Availability
Showing In Stock Items. Show All 51 Items.
On Sale
Painless Performance 27-Circuit Classic-Plus Chevy chassis harnesses are designed to fit the 1955, 1956, and 1957 "Tri-Five" models (150, 210, Nomad, and Bel Air)—and they include additional circuits for power options and accessories. The harnesses feature a factory location Painless mounting plate for the fuse block, front and rear lighting sockets, factory and aftermarket instrument cluster harnesses, and dash and turn signal connectors. They utilize GM color-coded high-grade TXL wire with the circuit identification printed on it for easy installation.
( 10 )
$605.99
$545.39
On Sale
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
$664.76
On Sale
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 84 )
$825.00
$742.50
On Sale
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$840.00
$756.00
On Sale
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$699.95
—
$799.95
$628.95
—
$718.95
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$849.95
$695.95
—
$763.95
On Sale
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$615.00
—
$685.00
$553.50
—
$616.50
On Sale
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 190 )
$652.54
—
$653.54
$602.54
—
$603.54
On Sale
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$540.97
$521.33
On Sale
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 137 )
$582.00
$523.80
On Sale
FiTech has partnered with TANKS Inc. to make your EFI upgrade even easier with a comprehensive line of new FiTech Go EFI fuel tank kits. Fuel injection demands higher pressure from an electric fuel pump, and the best place to mount a pump is in the gas tank. FiTech's in-tank module is supplied with a 340 lph fuel pump to support up to 800 hp. The fuel pumps bolt directly into the tank's recessed mount, providing a modern EFI solution for hot rods, classic trucks and muscle cars. FiTech Go EFI fuel tank kits also include the following: * Direct-fit tanks feature internal baffles for constant fuel delivery * In-tank pump module secures the supplied 340 lph pump in the tank * -6 AN inlet/outlet that provides leak-free fuel line connections * Recessed sending unit and pump mount that provides added clearance
( 23 )
$638.00
—
$681.00
$574.20
—
$612.90
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$564.95
$507.95
On Sale
Aldan American Road Comp coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.
( 42 )
$669.95
—
$679.95
$602.96
—
$611.96
On Sale
MSD recognized the need for a true marine performance distributor and built these Pro-Billet marine distributors to answer this need. Marine environments place rigorous demands on every component of the ignition system, especially the distributor. The combination of water spray, salt exposure, full throttle acceleration, and harsh vibrations all take their toll. The housing is CNC-machined from billet 6061-T6 aluminum, creating a housing with no porosity or weak areas. Internally, a Tuftride coated steel shaft is guided by a sealed ball bearing and an extra-long sintered bushing for high-speed stability and endurance. Each distributor uses MSD's race-proven magnetic pickup to trigger the ignition control. The pickup receives its signal through a precision-manufactured reluctor that is attached to the shaft. The mechanical advance assembly receives a QPQ plating for long lasting resistance to corrosion in marine environments. Their mechanical advance assembly is easily adjustable, so you can dial-in an ignition curve to match your boat's application. Three additional sets of advance springs and stop bushings are included with detailed instructions, making adjustments easy to perform and understand. The distributor cap is bolted and sealed to the aluminum base, and has two flame arrestor holes with brass screens machined into the base of the distributor. This design works to prevent ignition of gas fumes that may build up in the engine compartment. A special weathertight connector is supplied to provide a positive lock and water-resistant connection. This heavy-duty connector will withstand high temperatures and water, and plugs directly into the MSD 6M-2 or 7M-2 ignitions. The distributors come complete with a high-quality, bolt-down alkyd cap and MSD's racing rotor. These high-quality distributors have been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard. They require the use of a separate ignition box.
( 4 )
$632.95
$568.95
On Sale
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 36 )
$649.95
$583.95
On Sale
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
$541.44
—
$654.49
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$605.80
—
$769.75
$545.22
—
$692.78
On Sale
Whether you're a professional racer or an inspired amateur, stay ahead of the competition with Quick Fuel Q-Series 2-barrel Circle Track carburetors. They are comprised of a lightweight aluminum, no-nonsense main body--so they weigh less than other leading competition carburetors. The throttle bodies are CNC-machined to exacting tolerances and also provide exceptional strength. They have tough stainless steel throttle plates and sight glass windows for easy float adjustment, as well as other great features to give you improved throttle response for great track performance. When it comes to performance carburetors, Quick Fuel Q-Series carburetors should be at the top of your list!
( 1 )
$799.95
$718.95
On Sale
LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.
( 70 )
$739.99
—
$889.99
$665.99
—
$800.99
On Sale
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 251 )
$848.75
$763.88
On Sale
Yukon Gear & Axle ring and pinion sets are strong but quiet performers. Designed to handle some of the harshest conditions, these sets utilize the latest design and manufacturing technologies to afford you a smooth running gear that's durable and easy to set up. Yukon ring and pinions are available in hundreds of size, ratio, and axle model options. Whether you're on the street, off-road, or at the track, you'll experience unrivaled power and gear performance. Order the model recommended for your application.
( 172 )
$653.99
—
$659.99
$555.89
—
$560.99
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 945 )
$749.95
$673.95
On Sale
Griffin Performance Fit radiators are dropping into vehicles all over the country. Why, you may ask? Constructed from an unrivaled layout of coolant tubing, these versatile radiators are truly dominating the cooling industry--not to mention, they're budget-friendly. Choose the style, location, and size needed for your application, then order one for your musclecar or off-road rig today! * Griffin Performance Fit radiators may require modifications for installation. * See Griffin Exact Fit radiators for installation with no modifications.
( 358 )
$630.00
$567.00
On Sale
These CoolRide systems have the greatest application coverage and versatility of all of RideTech's systems. They will raise and lower the vehicle, improve the handling, and offer a terrific ride. On a front system, the shock is usually relocated to the outboard side of the lower control arm. A weld-on bracket mounts the top of the shock to the frame rail. On a rear system, the air spring and shock absorber will normally go in the stock locations. These CoolRide systems consist of an air spring, a shock absorber, and all of the necessary mounting bracketry and hardware.
( 2 )
$775.00
—
$875.00
$697.50
—
$787.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
