CHEVROLET SILVERADO 3500

Tilton ST-246 Twin Disc Clutch Kits

Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque

4.11 out of 5 stars ( 9 )

$1,576.75

Pacific Performance Engineering CNC-Ported LLY/LBZ/LMM Cast Iron Cylinder Heads

PPE's CNC-ported LLY/LBZ/LMM cast iron cylinder heads are the ultimate upgrade to your Duramax engine to eliminate any head gasket or cracking concerns. Cast from high-quality alloyed gray iron, the PPE cylinder heads offer elevated fatigue strength, heat, and creep resistance, which prolongs the cylinder head's lifespan significantly. The cylinder heads also share the same heat expansion rate as the stock cast-iron cylinder block—no more blown head gaskets! PPE's CNC-porting process improves airflow, enhancing power, fuel efficiency, and throttle response while reducing engine stress and turbo lag. By smoothing the ports and maintaining wall thickness, these heads provide increased horsepower and torque without sacrificing reliability. Tailored to each specific head, the CNC machining compensates for casting variations, ensuring consistent and optimized airflow dynamics. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, cast iron cylinder heads from Pacific Performance Engineering are undoubtedly the best choice. Product features: * Specially alloyed gray cast iron liquid-cooled cylinder head * 5-Axis CNC-ported intake and exhaust ports for smooth, unrestricted airflow * Increased thermal efficiency compared to aluminum heads * Reduced noise and vibration, better ride * Eliminates head gasket scrubbing issue (blown head gasket) * Higher fatigue strength and heat resistance * Premium 21-4N, Stellite-reinforced exhaust valves * Fully nitridated valves, better abrasion resistance * Ready to install—comes with all valvetrain components, rocker arm dowels, and freeze plugs * Requires the use of LBZ/LMM glow plugs on LLY engines (sold separately) Important Notes: The valve seats of the PPE heavy cast iron cylinder heads are installed with an interference that maximizes the durability and lifespan of the cylinder heads. Such interference might not be optimal for extreme-performance applications where a significant amount of heat is created. For those applications, PPE suggests that the exhaust valve seats be replaced with higher interference (+0.006 in. to +0.008 in.) oversized exhaust valve seats (Nominal size 34mm).

Not Yet Reviewed

$1,709.99

Fleece Performance Cheetah LB7 Turbochargers

Inspired by the fastest land animal, Fleece Performance Cheetah LB7 turbochargers can power your rig all the way up to 625 RWHP. These turbos will outrun the competition with custom 63mm compressor wheels, high-flow Inconel turbine wheels, and a 100 percent drop-in installation! Your diesel will feed on maximum airflow, more power, lower EGTs, and increased efficiency. If you're on the prowl for performance, let a Cheetah turbocharger from Fleece set the pace for your LB7 engine.

Not Yet Reviewed

$1,999.00

Hays Twister Full Race Torque Converters

Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.

5.0 out of 5 stars ( 1 )

$1,599.95

—

$1,999.95

BD Diesel Remanufactured Turbo Head Units

BD Diesel remanufactured turbo head units use the latest in aerodynamic technology and materials that feature lightweight, extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. They feature a new look with natural finished cast aluminum that meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured turbo head units won't let you down.

Not Yet Reviewed

$1,539.95

Yukon Gear & Axle Dura Grip Positraction Carriers

Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.

4.38 out of 5 stars ( 141 )

$1,719.99

USA Standard Gear Ring and Pinion Gear and Differential Combos

USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.

5.0 out of 5 stars ( 4 )

$1,814.99

—

$1,928.99

Aeromotive Phantom Direct-Fit Fuel Pumps

Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.

5.0 out of 5 stars ( 2 )

$1,813.01

Mile Marker Hydraulic Winches

If the thought of an electric winch leaves you cold, and you want the advantages of the hydraulic type, Mile Marker's hydraulic winches are right up your alley. They deliver the pulling power you need, when you need it--up to a rated 12,000 lbs. They offer free-spooling and mechanical load locking, and incorporate stainless steel tie bars and fasteners. In addition, they can be mounted in multiple positions, and they're so corrosion-resistant and tightly sealed against the elements that they can even be used underwater. Note: An adapter kit, sold separately, is required in order to work from an OE power steering pump.

