Availability
Showing In Stock Items. Show All 116 Items.
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 23 )
$21.99
—
$33.99
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 68 )
$9.99
—
$30.99
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 239 )
$239.96
—
$322.46
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$59.99
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 38 )
$319.00
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 99 )
$14.99
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 22 )
$79.99
Summit Bucks
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$19.99
—
$20.99
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 104 )
$15.99
—
$22.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$52.99
ACDelco GM Genuine Parts fuel pressure sensors send readings to the powertrain control module, which uses the data to adjust fuel delivery parameters. These true GM OE sensors are factory-recommended replacements, manufactured to provide the performance, durability, and service life you expect from General Motors. Monitor your fuel system accurately with the model designed for your application.
( 3 )
$22.99
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 56 )
$289.75
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$51.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$46.99
—
$172.99
Bosch Manifold Absolute Pressure (MAP) sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance. Each model features an extremely sturdy design with special coatings for resistance of harmful chemicals inside the intake manifold. Bosch continually improves their MAP sensor designs with the latest chip technology, and they're engineered to meet or exceed your vehicle's original equipment specifications (performance, drivability, economy, and emissions). Dozens of styles are available for specific vehicle and engine applications. Don't let your engine's performance suffer—replace your faulty MAP sensor with the reliability of Bosch.
Not Yet Reviewed
$18.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$58.99
Hypertech REACT Performance throttle enhancers put complete throttle response control at your fingertips. With throttle curves designed to provide a more exciting ride, these innovative optimizers deliver fully customizable power with a simple knob that lets you switch between multiple modes and throttle intensity on-the-fly. Installation is easy—completely plug-and-play with automatic setup sequence, and a magnetic A/C vent mount. Also, Hypertech REACT throttle enhancers will not void your factory warranty. Order the model recommended for your specific vehicle. Features of Performance throttle enhancers: * Modes: Track, Sport, Street, Economy, Stock * Pressing the knob clicks between each drive mode curve * Rotating the knob up increases throttle intensity, rotating down decreases throttle intensity * On-the-fly adjustments * LED setting indicators * Multi-level safety protection—incorporates multiple checks of the accelerator pedal signals coming and going from the microprocessor inside * Custom tuning software * Internet updateable
( 2 )
$263.91
The coolant temperature sensor, also known as the coolant temperature switch, is an engine management system sensor used to monitor the engine coolant's temperature. Because temperature play a vital role in engine performance, a problem with your coolant sensor could quickly translate into engine issues. Holstein Parts coolant temperature sensors contain only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. And they offer superior coverage for domestic and import applications.
Not Yet Reviewed
$6.99
—
$20.99
ACDelco GM Genuine Parts camshaft position sensors are a GM recommended replacement ideal for many vehicles on the road today. They monitor the rotational position of the camshaft(s). These sensors provide a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. GM Genuine Parts camshaft position sensors have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 11 )
$14.99
—
$29.99
Keeping your engine cool is a big deal. Standard coolant temperature sensors offer fit and function to meet or exceed OE specifications for the peak operating performance of your vehicle's engine. Many functions of your vehicle depend on its coolant temperature sensor, so Standard sensors are 100 percent factory-tested to ensure trouble-free performance and extended service life. Do you have a check engine light? Replace corroded coolant temperature sensors with new ones from Standard Motor Products.
( 9 )
$8.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$35.99
—
$79.99
Standard Motor blind spot detection sensors are direct-fit OE replacements to ensure proper fit and function. They monitor the sides of your vehicle to notify the driver of unseen obstacles—helping you to avoid accidents, minor rear-end collisions, and inaccurate parking, as well as making safer lane changes on the highway. These blind spot detectors have a plug-and-play design for easy installation. Order the model recommended for your vehicle application.
( 1 )
$254.99
—
$307.99
Chevrolet Performance individual bolts are offered to replace your missing or damaged automotive bolts. They can be used in multiple applications and are available in a variety of sizes, materials, and finishes. Keep some bolts from Chevrolet Performance on hand.
( 2 )
$6.99
Why tempt fate? Replace faulty measuring devices ASAP with ACDelco ABS wheel speed sensors—to restore proper braking function and performance. Hundreds of models are available for fitment on vehicles from the 1980s and up. These recommended replacements ensure the same durability, quality performance, and service life you expect from General Motors parts.
( 8 )
$35.99
—
$36.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
