Availability
Showing In Stock Items. Show All 38 Items.
On Sale
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$780.15
$702.14
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 143 )
$649.95
—
$849.95
$552.95
—
$693.95
On Sale
Shutting down your vehicle's fuel-saving cylinder deactivation system has its advantages. If your AFM lifters are failing or if you're doing performance upgrades, Summit Racing™ offers cylinder deactivation delete combo Pro Packs that will allow your vehicle to run on all cylinders and have full power at all times. Select the kit designed for your vehicle. Cylinder deactivation delete Pro Packs include: * ICT Billet LT lifter valley covers * Summit™ Performance LS7 hydraulic lifters * Summit™ lifter guides * BTR Gen V LT VVT cam timing bolts * ACDelco crankshaft front seal * ACDelco water pump gaskets * Mahle head gasket set * Fel-Pro head bolts * ACDelco harmonic balancer bolts
Not Yet Reviewed
$777.89
$762.89
On Sale
BTR connecting rods are state-of-the-art 4340 H-beam rods for your build. They feature heat-treated, stress relieved, and shot peened bodies with bronze bushed pin bores, and the cap and rod are serialized at the parting line to ensure proper mating after disassembly. BTR inspects them for bearing housing and pin bore diameter, bend/twist, and C/L length. Additional features and benefits: * They are pre-torqued with high-pressure lube and ARP 2000 bolts * Sets of 8 are matched within 2 grams overall * The rods weigh in at approximately 665 grams * Laser marked on the beam with the BTR logo * Rods are individually bagged and sealed
( 2 )
$759.99
$683.99
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$573.95
$515.95
On Sale
Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today
( 34 )
$849.95
$763.95
On Sale
Heading offshore? Go with Scorpion Endurance marine rocker arms. They have the stamina to get the job done in your powerboat racing engine. These marine rockers are designed to fit under stock height valve covers with no interference and can easily handle a .950 in. lift and 950 lbs. of open spring pressure. Scorpion rocker arms are micro-polished to endure over a long period and are anodized for additional protection, as well as great aesthetics. Choose your ratio and gain the stamina to sting your competition with Scorpion Endurance marine series rocker arms. Additional features include: * Lightweight design with short polylocks * Needle bearing fulcrum and roller tip * Centerless-ground trunnion * Ground pin and roller * Burr-free trunnion through hole * Large machined seat * Solid steel pedestals * Black oxide coated steel parts * 100 percent CNC machining
( 5 )
$587.46
$511.09
On Sale
"Bolt and go" is hard to believe, and yet the tech-savvy people and operations at Scorpion offer the only direct bolt-on--the LS Race Series rocker arms. You won't have to change your valve covers. These amazing aluminum rocker arms use factory bolts and are torqued to factory specifications. They possess all of the great quality features offered on all Scorpion rocker arms, like solid steel pedestals and black oxide coated steel parts, and they are 100 percent CNC-machined. Scorpion LS Race Series rocker arms are the quietest on the market and can be installed by the garage guy with know-how. Bolt on a set of Scorpions and sting your competition with LS Race Series rocker arms.
( 11 )
$589.88
—
$775.77
$513.20
—
$674.92
On Sale
Sting the competition with the full-body design of Scorpion Race Series roller rocker arms. They're precision-crafted via high-tech manufacturing methods, then fully CNC-machined. These rockers offer more clearance for retainers and springs, and can easily handle .950 in. lift and 950 lbs. of open spring pressure. The surfaces are micro-polished and anodized for looks, protection, and maximum durability. Scorpion rocker arms are available in nearly 200 fitment options; order the set recommended for your application. More speed for your high performance passion! Additional features include: * Aerospace-grade 7000 Series aluminum for maximum strength and durability * Needle bearing fulcrum and roller tip * Precision-ground needle bearings * Centerless ground trunnion, ground pin, and roller * Burr-free trunnion through hole * Directed oiling * Large machined seat and thick-walled adjusting nut (polylock) * Pedestals machined from solid steel * Black oxide coated steel parts * 1.600 in. fulcrum width * Clear 1.625 in. O.D. valve springs
( 212 )
$775.77
$674.92
On Sale
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$689.00
—
$837.00
$620.10
—
$753.30
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$599.95
$538.95
On Sale
JE Pistons big block open chamber dome top pistons are an excellent choice for drag race applications. Their compression height is figured using a 9.780 in. block height with zero deck clearance. The pistons include a pin, double Spiro locks, and double pin oilers. Their precision CNC-machined ring grooves will accept 1/16, 1/16, 3/16 rings.
( 4 )
$749.99
$674.99
On Sale
Manley steel H-beam connecting rods are made from forged 4340 steel alloy. They're packed full of performance features, such as a compact uniform-grain structure for ultimate strength, full machining, stress relieving, and magnafluxing. The wrist pin and big end bores are honed to a +/-.0002 in. tolerance, and the wrist pins get a bronze alloy bushing. These units include cap screw ARP 8740 alloy rod bolts, and each rod set is weight-matched to within 2 grams. Available individually or in a set, order the model recommended for your vehicle year/make and engine application.
( 8 )
$744.28
—
$775.52
$707.07
—
$736.74
On Sale
COMP Cams FSL hydraulic roller camshafts offer drop-in convenience—with no valve spring changes or computer tuning required—for the LS3 engine family. The FSL cams provide proven 32 rwhp improvement without the risk of non-compliance with emissions regulations. COMP Cams FSL hydraulic roller camshafts work with stock components and a stock tune to produce an increase in peak power. Order the model designed for your vehicle/engine application.
