Availability
Showing In Stock Items. Show All 52 Items.
ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor
( 10 )
$5,049.99
These ATK High Performance Chevy LS 408 short blocks are made to handle some serious power. The foundation of any high performance engine is a rock-solid short block, so ATK designed and developed these to be just that. They feature a fully forged, balanced, and blueprinted rotating assembly that is available in a variety of configurations to fit naturally aspirated, nitrous, and forced induction builds, as well as those with 24 and 58-tooth cranks. These ATK High Performance Chevy LS 408 short blocks include the following: * GM LS Iron blocks * Aligned and hone main bores * Manley 4340 forged crankshaft * 4.00 in. stroke * Manley 4340 H-beam connecting rods * Manley forged pistons
( 4 )
$5,143.99
ATK High Performance GM 350 390 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 350 390 hp complete long block engines consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * OE powder metal connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go Street Electronic fuel injection 400hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$5,398.99
Pack Vortec power and stroker torque in your ride with ATK High Performance GM 383 Vortec 390 hp Stage 3 long block crate engines. These engines are hand-built and balanced to ensure a strong-running, reliable engine for your daily driver or hot rod. The 460 ft.-lbs. of twist make these extremely versatile mills that are at home in a towing rig, muscle car, or street rod. Get back out on the road with the ground-pounding power that only a stroker can give you. Engine specifications: * HP: 390 * TQ: 460 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.750 in. * Displacement: 383CI * Crankshaft: Scat nodular iron external balance rear of crank/internal balance front of the crank * Rods: Scat I Beam 5.7 in. rods with ARP 8740 bolts * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Dart vortec cast iron 67cc/165cc 2.02/1.60 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 (with scat kit) * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
Not Yet Reviewed
$5,998.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LQ4 6.0L 535 hp base long block crate engine is fitted with LS3 heads. Engine specifications: * Horsepower: 535 * Torque: 485 * Block: OE LQ4/LQ9 6.0L iron * Bore/stroke: up to 4.030 in. x 3.622 in. * Displacement (cu.in): up to 371c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- ATK LS3 rectangular port aluminum -- 69cc/255cc -- 2.160 in. intake/1.600 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
Smash the competition or terrorize the street with ATK High Performance GM 540 660 hp Stage 3 long block crate engines. They are built around a rock-solid bottom-end and a free-breathing top-end to create a beast that is capable of 660 hp and 690 ft.-lbs. of tire-shredding power. ATK hand-assembles each of these mills out of top-of-the-line components to make them strong enough for the track, but reliable enough for street use, so you get the best of both worlds. ATK GM 540 660 hp Stage 3 crate engines include: * Dart Big M block * High performance aluminum cylinder heads * Intake manifold * Carburetion * 4340 forged steel crankshaft and H-beam connecting rods * Forged pistons * Hydraulic roller camshaft * Cam lift- .640 int./.640 exh. * Cam duration @ 0.50- 243 int./249 exh. * 10.0:1 compression * Distributor, plug wires, plugs * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
Not Yet Reviewed
$14,998.99
ATK High Performance Chevy 632 short blocks are based on dyno proven combinations built with name brand parts. Each short block is hand-built and inspected for precision tolerances. Rotating assemblies are balanced; and stroker builds are oversize of stock bore and stroke. Short blocks are shipped strapped on a wooden pallet crate. Engine Specifications: * Block: Dart Big M Sportsman 4-bolt main 2-piece rear main seal * Bore/Stroke: 4.600 in. x 4.750 in. * Displacement: 632CI * Crankshaft: Scat 4340 forged internally balanced * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: 2618 forged +3.4cc flat tops * Compression ratios: 112cc = 11.3:1 / 118cc = 10.8:1 / 121cc = 10.6:1 (can vary due to deck height/gasket thickness) * Rings: Plasmamoly * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed Recommended Components: * Balancer: Internal balance * Flexplate / Flywheel: Internal balance * Head gasket: .038 in. or per application Engine Info: * Oil: 10W30 Conventional / Non-Synthetic for first 3,000 miles * Oil filter: Wix or K&N per application * Head gaskets: .038 in. or per application
Not Yet Reviewed
$7,526.99
ATK High Performance GM 383 Stroker 525 hp Stage 1 long block crate engines are power transplants for your high performance projects. ATK Stage 1 or base engines are designed for builders that have their own component parts already, and who are interested in completing out the build themselves. GM base engines typically consist of the following: short block, camshaft, timing set, cylinder heads, valve covers, timing cover, oil pan, oil pump, and pick up tube. Engine specifications: * Horsepower: 525 * Torque: 515 * Block: OE roller block 4-bolt main one-piece seal 1996-2000 * Bore/stroke: 4.040 x 3.750 in. * Displacement: 383 * Crankshaft: Scat 4340 forged external balance rear of crank/internal balance front of the crank * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.2:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 246/250 at 50 .603intake/.609exhaust 110LSA * Timing chain: Double roller * Cylinder heads: ATK American-made aluminum 70cc/210cc 2.02/1.60 * Rocker arms: Billet aluminum 1.6 roller rockers * Oil pan: Moroso 7qt. with windage tray * Oil pump: Melling * Flexplate/flywheel: Pioneer external balance 168 tooth (with Scat kit)
