Availability
Showing In Stock Items. Show All 101 Items.
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$17.99
—
$24.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 506 )
$17.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$16.99
—
$23.99
WIX has the lowdown on dirt, and their Racing oil filters are ready to trap more dirt--45 percent more! Your engine needs lots of clean oil to get you across the finish line first, and WIX has spent years of researching the effects of racing on filters, and decades of manufacturing the best, to gain true distinction in all types of racing. These oil filters feature special glass-enhanced media to catch dirt particles without restricting oil flow to your hungry powerhouse. Plus, a strong steel perforated spiral center tube keeps the flow moving and has the highest collapse strength in the industry. WIX Racing oil filters have a heavy-duty can and cover to handle the stress of racing, and some filters include anti-drainback and filter bypass valves. If you're a serious racer, these track-proven filters are your ultimate choice. Guard your engine from power-robbing dirt with WIX Racing oil filters. These filters are designed for racing use only--not for street use.
( 112 )
$10.99
—
$12.99
Melling Automotive Products manufactures a complete line of heavy-duty oil pump intermediate driveshafts. These shafts are made of stress- and fatigue-proof steel for maximum strength and durability. They're available for thousands of vehicle and engine family applications.
( 176 )
$10.99
—
$25.99
Melling oil pump screen assemblies are designed for use with your Melling oil pump. These replacement pickups have a built-in filter screen and are engineered to fit the stock pan and specs—and, in some cases, Street/Strip and Circle Track applications. Various installation methods are available, including bolt-in, press fit, and screw-in. Melling offers nearly 200 models; select the assembly tailored for fitment with your specific vehicle or engine.
( 368 )
$10.99
—
$17.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$18.99
—
$21.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 38 )
$11.99
—
$17.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$11.99
—
$21.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 115 )
$20.99
—
$23.99
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 6 )
$10.99
—
$19.99
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 23 )
$21.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 79 )
$16.99
—
$19.99
Melling spin-on oil filter adapters convert the oil filter landing on the engine block to an oil passage. They are made for use with a remote cooler and/or a remote filter.
( 21 )
$19.99
Take up the slack with Dayco No Slack Idler pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime-lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Idler pulleys.
( 80 )
$19.99
Available for a wide selection of popular engines, Proform chrome engine oil dipsticks kits consist of both the stick and the tube. These kits have classic hook handles.
( 92 )
$10.99
—
$21.95
WIX oil filters play a vital role in in your vehicle's lubrication system, protecting your engine from premature wear. As gearheads know, every moving part in the engine requires clean oil! WIX oil filters trap more dirt than the leading national brand, and they keep filtering long after the competition has completely quit. WIX patented the first spin-on oil filter in 1954 and has been at the forefront of filter technology ever since. Canister-style oil filters feature strong, full-metal base plates to prevent leaks at the double seam under severe driving conditions. They also offer glass-enhanced media that improve each filter's ability to catch and hold engine-damaging dirt. Choose the WIX oil filter to fit your make and model—for a cleaner-running engine over many extra miles.
( 375 )
$12.99
On Sale
Chrome plated for beauty and durability, these Y-wing bolts from Mr. Gasket make valve cover removal fast and easy. They are precision-engineered and feature extra-long threads.
( 23 )
$18.34
BluePrint Engines offers oil dipsticks and tubes for a wide range of vehicles—including many Chevrolet, Buick, GMC, Oldsmobile, and Pontiac models from the 1980s. These custom heavy-duty and heat-treated dipsticks are the perfect complement to your BluePrint engine, helping to ensure an accurate oil level.
( 3 )
$18.95
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 163 )
$10.99
—
$19.99
Summit Racing™ offers standard timing sets in a variety of styles, including link belt, roller and non-roller. Accurate timing and long life are among the many strong points of these timing chain and gear replacement assemblies. They're available for hundreds of model-specific and engine-specific applications. An iron cam gear and steel crank gear are included with each set.
( 62 )
$19.99
Earl's Performance PCV fittings for GM LS allow easy installation of a catch tank on the GM LS racing engines that have a PCV fitting on the OE valve cover. These breather adapter fittings have a 3/4 in. O.D. that fits into the OE grommet instead of the stock PCV fitting. Choose from fittings with -8 AN or -10 AN male flare. They're ideal for use in racing applications that require the use of a catch tank.
( 9 )
$16.81
These Chevrolet Performance camshaft locking plates are designed to keep your camshaft where it belongs. They feature steel construction and install easily without any special modifications. Available for different types of engines, Chevrolet Performance camshaft locking plates will keep your camshaft in place throughout the entire engine operating range.
( 12 )
$20.99
Clearance
It's never a good idea to cut corners when you're installing new valves. Melling is noted for its world-class engineering, superior grade alloy materials, and advanced manufacturing processes. Melling intake and exhaust valves meet the exacting specifications required for efficient, durable, and powerful performance. They feature high-fatigue strength, excellent heat resistance, and offer years of dependable service. Available in a wide variety of designs and materials for most OEM and performance vehicle applications, each valve is built and validated to meet or exceed OE specifications. Melling valves—unsurpassed quality you can trust.
( 44 )
$13.99
—
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
