Availability
Showing In Stock Items. Show All 32 Items.
On Sale
Yukon Gear & Axle C-clips keep a secure hold on your axle. These little steel C-clips are mighty important, so they're precision-crafted to stay in the groove and prevent your shaft from sliding out. The replacement clips are available for fitment on more than a dozen axle models. Trust Yukon C-clips for differential maintenance.
( 48 )
$11.89
$10.11
On Sale
These Mr. Gasket thermostat housing and water outlet gaskets provide a great seal for your stock application. They are available to fit most applications and offer a quality seal you can count on.
( 50 )
$9.67
$8.70
On Sale
Mr. Gasket timing tabs are precision-manufactured and bolt on using your existing timing cover bolts. They're made from quality materials, with a pleasing finish that will complement any engine. They'll work with either factory or aftermarket timing covers, so you're covered either way.
( 49 )
$10.03
$9.03
On Sale
These bolts are made of a Grade 8 alloy and are heat-treated for extra strength. They feature a high hex head to prevent socket slippage and an extra-thick washer to allow for a more accurate, uniform torque.
( 8 )
$15.07
$9.80
On Sale
Yukon Gear & Axle Mighty axle seals use the latest designs and manufacturing technologies to produce a precision fit, tight seal, and long life. Maybe your old seals are starting to wear or maybe you're replacing axles—both are a good time for new seals. Whatever the reason, order the Mighty seals from Yukon Gear & Axle designed to fit your application.
( 36 )
$8.99
—
$11.99
$7.64
—
$10.19
On Sale
Since you're installing that new distributor, you'll need to hold it down with something. Why not use one of Mr. Gasket's hold-down distributor clamps? Made from heavy gauge steel, these clamps are the perfect way to dress up the engine compartment.
( 27 )
$11.44
$10.30
On Sale
Yukon Gear & Axle offers top-quality small parts, like these replacement crosspin bolts, to help you complete your differential repair, rebuild, restoration or upgrade. They're manufactured from hardened steel for maximum durability and engineered to fit specific axle model applications. For all your differential part needs and more, look no further than Yukon Gear & Axle.
( 11 )
$9.89
$8.41
On Sale
Worn pilot bearings cause rough shifting, which can wear out your transmission. When you change your clutch, count on McLeod for high-quality pilot bearings and bushings to properly align your clutch with the crankshaft.
( 41 )
$11.75
$10.58
On Sale
Yukon Gear & Axle offers pinion seals for a variety of specific axles, including Ford, GM, and Dana applications. These replacements are constructed from durable steel with inner rubber, ensuring a precision fit and tight seal. For differential components used on the track, the street, or the hills—drivers depend on the expertise of Team Yukon! Order the pinion seals designed to fit your application.
( 24 )
$9.99
—
$11.89
$8.49
—
$10.11
On Sale
These fuel pump block-off plates cover the opening left when you convert from a mechanical to an electric fuel pump. They're made from precision-cut steel that's highly polished and chrome plated. Gaskets are included.
( 28 )
$13.99
$9.09
On Sale
Even the smallest parts are important. Yukon Gear & Axle differential pinion nuts are quality steel fasteners that are ready to help you set the proper preload. They're offered in a variety of styles, sizes, and finishes to fit dozens of axle models.
( 20 )
$11.99
$10.19
On Sale
Yukon Gear & Axle ring gear bolts are available in a wide variety of diameter/pitch combinations and lengths to correctly fit your vehicle. These steel bolts offer strength and security with precision manufacturing. Get bolted in for the road ahead—or the lack thereof—with Yukon Gear & Axle hardware.
( 24 )
$7.99
—
$8.99
$6.79
—
$7.64
On Sale
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 76 )
$7.95
$7.16
On Sale
Silver Sport clutch fork boots prevent unwanted dirt, dust, and moisture from entering your bellhousing and away from your clutch. These bellhousing boots are made from durable rubber. Keep contamination out; seal the areas with Silver Sport boots.
( 3 )
$10.95
$9.86
On Sale
These curve kits allow your distributor to reach full advance more quickly (between 2,000 and 2,800 rpm), delivering maximum power and engine acceleration.
( 43 )
$16.40
$10.66
On Sale
JET Quadrajet fuel filters are direct-fit, high-flow replacements designed to be part of your performance engine upgrade. The paper element material screens contaminants as small as 25 microns—that's about half the standard diameter of a human hair! These fine sifters are available in either short or long lengths. Make sure your engine is running clean with JET Quadrajet fuel filters. Order the style recommended for your vehicle.
( 2 )
$6.71
$6.04
On Sale
These gleaming, chrome-plated, push-on breather/oil filler caps from Mr. Gasket fit over your oil filler tube. They have a side fitting for easy PCV hose hook up.
( 3 )
$12.93
$7.11
On Sale
Why reuse your old dowel pins when you have machine work done on your block? I can't think of a good reason, especially when these Mr. Gasket dowel pins are inexpensive and readily available. They are made from high quality steel, precision machined and case hardened for accurate cylinder head alignment.
( 4 )
$17.19
$9.45
On Sale
Major components, such as the ring and pinion, play a starring role in your gear train's operation. However, they couldn't do their jobs properly without a supporting cast, including these differential crush sleeves from Yukon Gear & Axle. The durable steel collars prevent your pinion bearing from being preloaded too tightly—and help prevent the pinion nut from loosening. When the time comes to service your differential, choose Yukon Gear & Axle crush sleeves, available in configurations for dozens of specific axle applications.
( 11 )
$4.99
—
$9.89
$4.24
—
$8.41
On Sale
Don't forget to change your seal when you change your timing chain or cam. These Mr. Gasket timing chain cover seals are designed to provide a reliable seal for your crankshaft.
( 7 )
$15.95
$8.77
On Sale
Standard Motor ignition coil brackets are direct replacement of the original equipment brackets to deliver the ideal fit and function to restore support of your ignition coil. The brackets are manufactured from quality materials and are designed to keep your ignition coils securely in place. Select the ignition coil bracket model that is better suited to your application needs.
Not Yet Reviewed
$7.99
—
$9.99
$7.19
—
$8.99
On Sale
Clearance
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$7.99
—
$9.99
$6.79
—
$8.49
On Sale
Yukon Gear & Axle differential cover bolts securely fasten your cover. They offer a selection of steel bolts to fit Dana, Ford, and GM covers. Order the bolts designed for your axle model application.
( 3 )
$7.89
$6.71
On Sale
ACCEL distributor rotors are the perfect replacements for stock rotors to help ignition systems fire reliably. ACCEL distributor rotors feature high conductivity, corrosion-resistant brass terminals, and stainless steel rotor springs for unrestricted spark energy flow. Pick up a new ACCEL distributor rotor and make your distributor happy.
( 20 )
$16.88
$9.28
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
