Availability
These Proform Super-Street roller rocker arms will help rid your engine of internal friction. They feature a race-proven, cage bearing fulcrum and roller tip. The Super-Street rocker arms not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. Proform rockers are precision-machined to ensure consistency and ratio accuracy, and they have a great looking anodized finish.
( 125 )
$189.99
—
$289.99
These Proform high-flow mechanical aluminum water pumps feature a stamped steel impeller spinning on heavy-duty ball bearings. The result is up to 40 percent more coolant flow, giving you real performance value for your dollar. They are available in a natural or polished finish.
( 147 )
$96.99
—
$148.99
Give your engine an aggressive, custom look with a pair of GM licensed slant edge valve covers by Proform. The diagonal cut of the top section ensures no mess, and the bottom lip will give a tight seal. Each of these valve covers is designed to clear roller rockers and stud girdles. They're available in a variety of styles and finishes for applications from the 1950s and up.
( 215 )
$254.95
—
$459.95
Proform high-torque starters are 100 percent new, not rebuilt. They feature an offset design that results in more clearance between the oil pan and the starter. The powerful units are offered in a variety of styles, finishes, and other options for both manual and automatic transmission applications. These replacements are available for countless vehicles from the 1950s and up.
( 113 )
$133.99
—
$212.99
Are you building a high-compression, high-horsepower engine? Then you're going to need one of these Proform high-compression racing starters. They're 100 percent new, not rebuilt, and are built from scratch with all-new components. Their torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression ratio. The Proform high-compression racing starters feature an offset design that results in more clearance between the oil pan and the starter. They're available in models for thousands of applications, from 1955 and up.
( 54 )
$143.99
—
$148.99
Proform stamped steel valve covers are 20 percent thicker than typical aftermarket valve covers. This greatly reduces the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. These heavy-gauge steel covers are officially licensed GM products and bear the Chevrolet logo and Bowtie Emblem, unless otherwise specified. They're available in both tall and short heights, with either a chrome or black crinkle finish. Oil-restricting baffles are offered in many valve covers, for those who want to maintain the PCV hookup; and all covers are supplied with grommets for use with an air breather and PCV valve.
( 312 )
$85.95
—
$214.95
Get rid of those boring, old valve covers and put on a set of GM-licensed diecast aluminum Chevrolet valve covers from Proform. These premium covers feature stout diecast aluminum construction with thick gasket rails to resist unwanted oil leaks. They are equipped with GM-designed baffles, so you can be sure they'll work well. The covers have recessed Bowtie and Chevrolet logos that are inlaid with classic Chevrolet red. They're available in your choice of chrome plated, black crinkle, or polished finishes.
( 180 )
$211.95
—
$349.95
If you have been looking for great looks in an easy-to-install package, look no further than Proform GM licensed Chevy engine dress up kits. The valve covers are constructed of heavy-gauge steel to reduce leakage around the flanges and have the Bowtie Emblem embossed into them. They come in your choice of three finishes: triple chrome plated for a durable, long-lasting shine; black crinkle for little cleaning; or high-tech metallic gray.
( 112 )
$169.95
—
$339.95
These Proform pushrods can give you the foundation you need for a reliable valvetrain. They are manufactured from 4130 chromoly heat-treated tubing with .065 in. wall thickness. Proform pushrods can be used with guideplates; they feature a heat-treated insert on one end and a precision-formed tip to meet the friction-reducing specified radius on the other. Create a stable and durable valvetrain with these Proform pushrods.
( 7 )
$89.99
—
$94.99
The GM licensed distributors by Proform will give your engine the power and stability that is needed. Proform manufactures these distributors from quality to materials to ensure performance and durability. Other features includes the following: * High performance control module * Melonized steel gear * Sintered steel weights for lighter weight and durability * Adjustable vacuum advance * Bronze sintered bushings * Capacitor that prevents radio static * High-dielectric cap with brass terminals * Premium rotor (except where otherwise specified)
( 25 )
$195.95
Proform electric water pumps eliminate unnecessary weight, as well as the impeller-induced drag experienced with mechanical pumps at high rpm. Proform pumps crank out up to 35+ gpm and deliver the cooling that can mean the difference between a win and second place! Made of durable, lightweight diecast aluminum, they're epoxy coated for corrosion resistance, and can be used for competition or street applications. The replacement pumps are available in several size and color options for vehicles from the 1950s and up.