5.0 out of 5 stars ( 2 )

$1,649.00

—

$1,849.00

Be Cool Show & Go Modules

It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays

4.75 out of 5 stars ( 8 )

$1,699.99

Summit Bucks

DeatschWerks Fuel Injectors

DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.

4.69 out of 5 stars ( 71 )

$1,669.00

—

$1,689.00

Mishimoto Intercoolers

Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!

5.0 out of 5 stars ( 2 )

$1,595.95

Titan Travel Trekker Auxiliary Fuel Systems

Now a new, better concept in auxiliary fuel systems: The TITAN Travel Trekker™ is made of military grade, cross-linked polymer--- tougher than steel and longer lasting than aluminum. Its durability is legendary. These tanks are routinely tested using state-of-the-art computer simulations as well as physical drop tests. Tanks filled completely and then dropped 30 feet onto a steel plate--- never losing a drop of liquid. They are so tough and well-proven that they are backed with a lifetime warranty. There are no welds to fail and if you ever accidentally run your gooseneck hitch into your Travel Trekker™ you will most likely find it springs right back into shape. Also, soap, water and perhaps a little furniture spray polish is all you need to keep your tank looking new. The Travel Trekker™ is baffled to minimize fuel sloshing and compact enough that it can be installed in full-sized pickup beds without interfering with most in-bed hitches and tonneau covers. With one touch, the remarkable TITAN Electronic Controller™ transfers fuel from the Travel Trekker™ to the vehicle's primary fuel tank until it is automatically stopped by the controller or the button is touched again. The controller monitors and reports the fuel level in the auxiliary system at all times. Controller installation is simple and never requires cutting into the vehicle's wiring harness which could affect the manufacturer's warranty. Fuel is pumped from the top of the tank which is safer and more environmentally responsible than gravity flow systems. The system comes complete with all necessary installation components and detailed instructions. Features Include: * Baffled to reduce sloshing * Electronic Controller transfers fuel * Fits under most tonneau covers * Lifetime Warranty * Does not interfere with in-bed hitches * Meets DOT FMCSA Title 49 Requirements * Pumps from top of tank

5.0 out of 5 stars ( 2 )

$1,519.05

Zone Offroad Fox 2.0 Adventure Suspension Lift Kits

Zone Offroad Fox 2.0 Adventure lift kits are custom-designed for vehicle-specific compatibility, working within the parameters of the factory suspension and steering geometry to maximize potential while allowing optimal clearance for larger tires and rugged trails. Each kit contains the necessary components for the specific application, along with Fox 2.0 Adventure Series shocks. With lift options ranging from 0 to 10 in., you can build the setup that fits your ride and ensure a smoother ride on- or off-road. Select a Zone lift kit designed for your vehicle. Fox 2.0 Adventure Series shocks feature: * 2 in. diameter steel body * Internal floating piston (IFP) monotube design * Large 5/8 in. hard chrome plated heat-treated alloy steel shaft * Race-developed high-flow piston design * Application-specific valving to maximize performance * Long-lasting clear anodized finish * Superior off-road performance * Premium ride comfort

Not Yet Reviewed

$1,622.60

Titan XXL Mid-Ship Fuel Tank Systems

Transform your driving experience with one of these Titan XXL Mid-Ship fuel tank systems. With this innovative upgrade, you're not just investing in a larger fuel tank - you're investing in unparalleled freedom and convenience on the road. Picture this: no more frequent stops at the gas station, no more worries about running out of fuel on long journeys, and no more compromises on where you can go or what you can do. With the Titan XXL Mid-Ship Fuel Tank Systems, you have the power to stay on the road longer, tackle more ambitious projects, and explore farther than ever before. Whether you're towing heavy loads, embarking on cross-country adventures, or simply navigating daily commutes, the extra capacity provided by the Titan XXL Mid-Ship Fuel Tank Systems gives you the confidence and peace of mind to go the distance, no matter where the road takes you. Crafted from our renowned military-grade, cross-linked polymer material, this tank sets the standard for durability and reliability. With a thickness of at least 1/4 in., they are built to outlast all competitors, standing strong against the toughest conditions. Backed by a lifetime warranty, you can trust in its quality and performance for the long haul. The systems come complete with a black-coated, galvanized steel mounting strap and front support system.

4.06 out of 5 stars ( 16 )

$1,519.05

Tuff Country EZ-Ride Suspension Lift Kits

Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts

4.1 out of 5 stars ( 72 )

$1,517.99

—

$1,929.96

McLeod RXT 1200 Clutch Kits

Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.