( 1 )
$649.95
$519.96
On Sale
Holley M/T valve covers are flashbacks to 1972. Nothing was cooler than cruising in your hot rod with a Holley double pumper and M/T finned aluminum valve covers. Each Holley M/T valve cover is precision-manufactured with knockout plugs for stock PCV and oil fill installations. These covers feature polished top cover surfaces that may be used for engraving your name horizontally next to the deep heat dissipating fins. Available in your choice of black crinkle or a polished finish, each Holley M/T valve cover comes in retro packaging styled after the original. Order the pair designed for your engine application.
( 30 )
$599.95
$538.95
On Sale
Holley modular LS Pontiac-style valve covers feature an OE height, internally-baffled base with integrated coil mounts for popular Gen I and Gen V-style LS coil bodies. The overcovers hide the unsightly LS coils and messy wiring harness—allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simulated oil fill cap which helps maintain the original Pontiac styling. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness, so no extensions or custom wiring is required. Holley's 2-piece LS Pontiac-style valve covers offer a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation! More product features and items include: * Available in various finishes * Base fits LS1, LS2, LS3, LS6, and LS7 engines with clearance for 0.750 in. lift cam with stock style rocker arms * Base features internally baffled ventilation system * Each 2-piece LS valve cover set includes a low-profile billet oil fill cap, 2 billet simulated fill cap assemblies, hardware, and spacers for mounting both versions of LS coil bodies * Dress-up hardware and rubber grommets for the coil covers
( 1 )
$586.95
$527.95
On Sale
Holley's 2-piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies, and a Ford style overcover that hides the unsightly LS coils and messy wiring harness. This allows the full performance benefits of coil-on-cover ignition setups without the robotic styling. These coil covers also feature cast-in provisions for the spark plug boots and coil wiring harness, so no extensions or custom wiring is required. Each 2-piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, plus dress-up hardware and rubber grommets for the coil covers. The modular LS valve covers are available in three custom finishes: natural cast, polished, and satin black. Features: * Cast aluminum 2-piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies * Retain the performance of factory coil-on-cover ignition without the unsightly styling * Coil cover features vintage Ford valve cover styling and cast-in wiring provisions * Base fits LS1, LS2, LS3, LS6 and LS7 engines with clearance for .750 in. lift cam with stock-style rocker arms * Base features internally baffled ventilation system * No coil relocation, wire harness extensions, or custom spark plug wires required * Includes low-profile billet oil fill cap * Includes all necessary coil mounting provisions and dress-up hardware
Not Yet Reviewed
$573.95
$515.95
On Sale
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 28 )
$631.95
—
$704.95
$505.56
—
$563.96
On Sale
BTR Platinum valve spring kits are dual-spring kits, highly recommended when upgrading to an aftermarket camshaft. Each assembly was created to fill the need for high performance—and comes with quality dual-valve springs, titanium or chromoly retainers, locks, seals, and locators for stock or bronze guides. Build a better high performance cam with BTR valve spring kits! Order the material and stem seal color you prefer, and the model recommended for use with your engine application.
( 16 )
$619.99
$557.99
On Sale
These Manley NexTek valve springs are better-designed valve springs using state-of-the-art machinery for purpose-built racing engines. They're manufactured from super-clean, high-tensile chrome silicon steel and are shot-peened to MIL specs for maximum fatigue life. They feature a proprietary, multi-step heat-treating that minimizes load loss and have computer-aided modeling to minimize valve bounce and valve gear separation. The Manley NexTek valve springs are smaller diameter and lightweight, allowing engines to rev higher faster. They have an extended tip thickness designed to eliminate overload breakage, and their tightly controlled open-end flatness reduces valve stem side loading.
( 4 )
$645.49
$613.22
On Sale
Get your project on the street quicker with a convenient Summit Racing™ LS front drive serpentine kit. Our selection offers options to fit your application with components that perform above your expectations! We select the pulleys, brackets, and hardware, as well as A/C compressors, alternators, and even belts (depending on the kit chosen) to get your LS-powered project moving. So, when it comes to saving time and money, why go anywhere other than Summit Racing™?
( 1 )
$605.92
—
$624.92
$578.72
—
$597.72
On Sale
Manley Platinum Series pistons are designed to provide trouble-free installation, excellent reliability, and maximum horsepower for your application. Available in 2618 and 4032 forgings, they provide the optimum balance between strength and weight, with no grain-interrupting internal milling. The Platinum Series pistons' 2618 alloy offers maximum high-temperature strength and fatigue resistance, while the 4032 alloy is ideal for moderate-horsepower street applications. Order the style and size pistons designed for your vehicle and engine.
( 6 )
$713.63
—
$830.30
$677.95
—
$788.79
On Sale
Waterman Racing complete belt drive kits include the bracket assembly, fuel pump pulley, crankshaft mandrel assembly with pulley, belt and hardware for installation. The kits are designed to mount a fuel pump on either the driver or passenger side on a Chevrolet small block or big block engine. Order the belt drive kit recommended to fit your application.
Not Yet Reviewed
$699.99
$629.99
On Sale
Brian Tooley Racing and Wiseco have formed a partnership to bring an affordable piston to market for LS engines. Constructed from 2618 forged aluminum, BTR pistons give the consumer options for stock floating pin or aftermarket connecting rods, and stock 3.622 in., 3.625 in., or 4.000 in. crankshaft strokes for a wide variety of applications. Included in the set are .927 piston pins and spiro locks for all 6.125 in. rod applications, while .943 piston pins and OEM-style wire clips are included for all 6.098 in. (stock) rod applications.
Not Yet Reviewed
$649.99
$636.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