( 103 )
$179.99
—
$317.99
Proform alternators are available for countless vehicles, from the 1950s thru the 1990s. These replacements come assembled and ready to bolt on. They're available in a variety of styles, finishes, amperage outputs, and other options. Select the model recommended for your application.
( 285 )
$122.99
—
$189.95
Proform GM licensed Collector's Series slant-edge valve covers top your small block with aggressive looks and innovative design. These premium die-cast valve covers have more internal clearance than most, and the raised Bowtie Emblem with Chevrolet lettering adds standout looks. These baffled covers include grommets and are available in a choice of powdercoated colors. Crown your engine with show-quality Proform GM licensed Collector's Series slant-edge valve covers--your small block never looked so good!
( 11 )
$270.99
—
$317.95
Proform's Race HEI distributors are the real deal. They're designed to meet the high-performance demands of racing and keep on ticking. The distributors are built with 100 percent new parts, including the housing for guaranteed durability. They come in your choice of polished or unpolished aluminum housings, and four different cap colors. This distributors produce a 50,000 V spark through 7,500 rpm, for an enormous increase over OE HEIs. Also included are a 50 V coil, true spark alignment for instantaneous response, a high-performance curve, a premium cap with brass terminals, and a low-saturation ignition module.
( 82 )
$99.99
—
$124.99
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 164 )
$240.99
Proform high-performance gear drive sets offer high-precision timing, eliminating chain stretch. They are machined for noise, easy to install, and fit under stock timing covers.
( 38 )
$100.99
—
$129.99
Offering polished performance, Proform slant edge diecast aluminum valve covers aren't just another pretty face. They're made from an innovative mold design that delivers generous internal clearance. These tall covers feature a removable baffle and include grommets. Plus, the price is pretty sweet, too! Top your cylinder heads with the performance and value of Proform slant edge diecast aluminum valve covers.
( 38 )
$275.95
Proform Chevy Bowtie timing chain covers are the add style and protection to your engine bay. They're made of heavy steel for durability and to ensure excellent gasket sealing. The officially licensed GM covers include the Chevrolet name and a Bowtie emblem to give your part an authentic factory look. They're engineered to meet General Motors standards for reliable installation and include a GM production oil seal already installed. Available for both Chevy small and big block engines from the 1950s through the '90s, these Bowtie timing chain covers are designed as replacements for engines with a bolt-on timing pointer.
( 69 )
$37.95
—
$42.95
Proform stamped roller tip rocker arms the affordable way to reduce internal valvetrain friction and valve stem wear. They feature an extra-long slot that eliminates rocker-to-stud interference when using high-lift cams, and are available at a fraction of the cost of similar rockers.
( 9 )
$102.99
—
$104.99
These Proform high performance pushrods are made from premium high-grade steel. The tips are welded on, not pressed on. These pushrods are heat-treated for use with guideplates.
( 7 )
$54.99
Why mess with cleaning your old balancer when you can have one of these brand new OEM replacement balancers from Proform? These balancers are affordable, and many applications are available to suit your needs.
( 20 )
$89.99
—
$107.99
Get rid of that boring timing tab and replace it with one of these classic-looking Proform timing tabs. They're sturdily manufactured from quality materials and feature easy-to-read marks for accurate timing. In addition, with their long-lasting good looks, they'll make great additions to any engine.
( 31 )
$5.99
—
$8.95
Available for a wide selection of popular engines, Proform chrome engine oil dipsticks kits consist of both the stick and the tube. These kits have classic hook handles.
( 92 )
$10.99
—
$21.95
These Proform stamped steel rocker arms are designed for use when a roller tip is not required. Featuring proven OEM quality, their extra-long slot eliminates rocker-to-stud interference when using high-lift cams.
( 7 )
$91.99
—
$128.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
