Availability
Showing In Stock Items. Show All 86 Items.
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 584 )
$267.99
—
$394.99
The 1967-69 F-body was designed in an era when high performance driving and modern tire technology weren't as prevalent. Their unibody chassis, while innovative at the time, can flex and twist under stress, particularly when cornering aggressively or accelerating hard. QA1's bolt-on subframe connectors offer a simple and effective solution to this common issue. They tackle the flex issue by increasing frame rigidity, leading to a significant improvement in handling performance—especially during cornering, acceleration, and braking. The tubular design connects the front Camaro/Firebird subframe to the rear subframe, providing additional structural support and stiffness to the chassis. Additional details: * Included solid body mounts and hardware further reduce chassis flex. Their aluminum construction offers a noise-free alternative to polyurethane. * Thoughtful design: The QA1 subframe connector contours to follow the body lines for a factory-like look without sacrificing ground clearance. * Easy bolt-in installation makes the upgrade hassle-free. * Fitment notes: Does not fit convertibles.
( 1 )
$509.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$349.95
—
$449.95
Rust Buster fuel tank crossmembers are designed as a frame repair component, strategically sized to install in place of the factory fuel tank crossmember to provide essential reinforcement to your vehicle's frame. This repair section is designed to seamlessly integrate into your vehicle's frame, while enhancing its overall structural integrity. The fuel tank crossmembers are constructed from premium thick steel, providing exceptional strength and resilience. The bare finish not only showcases its robustness but also allows for customization to suit your aesthetic preferences. The installation process is straightforward with its cut-out and weld-in installation type. To safeguard against rust and corrosion during shipping, this replacement part comes with a rust-preventative oil coating. Order the fuel tank crossmember designed for your application.
Not Yet Reviewed
$269.99
—
$379.99
BMR subframe connectors are some of the strongest in the industry. Their innovative design ties together key structural points across the floorpan, minimizing flex. BMR subframe connectors are fabricated from heavy-duty, rectangular tubing for frame rigidity and improved handling ability.
( 65 )
$319.95
—
$519.95
Rust Buster frame repair sections help you replace those rusted or damaged frame rail areas on your truck or SUV. The EZ slip design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. Rust Buster uses the latest in CAD to model each repair section before it is laser-cut, formed and finish welded. Keep your ride on the road for years to come with Rust Buster frame repair sections.
( 29 )
$269.99
—
$429.99
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$418.95
$272.95
—
$449.95
UMI Performance boxed weld-in subframe connectors are necessary chassis upgrades when racing and hard driving habits are present. UMI Performance boxed weld-in subframe connectors greatly improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter-panel flexing. Subframe connectors essentially tie the front and rear steel subframes together, resulting in a stiffened and strengthened chassis, allowing for better weight transfer and improved traction when launching. When strength is a concern, square tubing has greater torsion resistance over tubular designs. They will work with all aftermarket exhaust systems and will not affect ground clearance. Their weld-in style requires no bolts to tighten and offer less chance of flex when compared with bolt-in types.
( 23 )
$399.99
—
$449.99
The more improvements you do to the vehicle, the more demands are put on the body. These Global West subframe connectors provide additional support to increase the integrity of the chassis. They are a must for any performance application. They're built out of round 1 5/8 in. x .125 in. wall roll cage tubing. The construction attaches to the factory support rails located directly under the front seats. The rear portion of the subframe attaches to the rear leaf spring mount and frame rail. Additional gussets are included in the kit, which add support to the rear spring mount. Welding is required for installation.
( 97 )
$350.75
Dorman offers spare tire crossmembers for a variety of applications, including many Chevy and GMC vehicles from 2001 and up. These OE replacements can be swapped in for original parts that are damaged by corrosion or impact. Machined from steel for reliable, long-lasting service, the crossmembers match factory dimensions for an accurate and true frame repair. Each part has undergone vehicle try-on, material, and corrosion testing to ensure proper fit and performance.
Not Yet Reviewed
$263.99
Doug's Headers offers engine swap transmission crossmembers for a variety of classic Chevrolet and GMC applications. They are CAD-CAM designed, welded steel with a durable black powdercoat finish for proper fit, strength, and appearance. Ideal for 2WD trucks with GM LS and LT engines, one part number fits with ALL popular late-model manual and automatic transmission swaps. The crossmembers come complete with necessary hardware and detailed instructions. Notes: * Designed to clear up to 3 in. exhaust systems with no loss of ground clearance * Designed for use with Doug's Headers line of LS engine swap products
( 5 )
$279.00
—
$335.25
UMI Performance front reinforcement braces reduce squeaks and rattles common with the GM G-body platform. This welded steel tubing will stiffen the front frame horns and front crossmember area, and no drilling is required for installation. Grade 8 hardware is included to easily bolt the triangular brace onto your chassis. UMI front reinforcement braces are designed and manufactured with pride, and are available in your choice of powdercoat colors.
