Availability
Showing In Stock Items. Show All 35 Items.
"The cooling is in the copper." Johnson's Radiator Works engine swap radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock
( 3 )
$1,275.00
—
$1,400.00
AFCO Racing S-10 small block V8 engine swap radiators feature two rows of 1 in. tubes to keep your V8 running cool. Don't risk your engine overheating by using other S-10 radiators that use only a single-row core, instead, for more reliable performance use one of these S-10 small block V8 engine swap radiators by AFCO Racing. Installation is easy and uses rubber isolated pins for mounting the radiator in the stock core support. AFCO Racing S-10 small block V8 engine swap radiators feature: * Built-in mounting brackets * Inlets and outlets are in the correct locations * Billet filler neck offers strength and higher quality appearance over stamped * 100 percent aluminum construction (no epoxy) * Furnace-brazed core—two rows of 1 in. diameter tubes
Not Yet Reviewed
$1,234.99
Meziere high-flow mechanical water pumps may have a show quality appearance on the outside, but they're race bred inside! These high flow mechanical water pumps have already proven to be a great success in many forms of racing, including off and on-road endurance. Top end figures match the best racing pumps on the market and off idle flow is 5 to 7 GPM higher than any competitors. These high flow pumps have an all billet body construction and impeller provides tight clearances for excellent flow characteristics. Available for small block Chevy (standard and reverse rotation) and small block Fords, Meziere high flow mechanical water pumps really deliver on top end performance!
Not Yet Reviewed
$1,185.16
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$1,599.99
On Sale
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 17 )
$1,483.99
—
$1,711.99
$1,335.59
—
$1,540.79
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 15 )
$1,417.99
—
$1,470.99
Meziere 300 Series electric water pumps are the Big Daddy of electric water pumps. They're capable of flowing 55 gpm--enough for a 600 hp oval track car or a 2,200 hp Pro Mod. They have larger internal passages and heavy-duty motors and are available in radiator, remote mount, or engine mount versions. These pumps feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal.
( 82 )
$1,005.02
—
$1,149.23
On Sale
DeWitts engine oil cooling kits are "air-to-oil" type EOC kits for specific vehicles. Each kit contains a custom 2-pass oil cooler designed to mount directly behind the grill opening and replaces the factory water-to-oil cooler with a custom adapter. Available in 180- or 212-degree thermostat kits, both include detailed installation instructions. Choose the kit right for your application.
Not Yet Reviewed
$1,289.99
$1,160.99
Improved Racing performance oil cooler kits add massive cooling capacity under your hood. Oil temperatures in track conditions often reach as high as 300 degrees F with the factory setups. These coolers will lower peak oil temps by as much as 30 to 50 degrees F. And—the kits are not only essential for track use, but also perfectly streetable! A built-in thermostat allows engine oil to reach safe operating temperatures much faster than the factory cooling systems. Constructed from plate aluminum, the bolt-on coolers are available for a variety of applications—including Corvettes from 2005 and up.
Not Yet Reviewed
$1,199.00
On Sale
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 237 )
$1,258.00
—
$1,663.00
$1,132.20
—
$1,496.70
AFCO Racing LS swap direct-fit radiators are built with the correct inlet and outlet required for the engine swap. They are 100 percent TIG-welded, 100 percent pressure tested and use no epoxy or sealers. These double pass radiators were designed for the rigors of racing, but AFCO added the mounts to allow their superior design on the street. After all, there are more important things to be doing than installing your radiator—like enjoying your truck the way it was intentionally built for—to be driven! AFCO Racing LS swap direct-fit radiators feature: * All aluminum construction * Billet filler neck offers strength and higher quality appearance over stamped * Uses the same tools to install your new radiator as you did to remove the old one * Factory fan shroud provisions on many models * Available with optional fan and shroud assemblies * TIG-welded by skilled craftsmen * Properly positioned inlets and outlets for ease of flow * Drain plugs included
( 3 )
$1,096.99
—
$1,453.99
It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays
( 8 )
$1,499.99
On Sale
Summit Bucks
Restore and enhance your cooling system with a Mishimoto Performance Radiator Essentials Bundle. The bundles include high-quality upgraded cooling components to replace items Mishimoto found to be the most failure-prone. Kits feature an aluminum radiator, silicone radiator hose kit, high- and low-temperature thermostats—plus other components (depending on the bundle you select). The Performance radiator features full aluminum construction with durable TIG-welded end tanks. In addition, it's designed with a massive two-row 2.2 in. thick core, which provides substantial improvements in cooling efficiency. The radiator hose kit is constructed from four layers of silicone with heat-resistant embedded fibers. This combination of materials provides substantially improved heat and pressure tolerance compared to the stock rubber hoses. In addition, the kit includes a CNC-machined aluminum quick-disconnect fitting, providing a considerable improvement in durability over the stock plastic unit. Rounding out the basic Essentials Bundle is a pair of thermostat sets; high-temperature thermostats hasten engine warmup, making it ideal for use in cold climates. The low-temperature thermostats have a lower activation temperature compared to the factory thermostat. Lower activation temperature allows coolant to flow through the engine earlier, reducing the risk of overheating in hot environments. Order the bundle with components preferred for your vehicle.
