( 5 )
$279.00
$251.10
On Sale
Holley LS engine air conditioner brackets are designed to help you mount your A/C compressor and tensioner in the correct position. They include the necessary hardware to mount the assembly in place—and require an application-specific installation kit, sold separately. Holley cast aluminum brackets are available for a variety of compressor styles. Choose the model needed for your application.
( 29 )
$236.95
—
$363.95
$167.95
—
$244.75
On Sale
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
$166.49
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 69 )
$199.95
—
$330.95
$179.95
—
$215.05
On Sale
Holley LS engine power steering reservoir kits feature everything you need to add a power steering fluid reservoir to any of Holley's driver side LS accessory drive brackets. They include one composite, baffled OE-style reservoir tank, one cap with a level indicator, a steel mounting bracket, a power steering pump to reservoir hose, and two hose clamps.
( 20 )
$165.95
$149.35
On Sale
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$294.99
$265.49
On Sale
These Doug's Headers engine swap motor mounts are designed to bolt on an engine not originally available in your vehicle. Best of all, they are specially designed to work with your Doug's headers. The mounts are manufactured from durable materials and include mounting hardware for installation.
( 7 )
$151.15
—
$161.75
$136.04
—
$145.58
On Sale
UMI Performance GM F-Body LSX engine mounts allow the installation of LS power into your 3rd generation F-body when using a UMI K-member. Easily convert your UMI small block K-member into an LSX bolt-in solution with these bolt-on mounts. They're designed for factory LS1 rubber engine mounts, polyurethane mounts, and also work with UMI solid aluminum motor mounts. UMI Performance GM F-Body LSX engine mounts place the LS engine in the factory location with the ability to move the engine slightly rear-ward. LS mounts are CNC laser-cut from 3/16 in. thick steel with MIG-welded 1/4 in. thick standoffs, and high-grade mounting hardware is included.
( 3 )
$149.99
—
$199.99
$134.99
—
$179.99
On Sale
Hooker Blackheart engine mount brackets are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles, making your swap a good fit. The mounts are fabricated from steel to provide a strong and rigid foundation for your engine.
( 2 )
$187.95
—
$263.95
$119.95
—
$237.55
On Sale
Holley LS engine alternator and power steering brackets are designed to help you get your alternator and power steering pump mounted in the proper location. They include the necessary hardware to mount the assembly in place. An application-specific installation kit may be required, and must be purchased separately if needed.
( 13 )
$292.95
—
$299.95
$194.95
—
$263.65
On Sale
Offering bolt-on convenience with the ability to upgrade your power plant, UMI Performance GM G-body LSX engine mounts allow you to install a LSX engine or reinforce an existing swapped engine. These mounts are machined from 1/4 in. steel and are MIG-welded for ultimate strength. They will mount the LSX engine to the G-body but, depending on your accessory applications, the crossmember may need alteration to properly fit with your A/C and certain oil pans.
( 3 )
$149.99
$134.99
On Sale
If you're going to be running 10.99 seconds or quicker in NHRA, you must have at least a 10-point roll cage. If you currently have an 8-point roll bar installed, one of Competition Engineering's 10-point roll bar conversion kits will upgrade your 8-point bar to a 10-point cage. These weld-in kits consist of a top hoop, which attaches to the front of the existing roll bar and follows the perimeter of the roof, plus two supports for the front of the top hoop. Both the top hoop and the supports are made from rugged, 1 5/8 in., 0.134 in. wall, computer mandrel-bent, mild-steel tubing. Even if you aren't required to have a 10-point cage, upgrading your existing 8-point bar will add protection, as well as chassis stiffness that can translate into better reaction times.
( 6 )
$220.99
$198.89
On Sale
Clearance
Standard Motor engine variable timing sprockets will restore your vehicle's drivability. Designed to match OE performance, these SMP units are precision-machined to ensure accurate variable valve timing and correct rough idle. And, once installed, the cam phasers can help to reduce emissions and improve vehicle efficiency. Choose quality parts to get the job done right the first time; choose Standard Motor engine variable timing sprockets.
( 8 )
$111.99
—
$201.99
$100.79
—
$181.79
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$379.95
—
$399.95
$208.95
—
$247.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
