Availability
Showing In Stock Items. Show All 35 Items.
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 390 )
$228.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 371 )
$42.99
—
$306.99
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 120 )
$138.99
—
$152.99
If you're running headers with close tolerances or have an engine bay with little room, Summit Racing™ ceramic ignition wire sets are the cure for burnt and melting boots. Their ceramic coating acts as a heat mirror, reflecting infrared energy and heat away from the plug boot—and it's engineered to resist flaking and peeling. The 8mm spiral core silicone wires deliver maximum energy to the spark plugs with built-in RFI suppression for your street-driven vehicle. These affordably priced wire sets are true performance upgrade replacements for OE types. They're available (assembled or non-assembled) with different terminal and boot ends for fitment on a range of vehicle applications.
( 90 )
$127.99
—
$134.99
Summit Racing offers replacement thermostats for thousands of vehicles. They're offered in a variety of styles, materials, flow rates, temperature ratings, and more. A reliable thermostat is essential to your cooling system and overall performance—kicking in precisely when your engine needs it. Order the model best suited for your application.
( 361 )
$30.99
—
$49.99
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1018 )
$49.99
—
$57.99
Summit Racing™ timing cover gasket kits provide a tight seal to keep contaminants out of the gear shaft area. They're offered for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs. Choose the kit which corresponds to your year/make and engine application.
( 30 )
$40.99
Summit Racing™ offers OE replacement alternators for a wide range of vehicles from 1995 and up. They're designed to fit in the factory location and install easily without any modifications. The alternators are manufactured from high-quality materials that meet or exceed the factory specifications. Available for passenger cars, trucks, SUVs, and vans, these stock-style alternators will eliminate your battery charging problems for good. Order the model recommended for your application.
( 32 )
$186.99
—
$199.99
Summit Racing™ LS valve cover gaskets are excellent options for your engine, especially if it's making high horsepower. Produced using premium materials, our gaskets ensure a leak-free seal for your LS build. Create a tight barrier to keep oil in and external elements out with Summit Racing™ LS valve cover gasket kits.
( 1 )
$17.99
Summit Racing™ Positraction differential carriers deliver aggressive, yet smooth, controllable traction. Our carriers feature nodular iron cases, forged steel internals, strong teeth—and they're fully rebuildable. We offer fitments for dozens of axle models. Whether replacing or upgrading, Summit Racing™ Positraction differential carriers will put power to the pavement, providing the confidence and performance you need.
( 49 )
$641.99
Summit Racing™ OEM LS valve covers make a great choice to service and maintain your vehicle's LS engine. They are made from premium materials to OEM specifications for proper fit and performance, as well as good looks under the hood. Choose the replacement valve covers for your application.
( 7 )
$57.99
—
$76.99
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 603 )
$261.99
Summit Racing™ offers exhaust manifold gaskets in a wide range of sizes and port-style configurations. They feature a quality steel core laminate construction. These replacement seals can repair an exhaust manifold leak—or prevent it from happening in the first place. Order the pair recommended for your engine application.
( 23 )
$16.99
Summit Racing™ offers header bolts for a variety of engine applications, from 1955 and up. These stainless steel fasteners have small 3/8 in. hex heads for use with a box end wrench and a 9/16 in. head flange that eliminates the need for washers. For rebuild, restoration, or swap, replacement bolts from Summit Racing™ will properly secure your header.
( 14 )
$12.99
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 197 )
$68.99
Summit Racing™ drive-by-wire throttle bodies are a perfect upgrade for any late model LS/LSX engine. They're precision-machined from 6061 billet aluminum and come in multiple finishes. The unique blade design allows these throttle bodies to bolt right up to any factory or aftermarket LS/LSX intake manifold—and they utilize the original late model GM 6-pin connector. Their larger bore size allows for increased airflow, which results in fast, smooth acceleration across all RPM ranges. The proprietary electronics and stepper motor allow these throttle bodies to be used on both naturally aspirated and forced induction engines. Tuning is required for installation.
( 7 )
$601.99
—
$621.99
Summit Racing offers exhaust flanges in a variety of 2- and 3-bolt pattern sizes and shapes. The 3/8 in. thick flanges are available in steel or stainless steel—and are designed to ensure an accurate, leak-proof seal for your exhaust components. Order the model that fits your pipe diameter and other fitment specs.
( 94 )
$28.99
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$59.99
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 41 )
$7.99
Whether you're looking to add amperage to your electrical system, or style to your engine compartment, we've got a Summit Racing™ alternator to help you accomplish your mission. Depend on Summit Racing™ to get the power you need and the space you crave.
( 919 )
$301.99
On Sale
Keep your plug wires properly protected from extreme underhood heat with Summit Racing™ spark plug boot heat shields. Our plug wire boot shields are inexpensive, extra protection from damaging heat-generating sources. Protect your plug wire boots and increase their lifetime. They offer an easy, snap-on installation.
( 6 )
$34.99
$31.99
—
$33.99
Summit Racing™ Pro LS ignition coil covers are a great way to dress up your LS engine. These aluminum coil cover sets have a durable powdercoat finish with an etched Summit Racing™ logo to stylishly hide LS engine coil packs. The covers fit GM LS engines utilizing existing coil bracket mounting points and have an oil fill hole to accommodate the oil fill tube. These covers will not clear factory high-mount alternators, like those found on Corvettes, unless a cutout is fabricated or aftermarket alternator and brackets are used.
( 3 )
$330.99
Don't ignore the signs! A clunking and clanging noise, intense vibrations at accelerated speeds ... it could be an indication of a failing U-joint. If that's the diagnosis, here is the solution--replace it with one of our Summit Racing Equipment® U-joints. These drivetrain components are engineered from quality materials to meet or exceed OE standards, and are available in applications with forged and case-hardened alloy steel crosses for lasting service life. The bearing cups are case-hardened for strength and durability, and superior seals help keep contaminants out and allow for proper lubrication. Plus, a grease fitting in the cross body allows for easy maintenance. Select your part application and install it to avoid complete U-joint failure--problem solved!
( 32 )
$16.99
Summit Racing™ idle air control valve and throttle position sensor bolt kits are application-specific for use in mounting the TPS and IAC to the throttle body on LS-style engines. These replacement kits consist of two each: M4-12mm and M4-8mm bolts, and four washers to facilitate installation. They fit 1997-2014 GM LS Series engines.
( 7 )
$2.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