Not Yet Reviewed
$1,494.95
$1,345.46
On Sale
Summit Bucks
Mishimoto performance radiators are designed and engineered to maximize cooling efficiency, boost engine functions, and, most of all, protect your engine from overheating. Many stock radiators can't handle the additional heat that comes higher horsepower levels. So, swap out your stock radiator for an all-aluminum Mishimoto. Key features and benefits of Mishimoto performance radiators include: * Available for universal and exact fit applications (no cutting or modifications required) * All-aluminum construction for optimal heat dissipation, improved strength, and reliability * Increased cooling capacity due to their massive core size * 100 percent brazed aluminum core for minimal distortion, low stress, and clean joints * Available in various sizes with 2-row or 3-row cores * TIG-welded for clean, strong welds and increased durability * Magnetic drain plugs capture metallic debris or fragments * Included high-pressure 1.3 bar cap raises the coolant boiling point for greater safety and efficiency * Automatic transmission and accessory coolers included where applicable
( 334 )
$1,561.95
$1,405.76
On Sale
DeWitts' restoration copper and brass radiators are built with the same technology and precision that define their direct-fit aluminum radiators. These reproductions include the "Harrison" embossment and factory-type channels, just like the original equipment. So if you're restoring a classic sports car or are interested in running your engine at cooler temps, order the DeWitts replacement radiator model designed to fit.
Not Yet Reviewed
$1,589.99
$1,430.99
On Sale
DeWitts LS Modified Direct Fit Pro-Series radiators are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Over a hundred models are available (crossflow or downflow) for vehicles from the 1950s, '60s, '70s, and '80s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 4 )
$1,150.99
$1,035.89
For heavy-duty vehicles that are under extreme conditions or high mileage, you need to go beyond the OE specifications to have a product that will perform and go the distance. With a goal to always meet or beat OE quality standards, OSC Automotive Heavy-Duty radiators are designed and engineered with consistent attention to Quality Control, as well as extensive research and development. OSC also understands that it is very important that each part goes in as easily as the existing one comes out. So, their HD radiators provide a drop-in fit that looks and functions like the original unit. Choose the replacement HD radiator made for your commercial truck. Key features and benefits: * Many models have a welded double header design--reduces flexing * All "tabbed-over" models have a second crimp strip * Most applications come with mounting hardware * Superior stainless steel coolers replace OE aluminum * More than 50 models available with frames * Over 450 part numbers covering Class 8 trucks and forklifts
( 1 )
$1,021.99
On Sale
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 40 )
$1,483.99
—
$1,685.99
$1,335.59
—
$1,517.39
On Sale
DeWitts Pro-Series direct-fit aluminum radiators provide a 25 percent increase in cooling performance. They include features like two rows of one-inch wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—and they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 166 )
$1,155.99
—
$1,208.99
$1,040.39
—
$1,088.09
PWR North America radiators are a revolutionary advancement in cooling technology. These aluminum radiators feature a reinforced race fin design cross-braced for maximum strength and durability, and they have a unique shape with a hemmed leading edge for additional cooling and maximum durability. Developed using PWR North America's current F1 and NASCAR cooling technology, PWR's cores provide unmatched performance. You too can now have the same cooling technology for the street as many top-podium motorsports champions use week-after-week with PWR's radiators. Select the radiator for your application and discover the PWR difference!
Not Yet Reviewed
$1,395.00
AFCO Racing offers a comprehensive line of bolt-in direct fit aluminum radiators in crossflow and downflow styles. All AFCO radiators offer a furnace brazed sealed core without the use of epoxy and are all tested before shipping. Order the fitment specific to your vehicle application. Bolt-in direct-fit radiator features include: * Aluminum construction * 100 percent TIG-welded * Pressure-tested * Pre-drilled mounting holes * Filler neck and drain petcock * Two rows of 1 in. tubes for the maximum cooling available for your vehicle
( 13 )
$1,046.99
On Sale
Griffin Performance Fit radiators are dropping into vehicles all over the country. Why, you may ask? Constructed from an unrivaled layout of coolant tubing, these versatile radiators are truly dominating the cooling industry--not to mention, they're budget-friendly. Choose the style, location, and size needed for your application, then order one for your musclecar or off-road rig today! * Griffin Performance Fit radiators may require modifications for installation. * See Griffin Exact Fit radiators for installation with no modifications.
( 358 )
$1,289.00
$1,160.10
Be Cool aluminum radiator power cooling modules are designed to properly cool your vehicle. Kits include: * Aluminum dual 1 in. core performance radiator with oval fluted tubes * Aluminum fan mounting brackets or straps with hardware (where applicable) * Diamond-cut, vented coolant recovery tank (where applicable) * Fan wiring harness(es) with 40 amp relay(s) * Be Cool billet radiator cap (when noted) * One 16 in., dual 11 in., or two 13 in. high-torque Euro black electric puller fan(s) (in selected kits) * Natural or polished aluminum finish * Bolt-in installation * Fan upgrades sold separately
Not Yet Reviewed
$1,299.99
Be Cool dual electric fan wiring kits are designed to wire a dual fan to your vehicle. They include a 50 amp waterproof-style relay, a fusible link, a wiring harness, wire connectors, and a detailed instruction sheet. If you need to control the fan manually, the required switch is sold separately.
( 9 )
$1,399.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