Not Yet Reviewed
$7,198.99
ATK High Performance Chevy Gen V LT1 416 short blocks are built for naturally aspirated engines, boost or nitrous. ATK starts with a new GM LT block and outfits it with a Manley 4340 forged crankshaft, H-beam rods with ARP2000 bolts, Manley 2618 forged pistons, and Total Seal CS AP ring package with steel top rings. These short blocks will have the factory piston squirters plugged. Engine Specifications: * Block: New GM LT1/LT4 * Bore/Stroke: 4.065 in. x 4.000 in. * Displacement (cu.in): 416 c.i.d. * Crankshaft: Manley 4340 forged 58-tooth reluctor wheel * Rods: Manley 4340 forged H-beam 6.125 in. ARP 2000 bolts * Pistons: Choice of 2618 forged +10cc or +20cc dished * Rings: Total Seal CS AP steel top ring with Napier 2nd ring set * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed Recommended components: * Balancer -- Internal balance * Flex plate / Flywheel -- Internal balance * Head gasket: .051 in. or per application * Oil pump: Factory Engine Info: * Oil: 5W30 non-synthetic for first 3,000 miles * Oil filter: Wix or K&N, per application
Not Yet Reviewed
$6,998.99
ATK High Performance GM 383 Stroker 415 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 415 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * Scat nodular iron crankshaft * Scat I-beam connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$6,098.99
ATK High Performance GM 383 Stroker 415 hp Stage 3 long block crate engines are the perfect choice to drop in your ride if you're looking for some stroker power without breaking the bank. They are made of high-quality name brand parts at an affordable price and are perfect for getting your ride back on the road. ATK long block crate engines include: * Intake manifold * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Carburetor * Distributor * Oil pan * Valve covers * Timing cover * Water pump * Harmonic balancer * Spark plugs * Spark plug wires
Not Yet Reviewed
$5,569.99
ATK High Performance GM 383 Stroker 500 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 500 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * 4340 forged crankshaft * 4340 forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$8,198.99
ATK High Performance GM 383 Stroker 435 hp Stage 3 long block crate engines with EFI are designed for better driveability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 435 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Dart SHP aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
( 1 )
$7,098.99
ATK High Performance GM 365 LQ4 550 hp Stage 1 long block crate engines offer streetable horsepower producing big mid- to upper-end power with a noticeable idle. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 365 LQ4 550 hp base engines consist of: * 6.0L iron LQ4 Gen III block * ATK reground crankshaft * Forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * OE rocker arms with trunnion upgrade * Timing set
Not Yet Reviewed
$7,798.99
ATK High Performance Pro Street 632 c.i.d. 800 hp completely dressed crate engines are sure to turn heads! Hand built; they are stuffed with name brand quality components you can trust to ensure performance. Engine specifications: * Block: Dart Big M 10.2 deck, 4-bolt main, 2-piece seal * Bore/stroke: 4.600 in. x 4.750 in. * Displacement: 632 * Crankshaft: Scat 4340 forged internal balance * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.3:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 267/277 at 50 .680 intake/.680 exhaust 110LSA * Timing chain: Double roller * Cylinder heads: Dart Pro 1 aluminum 121cc/345cc 2.300/1.880 * Rocker arms: Howards billet aluminum 1.7 roller rockers * Oil pan: Moroso 7 qt. street/strip pan with windage tray * Oil pump: Melling high volume * Balancer: Power Bond SFI 7.950 in. * Intake manifold: Edelbrock Super Victor * Distributor: Pro billet (iron gear) * Carburetor: Quick Fuel 1150 cfm mechanical secondary * Spark plugs: Autolite #3934 * Spark plug wires: 8mm
Not Yet Reviewed
$16,499.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp base long block crate engine is fitted with AFR heads. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
—
$5,556.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
Big power requires a solid foundation, so start your next build with one of these ATK High Performance Chevy 540 Dart Race Series short blocks. These short blocks are built, balanced, and blueprinted to be the strongest and most reliable short blocks available for your race car or hardcore street car. Features: * Dart Big M 9.8 block * Aligned and honed main bores * 4340 forged crankshaft * 4.25 in. stroke * 4340 forged H-beam connecting rods * Forged -10cc dome pistons
Not Yet Reviewed
$7,626.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