5.0 out of 5 stars ( 12 )

$1,695.00

—

$1,895.00

ATS Diesel Performance Five Star Torque Converters

ATS Diesel Performance Five Star torque converters bring top-of-the-line technology and performance to your rig. Their efficient design features innovative fluid-assist technology and a unique 5-disc setup that provides 100 percent mechanical bond during lock-up to ensure no plate slippage. Optimal stall speed and maximum torque multiplication create better performance, higher fuel economy, and unsurpassed reliability. Order the model recommended for your transmission application. Product features: * Hardened pump drive hub * Furnace-braised impeller veins * Proprietary mixed-flow stator * Internally balanced turbine * Billet pistons * Patented Viskus clutch drive with square tab lugs * Patented 2-piece construction * Exclusive 12-bolt cover design * Patented square lug design * Billet cover

Not Yet Reviewed

$1,509.99

Icon Vehicle Dynamics 2.5 VS PB CDCV Shocks

Looking for a more user defined tune? Consider Icon Vehicle Dynamics 2.5 VS PB CDCV (Compression Damping Control Valve) shocks. The CDCV is an externally adjustable valve that restricts oil flow into the reservoir, creating 10 levels of compression damping force ranges. Available for front and rear, they are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. Configured specifically for each application in both length and damping tune, these VS (vehicle specific) PB (piggyback) CDCV shocks are 100 percent rebuildable and revalvable. Choose the Icon 2.5 VS PB CDCV shocks designed for your vehicle. Features and benefits: * Piggyback design improves heat dissipation to reduce shock fade during prolonged use * Premium grade 5W shock oil for consistent suspension damping along a wide temperature range * Nitrogen charged monotube design with remote reservoir * One-piece digressive piston design with vehicle-specific valving * 7/8 in. diameter induction hardened, chrome plated shock shaft * PTFE-lined spherical bearings and application-specific mounting hardware * CNC-machined 6061 aircraft-grade aluminum components

Not Yet Reviewed

$1,525.95

Nitrous Outlet EFI Dual Stage Single Nozzle Systems

Upgrade your current single stage system. Nitrous Outlet EFI dual-stage single nozzle systems are the simple way to add another stage of nitrous via their 1/8 NPT wet nozzle, break up a large shot, and keep the tires hooked up and going down the track nice and straight. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and nozzles. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. These complete race-proven Nitrous Outlet systems will convert your system to a true dual stage capable system.

Not Yet Reviewed

$1,603.99

—

$1,791.99

All American Billet Serpentine Kits

All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.

4.0 out of 5 stars ( 16 )

$1,885.50

—

$1,975.50

Dee Zee Combo Transfer Tanks

Dee Zee combo transfer tanks offer room for liquid, room for gear—and plenty of extra room in your truck bed! These units combine a handy utility chest, together with a liquid transfer tank, so they take up less of your much-needed truck bed space. The tanks feature a radius curve design that eliminates key weld pressure points; they include a cap, a coupler for venting, and three stability baffles to prevent sloshing and dangerous weight transfer. Dee Zee utility chests have lockable stainless steel paddle handles. Combos are available in Brite-Tread aluminum, with or without an UltraBlack powdercoat finish; or in heavy-duty steel with a textured white or black powdercoat finish designed for corrosion protection. Choose the size and tank capacity tailored for your make/model—then conserve space while transporting everything you need with Dee Zee combo transfer tanks.

Not Yet Reviewed

$1,778.99

—

$1,936.99

Nitrous Express 4-Bolt Plate Nitrous Systems for GM LS Engine

Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation

4.0 out of 5 stars ( 3 )

$1,685.24

Nitrous Express 3-Bolt Plate Nitrous Systems for GM LS Engine

Nitrous Express 3-bolt plate systems for GM LS-style engines feature a billet nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive on all LS car and truck intakes with a 3-bolt throttle body. Power levels can be adjusted between 50, 100, 150, 200, 250, 300 and 350 horsepower. Order the system preferred for your setup. Systems include: * Billet nitrous plate * Choice of 5 lb., 10 lb., 12 lb., or 15 lb. aluminum bottle * Stainless steel bottle brackets * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation

3.83 out of 5 stars ( 6 )

$1,685.24

CHEVROLET SILVERADO 3500 Parts and Accessories