( 11 )
$294.21
—
$297.18
Strengthen your transmission support and reduce the weight of your vehicle with Summit Racing™ lightweight transmission crossmembers. Through advanced design and manufacturing, these crossmembers are stronger than standard boxed-steel transmission crossmembers, while weighing an average of 35-percent less. The crossmembers are a direct bolt-in and do not require any additional brackets or adapters to complete the installation. They also allow you to run a true dual-exhaust system with most popular GM transmissions and do not affect ground clearance. The welded design with clear powdercoat finish gives these lightweight crossmembers a fabricated look that's sure to complement your ride. Order the model recommended fit your application.
( 13 )
$329.99
Alston Racing bolt-on subframe connectors are carefully formed to fit the contour of your vehicle's stock unit body floor. No cutting or welding is required for installation, allowing you to retain your stock exhaust, fuel, and brake lines. In about four hours, you can preserve the consistency and performance of your uni-body chassis. Additional features of Alston Racing bolt-on subframe connectors include: * Easy installation * Complete with Grade 8 hardware and instructions * Powdercoated to ensure long life and good looks * Can also be welded in
( 24 )
$297.00
—
$356.00
Hotchkis Sport Suspension Convertible X Brace supports will add rigidity to your vehicle's chassis by replacing the factory frame brace. As an added benefit, they also allow for the use of larger-tube exhaust systems, which will often require the removal of the factory brace anyway. These fabrication-designed braces feature extra reinforcing gussets and a laser-cut HSS logo. Get your fabrication on with an assist from Hotchkis Sport Suspension Convertible X Brace supports!
( 16 )
$299.99
American Powertrain X-Factor crossmembers offer half the weight of traditional crossmembers—with all of the strength. Designed to fit with most muscle car platforms and the latest transmissions, X-Factor aluminum crossmembers are 1,000 hp strong and feature a powdercoat finish for added durability. They're available for a variety of vehicle and transmission applications.
( 34 )
$279.95
—
$419.99
Detroit Speed weld-on subframe connectors join your front subframe and rear frame rails to increase your car's stiffness. These uniquely designed DSE connectors are fabricated from thick-wall rectangular steel tubing. They are bent and TIG-welded in a fixture for accuracy and repeatability. Unlike others, these DSE subframe connectors are barely visible from underneath the car, offering maximum ground clearance. Plus, they won't interfere with seat attachment hardware or the installation and removal of the rear leaf spring pocket. And, your molded factory carpet will still fit over the subframe connectors. Detroit Speed weld-on subframe connectors can be installed on convertibles and are supplied with templates, pictures, and detailed instructions for installation.
( 1 )
$305.95
—
$349.95
UMI Performance tubular subframe connectors are designed to tie the front and rear subframes together using bolt-in hardware supplied and they require no welding! Subframe connectors improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Their setup tucks tightly against the floor using strong tubing, causes no ground clearance loss, and cannot be seen from the side of the vehicle. Additional features include: * Constructed from chromoly or mild steel tubing * Front mounting points feature 0.250 in. thick mild mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * Tubular design allows for a tighter fit against the vehicle's undercarriage * Uses rear control arm mount for increased strength and ensures proper installation * MIG-welded construction * Durable powdercoated finish
( 39 )
$340.38
—
$349.99
BMR transmission conversion crossmembers allow you to swap your choice of transmissions into your vehicle. They bolt to your OE frame points using existing mounting holes with no welding or drilling required.
( 21 )
$259.95
—
$449.95
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 38 )
$269.99
Trans-Dapt Performance crossmembers eliminate the need to fabricate a rear crossmember. Their vehicle-specific transmission crossmembers are available as kits, with braces and mounting pads, or as the crossmember alone. Position your engine and transmission properly and exactly where you need them with quality, durable crossmembers from Trans-Dapt.
( 111 )
$255.99
—
$311.99
BMR torque arm relocation kits allow you to move the torque arm mount to reduce the stress on the tailshaft. These kits replace your transmission crossmember with a stronger tubular piece that also has an integrated torque arm mount. The mount itself is adjustable up and down to allow for easy "instant center" adjustment. They are made from heavy-wall DOM tubing and 1/4 in. mounting plates and hardware are also included.
( 17 )
$259.95
Turn to the pros at Auto Metal Direct to provide the best OEM replacement parts on the market. Their rear frame rails are made from quality, heavy-gauge steel with a long-lasting, durable black powdercoated or EDP finish. Each piece is built to original OE specs and has been test-fitted by the restoration technicians at Auto Metal Direct. The frame rails are available in a variety of configurations for fitment on many classic vehicles. Order the model needed for your application.
( 14 )
$309.99
Competition Engineering formed rear frame rails adds some beef to your suspension. The "chassis people" have designed and manufactured these to replace the stock sheet metal rear rails in your subframe equipped car. CE's rails are mandrel-formed 2 in. x 3 in. x .083 in. wall mild steel tube that will increase the chassis strength for quicker vehicle reaction times. Plus, they have been engineered to move the leaf springs and frame rails inboard to provide additional tire clearance. Strengthen your suspension to put more power to the pavement utilizing a pair of Competition Engineering formed rear frame rails. Additional information: * Designed to fit stock floor contours with minor fabrication * Requires use of a fuel cell, rear fenderwells and an upper shock crossmember * Use with Competition Engineering weld-in subframe connectors * Two rails and hardware per kit
( 16 )
$388.99
—
$430.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
